Dry Cutting of Bevel and Hypoid Gears - May/June 1998
The article "Dry Cutting of Bevel and Hypoid Gears" appeared in the May/June 1998 issue of Gear Technology.
High-speed machining using carbide has been used for some decades for milling and turning operations. The intermittent character of the gear cutting process has delayed the use of carbide tools in gear manufacturing. Carbide was found at first to be too brittle for interrupted cutting actions. In the meantime, however, a number of different carbide grades were developed. The first successful studies in carbide hobbing of cylindrical gears were completed during the mid-80s, but still did not lead to a breakthrough in the use of carbide cutting tools for gear production. Since the carbide was quite expensive and the tool life was too short, a TiN-coated, high-speed steel hob was more economical than an uncoated carbide hob.
The article "Dry Cutting of Bevel and Hypoid Gears" should appear in the box below, but if you do not see it, you can download it here.