Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

Cutting Low-Pich-Angle Bevel Gears; Worm Gears & The Oil Entry Gap - July/August 1992

Share |

Are you featured in this article? Put a link on your website!

Archive > 1992 > July/August 1992 > Cutting Low-Pich-Angle Bevel Gears; Worm Gears & The Oil Entry Gap

The article "Cutting Low-Pich-Angle Bevel Gears; Worm Gears & The Oil Entry Gap" appeared in the July/August 1992 issue of Gear Technology.

Summary
Question: Do machines exist that are capable of cutting bevel gear teeth on a gear of the following specifications: 14 teeth, 1" circular pitch, 14.5 degrees pressure angle, 4 degrees pitch cone angle, 27.5" cone distance, and an 2.5" face width?

Keywords
Gleason, gear planers, bevel gears, conical involute gears, taper gears, beveloid, oil entry gap, worm gears, hobbing, fly cutting, basics, shop floor

The article "Cutting Low-Pich-Angle Bevel Gears; Worm Gears & The Oil Entry Gap" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.