Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

Effects of Profile Corrections on Peak-to-Peak Transmission Error - July 2010

Share |

Are you featured in this article? Put a link on your website!

Archive > 2010 > July 2010 > Effects of Profile Corrections on Peak-to-Peak Transmission Error

The article "Effects of Profile Corrections on Peak-to-Peak Transmission Error" appeared in the July 2010 issue of Gear Technology.

Summary
Profile corrections on gears are a commonly used method to reduce transmission error, contact shock, and scoring risk. There are different types of profile corrections. It is a known fact that the type of profile correction used will have a strong influence on the resulting transmission error. The degree of this influence may be determined by calculating tooth loading during mesh. The current method for this calculation is very complicated and time consuming; however, a new approach has been developed that could reduce the calculation time.

Keywords
transmission error, profile correction, crowning, software

The article "Effects of Profile Corrections on Peak-to-Peak Transmission Error" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.