Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

Hard Gear Finishing With CBN-Basic Considerations - May/June 1998

Share |

Are you featured in this article? Put a link on your website!

Archive > 1998 > May/June 1998 > Hard Gear Finishing With CBN-Basic Considerations

The article "Hard Gear Finishing With CBN-Basic Considerations" appeared in the May/June 1998 issue of Gear Technology.

Summary
For over 50 years, grinding has been an accepted method of choice for improving the quality of gears and other parts by correcting heat treat distortions. Gears with quality levels better than AGMA 10-11 or DIN 6-7 are hard finished, usually by grinding. Other applications for grinding include, but are not limited to, internal/external and spur/helical gear and spline forms, radius forms, threads and serrations, compressor rotors, gerotors, ball screw tracks, worms, linear ball tracks, rotary pistons, vane pump rotators, vane slots, and pump spindles.

Keywords
grinding, abrasives, ground gears, Coroning, honing, CBN

The article "Hard Gear Finishing With CBN-Basic Considerations" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.