Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

Practical Considerations for the Use of Double-Flank Testing for the Manufacturing Control of Gearing - Part I - January/February 2014

Share |

Are you featured in this article? Put a link on your website!

Archive > 2014 > January/February 2014 > Practical Considerations for the Use of Double-Flank Testing for the Manufacturing Control of Gearing - Part I

The article "Practical Considerations for the Use of Double-Flank Testing for the Manufacturing Control of Gearing - Part I" appeared in the January/February 2014 issue of Gear Technology.

Summary
Part I of this paper describes the theory behind double-flank composite inspection, detailing the apparatus used, the various measurements that can be achieved using it, the calculations involved and their interpretation. Part II, which will appear in the next issue, includes a discussion of the practical application of double-flank composite inspection, especially for large-volume operations. Part II covers statistical techniques that can be used in conjunction with double-flank composite inspection, as well as an in-depth analysis of gage R&R for this technique.

Keywords
double-flank inspection, roll testing, master gears, backlash

The article "Practical Considerations for the Use of Double-Flank Testing for the Manufacturing Control of Gearing - Part I" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.