Fundamentals of Gear Design (May 17-19)
University of Wisconsin School of Continuing Education, Milwaukee, WI. $1,095. Instructor is Ray Drago. Read More 14th Annual Gear Failure Analysis Seminar (June 20-21)
Big Sky Resort, Big Sky, MT. Atendees should plan to come away with a complete knowledge of gear failure. Various types of gear failure s... Read More Environmental Waste & Processes (August 8-10)
Embassy Suites Pleasant Hills, Walnut Creek, CA. Session topics include environmental risk assessment, small waste to energy plant APC re... Read More Gear Noise Short Courses at The Ohio State University (September 8-10)
Basic Gear Noise Short Course, September 8-10, 2004
The Ohio State University, Department of Mechanical Engineering
The Basic Gear ... Read More 13th Annual Gear Failure Analysis Seminar. (Sept 14)
Big Sky Resort, Big Sky, MT. Attendees will examine macropitting, micropitting, scuffing, tooth wear and breakage and their possible caus... Read More International Manufacturing Technology Show (September 8-15)
McCormick Place, Chicago, IL. Designed for individuals involved in any aspect of manufacturing and engineering. Registration is free for ... Read More PC Applications in Parallel Axis Gear System Design and Analysis (Sept 17)
7th floor, School of Continuing Education, University of Wisconsin?Milwaukee, Milwaukee,WI. A new PC tool, PowerGear, is demonstrated to ... Read More Metal Gear Design & Manufacturing (September 21-24)
UTS facility, Rockford, IL. Curriculum includes basic gear geometry, design and manufacturing, manufacturing issues and their effect on g... Read More KISSsoft Shaft and Gear Analysis Seminar (October 6-8)
The Neterlands
The first day is an introduction to calculations using KISSsoft, followed by theory as well as working practice of shaft ... Read More Bevel Gear Systems (October 20-22)
7th floor, School of Continuing Education, University of Wisconsin-Milwaukee, Milwaukee,WI. Aimed at the gear user, designer and beginnin... Read More AGMA 2004 Fall Technical Meeting (October 24-26, 2004)
The Pfister Hotel, Milwaukee,WI. Highlights include an awards luncheon and special presentation by Ray Drago. Technical sessions include ... Read More Variable Frequency Drives Seminar (Oct 26-28)
Ramada Inn at the Portland Airport, Portland, OR. This three-day seminar teaches attendees energy saving techniques, power transmission p... Read More Plastic Gear Design & Manufacturing (October 26-29)
UTS facility, Rockford, IL. Basic and advanced topics are covered, from the fundamentals to profile analysis, tool design and tooling sel... Read More Geometric Designing and Tolerancing (Oct 29)
School of Continuing Education, University of Wisconsin,Milwaukee, Wisconsin. This course provides the foundation for GD&T that is requir... Read More Gear Design & Loading Workshop (November 1)
Coors Visitors Center (The Bass Museum), Burton-on-Trent, U.K. Designed for gear industry professionals seeking a better understanding of... Read More Fundamentals of Brushless DC Motor Control (November 3, 2004)
Marriott St. Louis Airport Hotel,St. Louis, MO. Presents the concepts required for design and field application engineers to assist in de... Read More Maximizing CNC Machine Tool Utilization (November 16-18)
SME headquarters, Dearborn, MI. Designed for CNC programmers, CNC setup personnel, manufacturers and machine tool professionals. Includes... Read More Dimensioning and Tolerancing Principles for Gages and Fixtures (November 17-19)
School of Continuing Education, University of Wisconsin, Milwaukee. Milwaukee, WI. This course is suitable for professionals interested i... Read More KISSsoft Shaft Analysis Seminar (November 26)
Zuria, Switzerland.
This seminar focuses on method of balancing shaft requirements as well as a refined analysis method to asses the fat... Read More Variable Drives Frequency Course (December 7-9)
Teaches attendees energy saving techniques, power transmission principles (speed, torque and horsepower), bypass systems, speed/torque co... Read More Gear School 2004 (December 13-16)
Gleason Cutting Tools facility, Rockford, IL. Broken into sessions called Fundamentals, High Speed Steels and Coatings, Cutting the Gear,... Read More Smart Solutions for Metal Cutting Conference. (February 2-3)
Dorint Sofitel Quellenhof, Aachen, Germany. Held in both German and English, this conference will focus on the most recent developments i... Read More Expo Manufactura (February 22-24)
Cintermaz Expo Center, Monterrey, Mexico. Mexico's largest machine tool and metalworking exposition. Sponsored by the AMT, registrati... Read More National Manufacturing Week (March 7 -10)
McCormick Place, Chicago, IL. Broken into ten segments: Aluminum, CleanTech, Design Engineering, Enterprise IT, EnviroTech, Industrial A... Read More AGMA’s 89th Annual Meeting (March 10-12)
Marco Island Marriott Resort, Marco Island, FL. Guest speakers include Terrell Hansen of The Boeing Corp., Dr. Tom Duesterberg of The Man... Read More International Exposition for Power Transmission (March 15-19)
North America's largest international exposition developed for hydraulic, pneumatic, electrical and mechanical power transmission com... Read More International Fluid Power Expo (March 15-19,)
Las Vegas Convention Center, Las Vegas, NV. Devoted entirely to power transmission and motion control. Advance attendee exhibit-only regi... Read More Metalform ’05 (March 20-23)
Donald Stevens Convention Center, Rosemont, IL. North American premier fabricating and forming expo and conference sponsored by the Preci... Read More WESTEC Advanced Productivity Exposition (April 4-7)
North America’s largest metalforming and manufacturing exhibition. The WESTEC 2005 Conference is held alongside the event. Pavillion... Read More Industrial Heat Treating Equipment Association Annual Meeting (April 13-16)
J.W. Marriott Starr Pass Resort & Spa, Tuscon, AZ. On this year’s agenda are various committee meetings, seminars on Internet busine... Read More Plastic Gear Technology Seminar (April 26-27)
Universal Technical Systems facility, Rockford, IL. An introductory course in plastic gearing. Attendees will discuss case studies involv... Read More The Fundamentals of Parallel Axis Gear Manufacturing (May 24-26)
Pheasant Run Hotel & Conference Center, St. Charles, IL. Seminar includes computer-based visual aids, text and interactive presentations ... Read More EASTEC 2005 Advanced Productivity Exposition (May 24-26)
Eastern State Expo Center, West Springfield, MA. The only regional event bringing together buyers and sellers of machine tools and metalw... Read More Decision Tools for a Lean Manufacturing Environment. (May 24-26)
TechSolve facility, Dayton, OH. Concentrates of the collection of machining data and utilizing it to make lean machining decisions, commu... Read More KISSsoft Calculation Programs. (June 6-8)
KISSsoft facility, Zurich, Switzerland. The first day is an overview of KISSsoft and shaft/bearing calculation methods. June 7?8 are dedi... Read More 2005 Automotive Parts Product Solution Fair (June 15-18)
Tokyo International Exhibition Center, Tokyo, Japan. Sponsored by the Nikkan Kogyo Shimbun Ltd. (The Business & Technology News) with the... Read More New Concepts in Gear Design (June 29, 2005)
Webseminar from Omnexus. Focuses on New Concepts in Gear Design: Innovative Materials for Extending Gear Design Possibilities. The course... Read More Machine Components 2005 (June 7-10, 2005)
The 2005 International Gear Technology Exhibition for China and the 2005 International Fastener Technology Exhibit for China. Read More 9th International Conference on Shot Peening (September 6-9, 2005)
UMLV, Copernic Building, Paris, France. Focuses on shot peening, deep rolling, laser peening, ultrasonic peening, combined and cold work ... Read More 44th Waterjet Cutting Technologies Course (September 13-15, 2005)
Richel Inc.corporate office, Kent, OH. Aimed at all waterjet operators and owners as well as anyone looking to buy or install a system bu... Read More Advances in P/M Gear Technology Seminar (September 13-14)
Crowne Plaza at Detroit Metro Airport, Romulus, MI. Presents a future outlook for P/M gearing as well as the automotive industry’s c... Read More Basic Gear Noise Short Course (September 13-15)
Department of Mechanical Engineering at Ohio State University, Columbus, Ohio. Designed for noise specialists and gear designers who enco... Read More 3rd International Conference on Gears (September 14-16, 2005)
Munich, Germany. Co-sponsored by the AGMA, ASSIOT, CMES, FVA, JSME, KIVI-NIRIA, UNITRAM and VDMA. Read More ASM Heat Treating Society Conference & Exposition (September 25-28)
David L.Lawrence Convention Center, Pittsburgh PA. North America's largest heat treating exposition. This year's technical semina... Read More Wisconsin Manufacturing & Tool Expo (September 27-29, 2005)
Wisconsin State Fair Park, Milwaukee, WI. The 9th bi-annual show is introducing this year plastics manufacturing and production technolog... Read More International Construction and Utility Equipment Expo (September 27-29, 2004)
Kentucky Fair and Expo Center, Louisville, KY. Sponsored by the Association of Equipment Manufacturers, this interactive expo hopes to re... Read More European Power Transmission Distributors’ Association (September 28-30)
Hilton Hotel, Prague, Czech Republic. The theme of this year's meeting is "Meeting New Challenges" and focuses on forming alliances a... Read More New Technology Broaching Seminar (October 11)
Holiday Inn Fairlane-Dearborn, MI. Seminar focuses on the broaching machines and cell integrations, improving part quality characteristic... Read More Mastering Shot Peening & Blast Cleaning (November 1-3)
Renaissance Worthington Hotel, Dallas/Fort Worth, TX. Focuses on proper shot peening procedures, products and plotting a saturation curve... Read More ASME International Mechanical Engineering Congress and Expo (November 5-11)
Walt Disney World Swan & Dolphin Hotel, Orlando, FL. Technical program includes engineering research presentations broken down into 600 s... Read More AGMA Gear Basics Course (December 5-7)
Contour Hardening Inc., Indianapolis, IN. Designed for machine operators to manufacturing engineers, the course teaches students about tr... Read More POWER-GEN International (December 6-8)
Sands Expo Center, Las Vegas, NV. The world's largest power generation conference. Technical tours of the APEX Generating Station and... Read More Plastic Injection Mold Design Basics (December 12-14)
Holiday Inn on the Bay, San Diego, CA. The seminar covers every major component of an injection mold and is designed for tooling engineer... Read More Plastics Injection Mold Design Advanced (December 15-16)
Holiday Inn on the Bay, San Diego, CA. This course offers a more detailed look at the specific inner workings of an injection mold, stres... Read More KISSsoft Software Training Class (January 10-11)
MicroTek Oakbrook Training facility, Oakbrook IL. Content for this seminar is broken into two categories: Theories of Geometry and Streng... Read More Manufacturing for Performance Conference & Exhibits (January 23-25)
Indiana Convention Center, Indianapolis, IN. Attendees will see technologies that can improve operations for motor sports vehicles and co... Read More PC Applications In Parallel Axis Gear System Design and Analysis (Feb. 22-24)
University of Wisconsin School of Continuing Education, Milwaukee, WI. Taught by Ray Drago. $1,195. Read More Expo Manufactura (March 7-9)
Cintermex, Monterrey, Mexico. Mexico’s leading machine tool and metalworking expo. Technology is broken into machine tools, CAD/CAM ... Read More Metal Gear Design and Manufacturing (March 7-10)
UTS facility, Rockford, IL. This class begins with basic gear theory and proceeds through such advanced topics as minimum weight design ... Read More Innovations in Bevel Gear Technology (March 14-15)
WZL, Aachen University, Aachen, Germany. The seminar focuses on innovations and new approaches to bevel and hypoid gears and is scheduled... Read More AGMA/ABMA Annual Meeting. (March 15-17)
Marco Island Marriott Resort, Marco Island, FL.Read More Geometric Dimensioning and Tolerancing (March 22-24)
University of Wisconsin-Milwaukee School of Continuing Education. Taught by James Meadows. $1290. Read More WESTEC 2006 Expo and Conference (March 27- 30)
Los Angeles Convention Center, Los Angeles, CA. Sponsored by the Society of Manufacturing Engineers, this event showcases the latest auto... Read More Basic Course for Gear Manufacturing. (April 3-7)
Richard J. Daley College, Chicago, IL. This course teaches students to set up machines for maximum efficiency, inspect gears accurately ... Read More Detailed Gear Design: Beyond the Simple Service Factors (April 5-7)
Flamingo Hotel, Las Vegas, NV. An intensive seminar to help designers understand gear rating and analysis factors, ISO/AGMA analysis meth... Read More Design2Part Show (April 19--20)
Northern Kentucky Convention Center, Covington, KY. Features more than 130 nationwide contract source for forming, fabricating, finishing... Read More Plastic Gear Design & Manufacturing. (April 25-28)
. Universal Technical Systems, Rockford, IL. Focuses on robust design methods, application of non-standard proportions, material properti... Read More Designing Products for Assembly (May 2-3)
Madison Concourse Hotel, Madison, WI. An intensive course sponsored by the University of Wisconsin at Madison focusing on assembly method... Read More Taipei International Manufacturing Technology Show (May 3-7)
Taipei, Taiwan. A general, integrated manufacturing technology and equipment trade fair showcasing Taiwan's capabilities in machinery... Read More KISSsoft Gear Calculation Seminar (May 8-11, 2006)
KISSsoft facility, Rapperswil, Switzerland. Subject matter includes properties of gear and taking them into account during the sizing/opt... Read More AGMA Regional Gear School (June 5-7)
Star SU facility, Hoffman Estates, IL. Concentrates on the relationships between the basic geometry of parallel axis gears and the inspec... Read More UTS Gear Design and Manufacturing (June 6-8)
UTS facility, Rockford, IL. This course focuses on metal gear design and manufacturing. Topics include hobbing and shaping as well as tip... Read More Advanced Gear Design & Theory (June 28-30)
University of Wisconsin-Milwaukee, Milwaukee, WI. Ray Drago is instructing this course. $1,095. Read More AGMA’s Gear Manufacturing Technical Course (August 7-9)
Liebherr facility, Saline,MI. Course focuses on gear theory, inspection, manufacturing, hobbing, shaping, production estimating, hard fin... Read More Plastic Injection Mold Design Basics (August 21-23)
University of Wisconsin-Milwaukee School of Continuing Education. The course is instructed by Jim Walsh. $990. Read More Plastic Injection Mold Design Advanced (August 24-25)
University of Wisconsin-Milwaukee School of Continuing Education. Instructor is Jim Walsh. $790. Read More Basic Gear Noise Short Course (September 13-15)
Ohio State Department of Mechanical Engineering, Ohio State University, Columbus, OH. Designed for gear designers and noise specialists w... Read More AGMA Training School for Gear Manufacturing-Basic Course (September 11-15)
Richard J. Daley College, Chicago, IL. Offers classroom and hands-on training in gearing and nomenclature, principles of inspection, gear... Read More Basic Gear Noise Short Course. (September 13-15)
Department of Mechanical Engineering, Gear Dynamics and Gear Noise Research Laboratory, Ohio State University, Columbus, OH. Fundamentals... Read More Advanced Gear Noise Short Course (September 18-19)
Department of Mechanical Engineering, Ohio State University, Columbus, OH. Attendees will select from the following topics: Analytical an... Read More Gear Failure Analysis Seminar. (September 18-19)
Big Sky Resort, Big Sky, MT. Participants examine types of gear failure, such as macropitting, micropitting, scuffing, tooth wear and bre... Read More Advanced Gear Noise Short Course (September 18-19)
Department of Mechanical Engineering, Gear Dynamics and Gear Noise Research Laboratory, Ohio State University, Columbus, OH. This is dire... Read More UTS Gear Design and Manufacturing Course (September 19-21)
UTS facility, Rockford IL. Class begins with basic gear theory and proceeds to discuss topics such as minimum weight design strategies, g... Read More Fundamentals of Gear Design (September 20-22)
University of Wisconsin-Milwaukee School of Continuing Education. University of Wisconsin-Milwaukee. This course is taught by Raymond Dra... Read More Assembly Tech Expo (September 25-28)
Donald E. Stephens Convention Center, Rosemont, IL. Conference takes place Sept. 25-28 and the exhibitation occurs Sept. 26-28. Technolog... Read More Gear China 2006 (September 25-28)
Shanghai International Exhibition Center, Shanghai, China. Under the canopy of 2006 China International Machine Components Industry Exhib... Read More Gear Manufacturing Technology Course (October 10-12)
Perry Technology facility, New Hartford, CT. Course focuses on gear theory, inspection, manufacturing, hobbing, shaping, production estim... Read More Expo MetalMecanica (October 10-12)
Expo Gudalajara Expo Center, Gudalajara, Mexico. An exhibition of tools, equipment, supplies and services for the metalworking industry o... Read More AGMA Fall Technical Meeting (October 22-24)
Orlando, FL. Share ideas on the design, manufacturing and application of gears, gear drives and related products. Read More UTS Plastic Gear Design & Manufacturing (October 24-26)
UTS facility, Rockford, IL. Focuses on topics such as knowledge of robust design methods, application of non-standard proportions, genera... Read More Shot Peening Blast Cleaning Workshop (Oct 31 - Nov 2)
Three days of intensive instruction on all aspects of the shot peening and blast cleaning industry. Product design engineers, machine ope... Read More 2006 Motor and Motion Association Fall Technical Conference (November 1-3)
Marriott St. Louis Airport Hotel, St. Louis, MO. Presentations, break-out sessions and tabletop exhibits focus on design, materials, perf... Read More Advanced Gear Design and Theory (November 8-10)
University of Wisconsin?Milwaukee, Milwaukee, WI. Users, beginning gear technologists and gear designers learn about proper selection, de... Read More UTS Gear Design & Manufacturing (November 14-16)
UTS facility, Rockford IL. Class begins with basic gear theory and proceeds to discuss topics such as minimum weight design strategies, g... Read More Aerospace Design and Development Show (November 14-16)
. Anaheim Convention Center, Anaheim, CA. Design engineers, suppliers, development engineers and managers working in airframe, components... Read More Gears 2006 (November 16-17)
Holiday Inn at the Manchester Airport, Manchester U.K. The first day's seminar is broken down into the following categories: process ... Read More AGMA’s Gear Manufacturing Technology Course (December 4-6)
RP Machine, Statesville, NC. Course focuses on gear theory, inspection, manufacturing, hobbing, shaping, production estimating, hard fini... Read More Gear School 2006 (December 4-7)
Gleason Cutting Tools facility, Loves Park, IL. Covers gear cutting, forming, generating, shaping, hobbing, tool tolerance vs. gear toler... Read More Gearbox CSI (February 14-16)
Lake Buena Vista Resort, Buena Vista (Orlando), FL.Forensic analyses of gear and bearing failures demonstrate that only a few of gearbox ... Read More Lean IT Workshop with Jean Cunningham (February 19-20)
Holiday Inn-Elk Grove, 1000 Busse Road, Elk Grove Village, IL. If an IT system has a choke hold on the company's lean journe... Read More International Conference on Powder Injection Molding of Metals, Ceramics and Carbides (February 21-23)
Royal Plaza Hotel, Lake Buena Vista (Orlando), FL. Highlights include presentations on the latest PIM standards and the Global Powder Met... Read More HOUSTEX 2007 Exposition & Conference (March 6-8)
George R. Brown Convention Center, Houston,TX. HOUSTEX will be co-located with the International Pump Users Symposium presented by the Te... Read More UTS Gear Design & Manufacturing. (March 6-9)
UTS facility, Rockford, IL. The course aims to provide a fundamenta... Read More Expo Manufactura (March 13-15)
Cintermex, Monterrey, Mexico. Metalworking and manufacturing event ... Read More Spring Furnace Seminar (March 12-15)
Holiday Inn Express, Meadville, PA. Topics include improvements in technologies, design and efficiency for heat processing as well as the... Read More AGMA/ABMA Annual Meeting (March 15-17)
Marco Island Marriott Resort, Marco Island, FL.
Discussions include Dr. Mike Bradley's Report on the Economy, American Politics: Loo... Read More KISSsoft Software Training (March 21-22)
MicroTek Orlando facility, Orlando, FL.Dr. Stefan Beermann, KISSsoft founder and vice president, will be conducting the course. Class siz... Read More Makino’s 5-Axis Machining Solutions Webinar (March 27)
Makino’s online seminar introduces advantages of five-axis machining, including how new levels of sustained dynamic accuracy are ac... Read More WESTEC 2007. (March 26-29)
Los Angeles Convention Center, Los Angeles, CA. Exhibitors include ... Read More 2007 Plastics Parts Innovations Conference and New Product Design Competition (April 1-3)
Peabody Hotel, Memphis, TN. The SPI Alliance of Plastics Processors (APP) is accepting abstracts or proposals for technical presentations... Read More Hannover Messe World Trade Fair for Industrial Technology (April 16-20, 2007)
Hannover Fairgrounds, Hannover, Germany. The 2007 exhibit program includes Industrial Automation; Motion, Drive & Automation; Digital Fac... Read More 3D Scanning: Reverse Engineering, Inspection and Analysis (May 1-2)
. Marriott Detroit at the Renaissance Center Hotel, Detroit, MI. Co-located with the Rapid 2007 Conference and Expo. Focuses on short ra... Read More RAPID 2007 Conference & Expo (May 1-3)
Marriott Renaissance Center, Detroit, MI. RAPID 2007 is North America's largest annual rapid manufacturing conference & exposition. T... Read More Interoperability and 3D Collaboration (May 3, 2007)
Marriott Renaissance Center, Detroit, MI. This international conference provides an opportunity for design, engineering, and manufacturin... Read More Society of Tribologists and Lubrication Annual Meeting & Exposition (May 6-10)
Marriott Hotel, Philadelphia, PA. Meeting highlights include 400 technical presentations,
10 one-day education courses ,80 exhibitors d... Read More Modern Furnace Brazing (May 9-11)
Holiday Inn, Madison Heights, MI. Design, metallurgical and production engineers will learn about such topics as joint selection, interac... Read More RoboBusiness 2007 (May 15-16)
John B. Hynes Veterans Memorial Convention Center, Boston, MA. Covers commercial applications of mobile robotics and intelligence systems... Read More PowderMet 2007--International Conference on Powder Metallurgy and Particulate Materials (May 13-16, 2007)
Colorado Convention Center, Denver, Co. Worldwide event featuring the latest in PM Equipment, powders, products and services. Internation... Read More 10th International Metal Finishing News Shot Peening Workshop and Trade show (May 15-17)
Hilton Clearwater Beach Resort, Clearwater, FL. Seminar consists of FAA-approved basic, intermediate and advanced courses. Hands-on train... Read More Gear Design Seminar--Beyond Simple Service Factors (May 16-18)
Lago Mar Resort, Fort Lauderdale, FL.Taught by Ray Drago, Drive System Technology, this course is designed for gear engineers, designers,... Read More EASTEC 2007 Expo (May 22-24)
Eastern States Exposition Center, West Springfield, MA. Attendees include manufacturers and buyers from the aerospace, defense, medical, ... Read More Designing Plastic Parts for the Injection Molding Process (June 4-5)
University of Wisconsin-Milwaukee School of Continuing Education, Milwaukee, WI. Participants learn about selecting the appropriate plast... Read More 2nd WZL Gear Conference in the U.S. (June 6)
Travis Pointe Country Club, Travis Pointe, MI. This year's gear conference is hosted by the Sigma Pool, a gearing partnership of Lieb... Read More AGMA’s Gear Manufacturing Technology Course (June 11-13)
Lieberr Gear Technology Center, Saline, MI. Geoff Ashcroft and Ron Green present theory as well as practical aspects of gear manufacturin... Read More ECM Seminar for Heat Treating (June 13, 2007)
Plymouth, MI. One-day technical seminar on new technologies for gas quenching and low pressure vacuum carburizing; research and developme... Read More Automation Technology Expo East (June 12-14)
Jacob K. Javits Convention Center, New York, NY. Four shows are co-located within this event:
MD&M East--For the medical device and ma... Read More GIMT + AMB China 2007 (June 14-17)
Guangzhou International Convention and Exhibition Center, The GIMT, South China’s leading machine tool exhibition, will be combined ... Read More 31st Annual Vibration Institute Meeting & Symposium. (June 19-22)
Menger Hotel, San Antonio, TX. The four-day course includes a keynote address on annular gas seals and their impact on rotodynamics as we... Read More KISSsoft Calculation Program Seminar (June 25-28)
KISSsoft facility, Rapperswil, Switzerland. Dr. Kissling, a member of the Swiss Standard Association, will teach a range of subjects incl... Read More Powder Metallurgy Basic Short Course (July 16-18)
Penn Starter Conference Center Hotel, State College, PA. Highlights include technical sessions discussing designing for PM, how metal pow... Read More India Machine Tools Show 2007 (July 24-27)
Pragati Maidan, New Dehli, India. Exhibitor profiles includeheavy machinery; machine tools; CNC and SPM; hand tools; cutting tools; power... Read More 9th EASTPO International Machine Tool Fair (July 25-28)
Shanghai New International Exhibition Center, Shanghai, China. Exhibits are separated into the following catagories: Machines, Forming Fa... Read More Centerless Grinding Technical Seminar (August 14)
Cinetec Grinding facility, Farmington Hills, MI. Topics to be covered include principles of machine setup, generating part geometry, regu... Read More Gear Manufacturing Technology Seminars (August 21, 2007)
Lyon Oaks Golf Course Club House. Wixom, MI. Hosted by Mitsubishi Heavy Industries America Inc. Program includes seminars covering gear b... Read More Korean Technology Transfer Seminar (August 24)
Seoul Venture Town, Korea. This seminar focuses on planetary gearbox modeling. Other topics include gearbox design and analysis, NVH, gea... Read More 10th International Power Transmission and Gearing Conference (September 4-7)
Rio All-Suite Hotel, Las Vegas, NV. This conference program is separated into 10 areas including gear design and analysis; gear strength ... Read More Romax Technology USA Users Conference (September 10-12)
Detroit, MI. Presentations include various transmission engineering topics such as bearings, gearing, NVH, advanced transmission concepts... Read More Basic Gear Noise Short Course (September 12-14)
Department of Mechanical Engineering, Ohio State University, Columbus, OH. Offered for gear designers and noise specialists who encounter... Read More AGMA Training School for Gear Manufacturing (September 10-14)
Richard J. Daley College, Chicago, IL. The basic course offers classroom and hands-on training in gearing and nomenclature; principles of... Read More Korean Technology Transfer Seminar. (September 14)
Seoul Venture Town, Korea. This seminar focuses on planetary gearbox analysis. Other topics include gearbox design and analysis, NVH, gea... Read More Advanced Gear Noise Short Course (September 17-18)
Department of Mechanical Engineering at Ohio State University, Columbus, OH. This advanced session is an extension of the Basic Gear Nois... Read More ASME Bronze Level Lean Certification Review and Exam (September 18-19)
Atlanta, GA. The Association for Manufacturing Excellence sponsored Bronze-level exam is the first step in the process and the seminar in... Read More ASME Heat Treating Society Conference and Expo (September 17-19)
Cobo Center, Detroit, MI. The conference occurs from September 17-19 and the expo on September 18-19. The technical program is broken int... Read More Great Lakes 2007 Expo & Conference (September 18-20)
DeVos Place, Grand Rapids, MI. A new exposition and conference showcasing manufacturing innovations and emerging technologies to help adv... Read More Basics of Bevel and Hypoid Gears (September 17-20)
Zurich, Switzerland. This course is limited to 10 participants and conducted in German. Topics include gear cutting systems, gear geometr... Read More EMO Hannover (September 17-22)
Hannover Fairgrounds, Hannover, Germany. Featuring products and services for metalworking technology, with special emphasis on machine t... Read More Romax Technology European Users Conference (September 25-26)
Cologne, Germany. Detroit, MI. Presentations include various transmission engineering topics such as bearings, gearing, NVH, advanced tra... Read More Assembly Tech Expo (September 25-27)
Donald E. Stephens Convention Center, Rosemont, IL. Co-located with Quality Expo and National Manufacturing Week. For registration inform... Read More KIMoS Basics (September 24-27)
Zurich, Switzerland. This course is limited to 8 participants. Topics include:Repetition of basic theory and spiral bevel gearsKIMoS modu... Read More Makino’s Tool and Die Expo (September 25-27)
Makino Technology Center, Auburn Hills, MI. Tool, die and mold makers have the opportunity to listen to keynote speakers address customer... Read More ISAAT at SME International Grinding Conference (September 26-28)
Hyatt Regency Hotel, Dearborn, MI. ISAAT2007 (International Symposium on Advanced Abrasive Technology) along with the SME International G... Read More Problem Reporting, Root Cause Analysis, & Corrective Action (September 27-28)
Learning Outcomes: Upon completion of this seminar, one will be able to:
·Understand problem reporting, root cause analysis and correct... Read More Quality & Environmental Auditing - ISO 19011 (October 1-2)
Learning Outcomes:
. Understand and use quality and environmental audit terminology;
. Establish the audit objectives as "compliance-ba... Read More SOUTH-TEC 2007 Expo & Conference (October 2-4)
Charlotte Convention Center, Charlotte, NC. In 2007, SOUTH-TEC also features SME Motorsports Charlotte exhibits, which are geared toward ... Read More Gear Expo 2007 (October 7-10)
Cobo Center, Detroit, MI. "The Worldwide Gear Industry Event". This year's show promises 200 exhibitors with more than 60 g... Read More Advanced Techniques for Pore Size Structure, Characterization, Theory and Practice (October 9-11)
Porous Materials headquarters, Ithaca, NY. Attendees learn the basics and catch up on advances in porous characterization techniques. Sig... Read More PTC Asia 2007 (October 10-13)
Shanghai New International Expo Center, Shanghai, China. Exhibition for power transmission and control, fluid power (hydraulics and pneum... Read More Gear Manufacturing Technology Course (October 15-17)
Perry Technology Co., New Hartford, CT. Instructors Geoff Ashcroft and Ron Greene aim to teach participants gear theory as well as practi... Read More Power Transmission Distributors’ Association (October 18-20)
Marriott Desert Springs Resort and Spa, Desert Springs, CA. Main networking and educational event for the power transmission industry. Wo... Read More International Joint Tribological Conference (October 22-24)
Marriott Mission Valley, San Diego, CA. Focuses on research in the multidisciplinary field of tribology. Sponsored by The Society of Trib... Read More 17th Annual Shot Peening and Blast Cleaning Workshop and Tradeshow (October 25-27)
Fiesta Inn & Resort, Tempe, AZ. This is the world's largest workshop specializing in shot peening and blast cleaning and offers more ... Read More AWEA Wind Energy Fall Symposium (November 1-2)
La Costa Resort & Spa, Carlsbad, CA. The American Wind Energy Association (AWEA) sponsors this unique program designed for wind... Read More Wind Power Shanghai 2007 (Oct. 31-Nov. 3)
Sheraton Grand Tai Ping Yang Hotel, Shanghai, China. Turbine manufacturers and component suppliers can attend lectures by senior internat... Read More Gearbox CSI: Forensic Analysis of Gear & Bearing Failures--Useful Tools for Optimizing Gearbox Design (November 7-9)
Sheraton Sand Key Resort, Clearwater Beach, FL. Instructors Joseph Lenski and Ray Drago promise to educate designers on the limitations a... Read More FABTECH International & AWS Welding Show 2007 (November 11-14)
McCormick Place, Chicago, IL. FABTECH International & AWS Welding Show is the largest event in North America dedicated to showcasing a fu... Read More Korean Technology Transfer Seminar (November 16)
Seoul Venture Town, Korea. This seminar focuses on perpindicular gearbox modeling. Other topics include gearbox design and analysis, NVH,... Read More Gear Finishing Technology Seminar (November 21-22)
Aachen, at the Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University, Aachen, Germany.The seminar is fo... Read More Gear Manufacturing Technology Course (December 3-5)
R.P. Machine Enterprises, Statesville, NC. Perry Technology Co., New Hartford, CT. Instructors Geoff Ashcroft and Ron Greene aim to teach... Read More Human Error Prevention (December 4-5, 2007)
“Human Error Prevention” Seminar – Dallas / Fort Worth – December 4-5, 2007.
Contact Ben Marguglio at 845-265-0123 or visit www.HighTec... Read More 2007 International Gear Technology Exhibition China (December 4-7)
Chinese Export Commodities Fair, Pazhou complex Guangzhou, China. Exhibits include standard and special gears, gear production and testin... Read More Problem Reporting, Root Cause Analysis, & Corrective Action (December 6-7)
Learning Outcomes: Upon completion of this seminar, one will be able to:
·Understand problem reporting, root cause analysis and correct... Read More Quality & Environmental Auditing - ISO 19011 (December 10-11)
Learning Outcomes:
. Understand and use quality and environmental audit terminology;
. Establish the audit objectives as "compliance-ba... Read More Korean Technology Transfer Seminar (December 14)
Seoul Venture Town, Korea. This seminar focuses on planetary gearbox analysis. Other topics include gearbox design and analysis, NVH, gea... Read More Tooltech (February 15-18)
Bangalore International Exhibition Center, Bangalore, India. India’s premier exhibition on cutting tools, tooling systems and... Read More AGMA Gear Accuracy Committee (February 20-21)
Orlando, Florida. Members of this committee will gather to discuss topics including the development of AGMA 2002-CXX, tooth thickness spe... Read More Makino’s How to Get the Most Out of Your Work Zone Webinar (February 28)
Makino’s online seminar provides an emphasis on greater productivity and quality by maximizing utilization of the entire work zone ... Read More AGMA Cutting Tools Committee (February 28-29)
The committee will meet to advance their work on AGMA 1104-AXX, a tolerance specification for shaper cutters. They will also determine th... Read More Expo Manufactura Cintermex (March 4-6)
Cintermex, Monterrey, Mexico. Heading into its 14th year, the Expo Manufactura is designed for metalworking and manufacturing professiona... Read More Lean for the Supply Chain (March 12-13)
Crown Plaza Hotel, San Jose, California. An SME event designed to provide manufacturers with a plan to use lean principles and tools to s... Read More WESTEC 2010 (March 23-25)
Los Angeles.Offering education and insight to deal with the tough times endured for the last year in the manufacturing industry, WESTEC 2... Read More Advanced Manufacturing Expo (March 26-27)
International Centre, Toronto, Ontario. Two events form the basis for the Advanced Manufacturing Expo: the Canadian High Technology Show ... Read More WESTEC 2008 Exposition and Conference (March 31 - April 3)
Los Angeles Convention Center, Los Angeles, CA. With a focus not just for technology but for professional advancement, WESTEC offers free... Read More Vacumm Carburizing Seminar at Solar (April 17th)
Solar presents a free seminar on the developments and applications of vacuum carburizing. The event will be held on Thursday, April 17th,... Read More SAE 2008 World Congress (April 14-17)
Geared toward sharpening the skills of budding automotive engineers and training managers, the SAE 2008 World Congress includes 1,500 tec... Read More AWEA Wind Power Supply Chain (April 29-30)
Des Moines Marriott Downtown, Des Moines, IA. Considering the unprecedented growth in wind energy production—45 percent growth in 2... Read More Intertech 2008 (May 5-7)
Contemporary Resort, Walt Disney World, Orlando, FL. Designed to provide a blend of technical and commercial topics, Intertech 2008 hosts... Read More Gear Manufacturing and Inspecition: Methods, Practices, Application and Interpretation for the Design Engineer (May 13-15)
Lago Mar Resort, Ft. Lauderdale, FL. This new gear inspection seminar created by AGMA will be taught by Raymond J. Drago, P.E., chief eng... Read More AME’s Western Regional Lean Conference (June 9-11)
With five inspiring lean speakers, 32 lean practitioner presentations, 18 workshops, 10 lean plant tours with global companies the Asso... Read More World Congress on Powder Metallurgy and Particle Materials (June 8-12)
Gaylord National Hotel, Washington D.C. Held every six years in North America, the 2008 PM World Congress attracts the world’s lead... Read More Basic Gear Noise Short Course, June 10-12, 2009 (June 10-12, 2009)
The Basic Gear Noise Short Course has been offered for more than 30 years and is considered valuable for gear designers and noise special... Read More Canton Industry Week 2008 (June 16-19)
Chinese Export Commodities Fairground Pazhou Complex, Guangzhou, China. Sponsored by the China Council for Promotion of International Tra... Read More SAE International Powertrains, Fuels and Lubricants Congress (June 23–25)
Shanghai Marriott Hongqiao Hotel, Shanghai, China. SAE’s first conference in China will encompass more than 250 new papers about t... Read More SEMICON West (July 15-17)
Moscone Center, San Francisco. “Infinite Innovations, Infinite Ideas” is the slogan for Semicon West, where companies, techno... Read More Furnaces and Atmospheres for Today's Technology Seminar (September 8-10)
Holiday Inn Express, Meadvill, PA. Seco/Warwick organizes this three-day seminar providing heat treating equipment information and best... Read More Canadian Manufacturing Week/Weld Expo Canada (September 23-25)
International Centre, Mississauga, ON, Canada. Design engineering, maintenance products and industrial support services are showcased ... Read More AWEA Wind Resource and Project Energy Assessment Workshop (September 24-25)
Portland Marriott Downtown Waterfront Hotel, Portland, OR. This third installment of the annual American Wind Energy Association&rsquo... Read More TK Solver, Metal Gear Design and Manufacturing Training (September 21-25)
Universal Technical Systems, Inc. offers four days of intensive gear training at their headquarters in Rockford, IL. The course aims to d... Read More "Geometric Dimensioning & Tolerancing" Seminar - Kansas City, MO (September 25-26)
More and more enterprises are adding GD&T requirements to their conventionally toleranced engineering drawings, necessitating training of... Read More QC American New Facility Open House (September 26)
QC American and American Broach and Machine Company have opened a new facility, and they're hosting an open house September 26 from 1... Read More "Geometric Dimensioning & Tolerancing" Seminar - Minneapolis, MN (September 29-30)
More and more enterprises are adding GD&T requirements to their conventionally toleranced engineering drawings, necessitating training of... Read More Making Lean Work for the Job Shop and Small Manufacturer (October 1-2)
Doubletree Hotel Chicago-Oakbrook, Oakbrook, IL. This event sponsored by the Society of Manufacturing Engineers reveals how companies ... Read More Universal Technical Systems Offers TK Solver, Plastic Gear Design and Manufacturing Training (October 12 - 16, 2009)
UTS' four-day gear training, held at UTS Rockford, teaches basic and advanced gear design and theory. An hour of gear consulting with... Read More AME’s International Lean Conference (October 20-24)
Nine inspiring Lean speakers. 70 world-class Lean practitioner presentations. 40 dynamic workshops. 50 Lean plant tours with global com... Read More SME's Lean to Green Manufacturing Event (October 27-29)
More and more manufacturers have realized that "green manufacturing" is critical, is not expensive and can actually help thei... Read More CNC Machining Clinic (November 4-6)
Today, computer numerical control (CNC) machines are found almost everywhere, from small job shops in rural communities to Fortune 500 co... Read More Configuration Technical Seminar (November 11, 2008)
Lancaster Host Conference Center, Lancaster, PA. This seminar, conducted by Misumi USA, is designed to assist engineers to overcome tim... Read More Gearbox CSI: Forensic Analysis of Gear and Bearing Failure (November 12-14)
Sheraton Sand Key Resort, Clearwater, FL. Determining the cause of a failure in a gearbox is a bit of a "who done it" myst... Read More Machine Shop Workshop (November 12-14)
The Doubletree Hotel Chicago-Oak Brook, Oak Brook, IL. Sponsored by American Machinist magazine, the 2008 Machine Shop Workshop is a 2-... Read More AmCon (November 18-19)
November 18-19-AmCon, Greensboro Coliseum, Greensboro, NC. AmCon is a contract manufacturing expo for all job shops and contract manufa... Read More Aerospace Measurment, Inspection and Analysis (November 18-19)
Fort Worth Convention Center, Forth Worth, TX. This two-day event is held alongside Aerotest America, and its focus is the unique qua... Read More AWEA Wind Energy Fall Symposium (November 19-21)
Desert Springs, a JW Marriott Resort and Spa, Palm Desert, CA. The fourth annual AWEA Wind Energy Fall Symposium expects to attract ove... Read More Gear Manufacturing Technology Course (December 8-10)
RP Machine, Statesville, NC. The Gear Consulting Group offers this three-day AGMA course to teach theory and practical aspects of gear ... Read More Introduction to Metallurgical Lab Practices (December 10-12)
ASM International Headquarters, Materials Park, OH. This beginning level course is designed for people with basic or limited familiari... Read More Annual Midwest Region Lean "Open Mic Night" Networking Event (January 20)
Weber Grill Restaurant, 2331 Fountain Square Drive, Lombard, IL. From 5:15 p.m. to 8:30 p.m., lean practitioners share their lean success... Read More Lean Purchasing Workshop (January 22-23)
Sheraton/Cleveland Airport, Cleveland, OH. Business executives who are questioning what's causing their purchasing costs to spike may... Read More Human Error Prevention Seminar (February 3-4)
Holiday Inn Select Airport South, College Park, GA. In addition to discovery and invention, human error prevention can be the greatest c... Read More "Root Cause Analysis" Seminar (February 5-6)
Atlanta. Upon completion of this seminar, one will be able to: • Understand and use problem identification, problem reporting, data ... Read More Failure Mode and Effects Analysis (FMEA) (February 9)
Decatur Conference Center & Hotel, U.S. Highway 36, Decatur, IL. Learn to maximize the benefits of performing FMEA activities, elimi... Read More "Quality & Environmental Auditing - ISO 19011" Seminar (February 9-10)
Atlanta. Upon completion of this seminar, one will be able to: • Understand and use quality and environmental audit terminology; &bu... Read More Quality and Environmental Auditing--ISO 19011 Seminar (February 9-10)
Holiday Inn Select Airport South, College Park, GA. Upon completion of this Atlanta-area seminar, one will be able to: Understand an... Read More Pacific Design and Manufacturing Show (February 10-12)
Anaheim Convention Center, Anaheim, CA. This show is co-located with Automation Technology Expo (ATX) West, WestPack, MD&M West, El... Read More "Measuring Organizational / Process Performance" Seminar (February 12-13)
Atlanta. Upon completion of this seminar participants will be able to understand in detail how to: · Identify metrics to support o... Read More Expo Manufactura (February 17-19)
Cintermex, Monterrey, Mexico. This international manufacturing trade show is Mexico's rendition of IMTS in its 14th installment. T... Read More Photovoltaic Conference and Expo (February 23-25)
Austin Convention Center. Austin, TX. Co-located with the Renewable Energy World Conference & Expo North America, Photovoltai... Read More Houstex 2009 (February 24-26)
George R. Brown Convention Center, Houston. Organized by the Society of Manufacturing Engineers, this event looks to stimulate ideas, ... Read More Implementing Lean: the Five-Stage Process (February 26)
Join the Society of Manufacturing Engineers (SME) for this web training session designed as an introduction to lean manufacturing. Parti... Read More PIM2009 (March 3-4)
Royal Plaza Hotel, Lake Buena Vista, Orlando, FL. PIM2009 is the international conference on powder injection molding held by the Metal... Read More How are companies dealing with the impact of the credit crunch and what will the industry look like coming out of the recession? (March 12)
Join Plante & Moran and PolymerOhio for this complimentary webinar on Thursday, March 12 from 10:00 a.m. - 11:00 a.m.The current cre... Read More Kanban/Pull System/Inventory Reduction (March 16)
Decatur Conference Center & Hotel, US Highway 36, Decatur, IL. A key component of most lean manufacturing strategies, this one-day Ka... Read More Gear Manufacturing Troubleshooting (March 23-25)
Star-SU, Inc., Hoffman Estates, IL. This training school for gear manufacturing is a basic course offered by the Gear Consulting Group in... Read More Detailed Gear Design: Beyond Simple Service Factors (March 24-27)
Sheraton Premiere at Tysons Corner. Vienna, VA. AGMA and instructor Raymond Drago present this four-day course in the Washington, D.C. me... Read More Westec (March 30-April 2)
Los Angeles Convention Center, Los Angeles. WESTEC 2009 will feature over 260 new products and nearly 500 industry leading exhibitors fr... Read More ISO 9001:2008 Revisions Program (April 20)
Decatur Conference Center and Hotel, US Highway 36, Decatur, IL. This one-day program, sponsored by the Illinois Manufacturers' Assoc... Read More Hannover Messe (April 20-24)
Hannover Fairgrounds, Hannover, Germany. The 2009 Hannover Messe comprises 13 trade shows: INTERKAMA; Factory Automation; Industrial Buil... Read More International Fastener and Precision Formed Parts Manufacturing Exposition and Conference (April 27-30)
I-X Center, Cleveland, OH. This four-day event attracts buyers looking for the latest in equipment, products, systems and services for br... Read More Precision Machining Technology Show (April 28-30)
Greater Columbus Convention Center, Columbus, OH. The Precision Machined Products Association along with Production Machining and Modern ... Read More PMI Spring Short Course (May 4-8)
Porous Materials, Inc. headquarters, Ithaca, NY. Porous Materials, Inc. holds a short course twice a year gathering their experts in po... Read More Value Stream Mapping course (May 7-8)
Doubletree Hotel Dearborn, Dearborn, MI. Value Stream Mapping is a valuable tool that allows you to create a visual representation of a... Read More Gearbox System Design: The Rest of the Story...Everything but the Gears and Bearings (May 12-14)
Omni Fort Worth Hotel, Fort Worth, Texas. In some ways, the design of a gearbox system is much like a Hollywood movie production in tha... Read More EASTEC (May 19-21)
Eastern States Exposition Grounds. West Springfield, MA. More than 440,000 East Coast manufacturers continue to use EASTEC as an opport... Read More Human Error Prevention Seminar (June 9-10)
Albuquerque, NM. This seminar provides the most current developments in human error prevention-a significant contributor to improved prod... Read More Advanced Gear Noise Short Course 2009 (June 15-16 )
This advanced session is an extension of the Basic Gear Noise Short Course. The advanced course will be taught through lectures on select... Read More PowderMet2009 (June 28-July 1)
The Mirage Hotel, Las Vegas, Nevada. The program for the 2009 International Conference on Powder Metallurgy & Particulate Materials (... Read More Gear Manufacturing Troubleshooting (July 8-10)
Liebherr America, Saline, MI. This training school for gear manufacturing is a basic course offered by the Gear Consulting Group in regio... Read More Coordinate Metrology Systems Conference (July 20-24)
Louisville Marriott Downtown, Louisville, KY. The 25th annual CMSC will bring together professional and novice users of portable 3-D coo... Read More Powder Metallurgy Basic Short Course (July 27-29)
Penn Stater Conference Center Hotel, State College, PA. This intensive three-day course is designed for people starting out in the PM fie... Read More Center for Automotive Research Management Briefing Seminars (August 3-7)
Grand Traverse Resort & Spa, Traverse City, Michigan. For more than 40 years, the top leaders in the automotive and related industrie... Read More Gear Manufacturing Troubleshooting (September 7-9)
Anaheim, CA. This training school for gear manufacturing is a basic course offered by the Gear Consulting Group in regional versions thro... Read More Entering the Wind Turbine Gearbox Supply Chain (September 16 2009)
Held at Gear Expo 2009, this seminar is presented by Romax Technology and Garrad Hassan in partnership with AGMA, and it is an opportunit... Read More Gear Expo 2009 (September 15-17)
Indianapolis, IN. For the first time since 1995 the gear industry's premier trade event returns to Indianapolis featuring five pavili... Read More Human Error Prevention Seminar (September 22-23)
Chattanooga, TN.This seminar provides the most current developments in human error prevention-a significant contributor to improved pro... Read More Gear Failure Analysis Seminar (September 28-30)
Big Sky Resort, Big Sky, MT. AGMA’s Technical Academy and Robert Errichello of GEARTECH present students with complete knowledge of... Read More Aero and Defense Test 09/ITEA Annual Symposium (September 29-October 1)
Baltimore Convention Center, Baltimore, MD. This annual event for aerospace and defense R&D, test and evaluation and operational test... Read More Fundamentals of Gear Design (September 30-October 2)
UWM School of Continuing Education, Milwaukee, WI. This beginning knowledge course is presented by Raymond Drago and the University of Wi... Read More Wisconsin Machine Tool Show (October 6-8)
Wisconsin Exposition Center, West Allis, WI. The 11th installment of the biennial Wisconsin Machine Tool Show is the largest show specifi... Read More Canadian Manufacturing Technology Show (October 19–22)
Direct Energy Centre, Toronto, Ontario. The CMTS serves as Canada's main showcase for the latest machine tools, automation technolo... Read More International Lean Conference (October 19-23)
Northern Kentucky Convention Center, Covington, KY. On the southern side of Cincinnati, 2,500 lean practitioners from around the world wi... Read More PM Parts Compacting/Tooling Seminar (October 27-28)
Radisson Hotel Cleveland-Gateway, Cleveland, OH. Participants will learn the basics as well as new and advanced technology in PM compacti... Read More International Conference on Surface Metrology (October 26-28)
To explore surface metrology and its varied applications, Worcester Polytechnic Institute (WPI) is hosting a three-day international conf... Read More Furnaces and Atmospheres for Today's Technology (October 26-29)
Holiday Inn Express, Meadville, PA. This annual event hosted by Seco/Warwick allows industry specialists to present the latest improvemen... Read More Shot Peening/Blast Cleaning Workshop and Trade Show (October 27-29)
Albuquerque Embassy Suites Hotel, Albuquerque, NM. Sponsored by Electronics Inc. of Mishawaka, IN, this annual event identifies a higher ... Read More Materials Science and Technology Conference and Exhibition (October 25–29)
David L. Lawrence Convention Center, Pittsburgh, PA. MS&T ’09 is the premier professional forum addressing structure, propert... Read More AWEA Supply Chain Workshop (November 3-5)
Cobo Center, Detroit, MI. Held in conjunction with the American Wind Energy Association (AWEA) Small and Community Wind Conference and Ex... Read More Renewable Energy Finance Summit (November 9-10)
AED Conference Center, Washington, D.C. Network with the key decision-makers and leading market participants who will make renewa... Read More Gear Manufacturing & Inspection Seminar (November 10-12)
Sheraton Sand Key Resort, Clearwater, FL, 8:00 a.m.-5:00 p.m. The focus of this seminar is methods, practices, application and interpreta... Read More Energy Efficiency Workshop (November 17)
NADCA and CMETT Case Western Reserve University are sponsoring an Energy Efficiency Workshop: Effects of Cap & Trade on Die Cast... Read More AWEA Wind Energy Fall Symposium (November 18-20)
Hilton Bonnet Creek Resort and Spa, Orlando, FL. Wind energy professionals in every area of the industry will meet to learn about the win... Read More Human Error Prevention Seminar (December 1-2)
Henderson, NV. This seminar provides the most current developments in human error prevention-a significant contributor to improved pr... Read More Innovative Automotive Transmissions Symposium and Exhibition (November 30-December 3)
Maritim Hotel Berlin, GermanyThis year's CTI Automotive Transmissions Symposium is focusing on further developmens to increase effici... Read More AGMA Strategic Resources Network/Regional Meeting (December 8-9)
Haas Automation, Inc. headquarters, Oxnard, CA. This event combines a tour of Haas Automation, Inc.’s facility with educational ses... Read More Basic Gear Manufacturing Technology (December 8-10)
Gear Manufacturing, Inc. headquarters, Anaheim, CA. The Gear Consulting Group presents this three-day course to emphasize basic gea... Read More Wall Colmonoy's Brazing School (December 8-10)
Wall Colmonoy Brazing Engineering Center. Cincinnati, OH. This three-day brazing course from Wall Colmonoy Corporation covers brazing des... Read More CAR Breakfast Briefing Series—Picking Up the Pieces: The Forecast for 2010 (December 15)
7:30 - 10:30 a.m. Ann Arbor Marriott Ypsilanti at Eagle Crest. 1275 S. Huron St., Ypsilanti, MI 48197 The industry has emerged from p... Read More Mexico Shot Peening Workshop (January 18-19)
The Electronics Incorporated Education Division is bringing its Shot Peening Workshop back to Monterrey, Mexico. Training is accredited ... Read More PM-10 (January 30)
Sheraton Rajputana Palace Hotel, Jaipur, India. This international conference and exhibition on powder metallurgy in processing of partic... Read More Gear Materials Seminar (February 16-18)
Sheraton Sand Key Resort, Clearwater Beach, FL. This course demonstrates how gear design engineers first approach material selection and ... Read More Shot Peening Workshop Japan (March 9)
Tokyo, Japan. The Shot Peening Workshop - Japan is one day of intensive instruction on all aspects of shot peening. Prod... Read More Eurotrans Production Gear Training (March 8-12)
Namur, Belgium. Eurotrans has developed an extensive modular gear training course covering all aspects from geometry and design over prod... Read More Archive of Past Events |
