Login | Register

Sandvik Offers Cooling Technology Solutions (March 21, 2013)
Accurate targeting of coolant during machining provides maximum effectiveness in chip evacuation. However, precision and pressure are two...

Sandvik Introduces CoroMill 357 (March 7, 2013)
Sandvik Coromant introduces CoroMill 357, a new tough multi-edge face milling cutter for roughing and cubing in steel and cast iron with ...

Sandvik Breaks Ground in New Jersey (December 6, 2012)
Sandvik, and its tooling division, Sandvik Coromant, broke ground Friday, Dec. 3, 2012, on a location neighboring its current U.S. headqu...

Sandvik Launches New End Mill Series (November 6, 2012)
Sandvik Coromant has launched a new series of end mills for use in multiple materials. This new range is designed for high performance an...

Sandvik Offers CoroDrill 870 (October 8, 2012)
CoroDrill 870 is now available for both steel and cast iron drilling operations. The CoroDrill 870 is part of a new generation of exchang...

IMTS Preview: Sandvik Coromant (August 10, 2012)
The Sandvik Coromant Smart Hub at IMTS 2012 will focus on helping attendees discover new ways to boost their business through knowledge, ...

Sandvik Appoints Key Marketing Position (June 20, 2012)
Sandvik Coromant is pleased to announce the appointment of Ester Codina as the company's new marketing and communications manager, ma...

Sandvik Launches Light Cutting Insert (June 7, 2012)
Sandvik Coromant has launched a new, light cutting insert for its CoroMill 170 precision gear milling cutter. The -PL geometry flank inse...

Sandvik and Höfler Get Into Gear (May 11, 2012)
While Sandvik Coromant's tooling and machining solutions encompass a wide variety of metalworking industries, the focal point was rec...

Surgeons of Steel Visit Sandvik Coromant (May 4, 2012)
Sandvik Coromant, a producer of tools for the metal cutting industry, recently hosted 30 eighth graders from the Rockford, Illinois Eisen...

Sandvik Supports SkillsUSA National Championships (April 27, 2012)
Sandvik Coromant has joined the list of supporting partners at the 48th Annual SkillsUSA National Leadership and Skills Conference, which...

Sandvik Introduces New Turning Inserts (January 5, 2012)
March 1st 2012 sees the introduction of a new range of turning inserts from Sandvik Coromant. Spectrum turning is a minimum program that ...

Sandvik and Hofler Team Up in Schaumburg Productivity Center (November 22, 2011)
The collaboration between Sandvik Coromant and Höfler Maschinenbau began in 2009. Since then it has developed into several joint act...

Sandvik Offers Reduced Cutting Time with CoroMill 176 (November 8, 2011)
Sandvik Coromant recently introduced a new full profile hob for gear milling, CoroMill 176. This indexable carbide insert hob can reduce ...

Sandvik Coromant Partners with CCAT (October 26, 2011)
Sandvik Coromant has joined the Connecticut Center for Advanced Technology, Inc. (CCAT). The nonprofit ...

Klas Forsström Named Global President of Sandvik Coromant (October 21, 2011)
On September 1, 2011 Klas Forsström took over the position of global president of Sandvik Coromant, a supplier of cutting tools...

Coromant Capto Makes Light Work of Heavy Machining (October 13, 2011)
For all types of heavy machining operations in large components, Coromant Capto size C10, improves performance by allowing higher feeds a...

Gear Expo Preview: Sandvik Coromant Booth 827 (September 15, 2011)
Sandvik Coromant will showcase a number of its new gear tooling solutions and offers, ranging from roughing, semi-finishing and finishing...

Sandvik Offers Pitch-Perfect Threading Event (April 22, 2011)
Sandvik Coromant, a producer of cutting tools for the metal cutting industry, has announced that it will be holding a "Pitch-Perfect...

Sandvik Names New Director, Business Services (December 8, 2010)
Sandvik Coromant recently announced that Mike Verkamp has been named the company's new director, business services. In this position,...

Sandvik, Haas and ABB Robotics Celebrate Tech Center (November 29, 2010)
Sandvik Coromant recently participated in the grand opening ceremony of the Haas Technical Education Center (HTEC) at Vincennes Universit...

Sandvik Extends Sialon Grade Range (November 10, 2010)
Sandvik Coromant is extending its Sialon grade CC6060 range to support the turning and milling of heat resistant super alloys. These late...

Sandvik Introduces Precision Cutter for Gear Milling (November 5, 2010)
Sandvik Coromant has introduced the CoroMill 170 cutter that offers the potential for optimization of milling applications for large gear...

Sandvik Coromant Launches ISO S Insert Program (October 19, 2010)
Sandvik Coromant recently launched more than 300 inserts in a new series of optimized ISO S turning geometries with easy-to-choose guidel...

Sandvik Releases Free App for Cutting Data (October 11, 2010)
Sandvik Coromant has released a free App designed to provide engineers and machinists with a resource for calculating  cutting data....

Sandvik Coromant Appoints Aerospace Manager (June 21, 2010)
Sandvik Coromant recently announced the promotion of Kevin Mayer to the position of Manager of Aerospace. Prior to this appointment, Maye...

Sandvik Coromant to Present Tooling Innovation at IMTS 2010 (June 15, 2010)
Under the theme "The Road to Success Starts Here," Sandvik Coromant will be showcasing a broad range of tools at IMTS 2010. Wit...

Sandvik Coromant Sponsors Manufacturing Contest (May 18, 2010)
Sandvik Coromant recently sponsored a contest at Vincennes University in Vincennes, Indiana where 21 students from the school's Advan...

Sandvik Introduces Next Generation of Insert Grades (May 1, 2006)
The GC1030, GC4240 and GC4225 from Sandvik Coromant were designed to enhance productivity in steel milling operations. The GC1030 and ...

Sandvik Coromat and Camito Sign Cooperative Agreement (April 6, 2006)
Sandvik Coromant and Camito signed a cooperation agreement for further mutual development and improvement of the technology for machining...