Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

News for KISSsoft USA LLC

3719 N. Spring Grove Road
Johnsburg, IL 60051
USA
Phone: (815) 363-8823
Fax: (815) 363-8832

E-mail:

Web: www.kisssoft.com

KISSsoft Hosts ISO Workgroups (April 16, 2014)
During the week of April 7 to 11, several meetings of ISO Workgroups took place at KISSsoft AG headquarters. Workgroup 6, chaired by Pro...


KISSsoft Releases New Version of Software (April 7, 2014)
On April 7th, the industrial fair in Hanover opens its doors. At the same time, the new version of KISSsoft 03/2014 will be released with...


KISSsoft Offers Customized Software Options (March 13, 2014)
Simple and intuitive handling is the basis for comfortable and efficient work with a software. In KISSsoft, there are several possibiliti...


KISSsoft Releases 2014 Beta (January 22, 2014)
The KISSsoft 03/2014 Beta Version has now been released for a test run. The final release will be available from April 7th, 2014 - just i...


KISSsoft Offers Highlights to KISSsys (January 16, 2014)
KISSsys, KISSsoft‘s system add-on, enables you to model complete gear units and drive trains (module SYS). The "KISSsys assist...


Gear Expo Preview: KISSsoft Booth 717 (August 9, 2013)
KISSsoft will be presenting the latest release of the software, Version 03/2013. The latest version of KISSsoft incorporates the newest a...


KISSsoft Extends Assistants (June 14, 2013)
In the KISSsoft Release 03/2013, the current KISSsys assistants were extended and furthermore a planet assistant was added. These assista...


KISSsoft Wins Industry Award (May 1, 2013)
The Huber Verlag für Neue Medien GmbH awards the INDUSTRIEPREIS to companies with high economic, social, technological and environm...


KISSsoft Releases Latest Software Update (April 16, 2013)
KISSsoft is a modular calculation system for the verification, optimization, and sizing, of machine elements. The scope of the applicatio...


KISSsoft Offers Simplified Modelling (December 26, 2012)
In the KISSsoft Release 03/2012, several assistants for the model building in KISSsys were implemented (module SYS). They facilitate and ...


KISSsoft Offers Profiles for Worm Wheel (October 31, 2012)
In the KISSsoft Release 03/2012, the profiles for worms with enveloping worm wheel were enhanced. The 3-D models for the profile types N,...


KISSsoft Offers Load Distribution According to ISO 6336 Annex E (September 4, 2012)
The load distribution in the axial direction of cylindrical gears can be calculated very efficiently according to the calculation method ...


KISSsoft Offers Bolt Calculation with FE Results (August 16, 2012)
In KISSsoft, the calculation of bolts in accordance with VDI 2230 is implemented as specified in Sheet 2 (SPK module). The draft version ...


KISSsoft Celebrates Suter Racing Lead (June 19, 2012)
KISSsoft AG, technology partner of Suter Racing, congratulates Tom Lüthi for his world championship lead in the Moto 2 class. The so...


KISSsoft Announces Software Updates (May 10, 2012)
There are numerous new features implemented for KISSsoft 03/2012. Highlights include: The contact analysis was improved with a new m...


KISSsoft Releases Beta Version of Software (March 1, 2012)
The KISSsoft 03/2012 Beta Version has now been released for a test run. The final release will be available fon  April 23rd, 2012 - ...


KISSsoft Campbell Diagram Calculates Speed Range (February 2, 2012)
For the calculation of shaft eigenfrequencies, the Campbell diagram is a very helpful tool for better understanding the cr...


KISSsoft Offers Optimization of Profile Corrections (January 12, 2012)
An important step in terms of noise and strength optimization of a gear pair is the optimal design of the micro-geometry.Thereby a combin...


KISSsoft Releases 3-D Variant Skin Model (November 17, 2011)
Crossed helical gears are helical gears that are mounted on crossed axes. The shaft angle is usually Σ = 90 degrees. In contrast to...


Gear Expo Preview: KISSsoft Booth 408 (October 5, 2011)
KISSsoft is a software provider for gear design to AGMA, ISO and DIN Standards as well as intuitive custom inputs. They offer shaft and b...


KISSsoft Offers Gearbox Variant Calculations (September 1, 2011)
With KISSsys, gearbox variants can now be calculated very efficiently (module KS1). In contrast to the GPK-models, where within the fixed...


KISSsoft Releases Bearing Calculation Module (August 5, 2011)
For the bearing calculation in KISSsoft, a new module is available (module WB4). This module permits the calculation of a single bea...


KISSsoft Updates Features in the Contact Analysis (July 13, 2011)
In the contact analysis of KISSsoft, the effects of shaft deformations may now be precisely evaluated (module ZA30). The results of shaft...


Kisssoft Calculates Flank Breakage (May 20, 2011)
The flank breakage of gears is a failure mode that is separate from the damage forms such as root breaking or pitting. Consequently, it a...


KISSsoft Releases Sabic Data (May 5, 2011)
In the current KISSsoft Release 03/2011, two additional new data sets for plastic materials from Sabic are available: VERTON RVL36 now wi...


Compression Spring Relaxation Available for KISSsoft (March 11, 2011)
The phenomenon of relaxation occurs in constant static loads of springs, which finally lead to time-dependent changes of t...


KISSsoft Releases First iPhone App (January 18, 2011)
KISSsoft recently announced that its first free iPhone app, Hardness Conversion, is now available. This iPhone application easily&nb...


KISSsoft Software Tested at TC60/WG15 Meeting (November 23, 2010)
A recent meeting of the workgroup TC60/WG15 took place considering the ISO Technical Report ISO TR 15144-the calculation of risk regardin...


KISSsoft Implements Spline Connections (October 26, 2010)
Due to numerous requests from the industry, the spline connections according to DIN 5481 and DIN 5482 were recently implemented in K...


KISSsoft Releases New Function for Face Gears (September 9, 2010)
A new functionality to generate a solid model of a face gear with arbitrary shaft angle and offset is implemented in the development vers...


Software Update Includes Calculation Method for Scuffing (June 18, 2010)
In the release 04/2010, the calculation of flash and integral temperature according to ISO/TR 13989-1 and 13989-2 is available. With...


KISSsoft Releases Newest Version of ISO/CD TR 15144 (May 12, 2010)
In the hitherto existing draft ISO/CD TR 6336-7, the information for the definition of the permissible specific lubri...


KISSsoft Update Integrates Parasolid CAD Core (April 26, 2010)
The machine element package by KISSsoft for the design and optimization of components like gears, shafts, bearings and others is now avai...


Kisssoft Releases Synchronization Procedures for KISSsys (March 10, 2010)
Conventional vehicle gearboxes include a gear shifting mechanism that can be constructed with several different methods (sliding gears, c...


White Electronic Designs Introduces Medical CompactFlash Cards (January 29, 2006)
White Electronic Designs Corp. announces the availability of its Medical Series 1 CompactFlash cards. According to the company’s...


KISSsoft AG Moves to New Facility (January 27, 2006)
KISSsoft AG has moved their facilities to a new location. New contact information is: Main office number +41-55-254-20-30 Hotline:...


KISSsoft and Geartech Jointly Develop New Software Program (January 19, 2006)

KISSsoft AG and GEARTECH Software are pleased to announce the introduction of a new and updated version of GEARCALC, a gear design pro...