Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

Hypoloid Gear with Small Shaft Angles and Zero-to-Large Offsets - November/December 2009

Share |

Are you featured in this article? Put a link on your website!

Archive > 2009 > November/December 2009 > Hypoloid Gear with Small Shaft Angles and Zero-to-Large Offsets

The article "Hypoloid Gear with Small Shaft Angles and Zero-to-Large Offsets" appeared in the November/December 2009 issue of Gear Technology.

Summary
Beveloid gears are used to accommodate a small shaft angle. The manufacturing technology used for beveloid gearing is a special setup of cylindrical gear cutting and grinding machines. A new development, the so-called Hypoloid gearing, addresses the desire of gear manufacturers for more freedoms. Hypoloid gear sets can realize shaft angles between zero and 20° and at the same time, allow a second shaft angle (or an offset) in space that provides the freedom to connect two points in space.

Keywords
hypoloid, beveloid, automotive, bevel gears

The article "Hypoloid Gear with Small Shaft Angles and Zero-to-Large Offsets" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.