Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

January/February 1994

Archive > 1994 > January/February 1994

Download the January/February 1994 Issue in PDF format

Feature Articles

Technical Articles

Grinding Bevel Gears on Cylindrical Gear Grinding Machines
Power train designs which employ gears with cone angles of approximately 2 degrees to 5 degrees have become quite common. It is difficult, if not impossible, to grind these gears on conventional bevel gear grinding machines. Cylindrical gear grinding machines are better suited for this task. This article will provide an overview of this option and briefly introduce four grinding variation possibilities.

Generation of Helical Gears with New Surface Topology by Application of CNC Machines
Analysis of helical involute gears by tooth contact analysis shows that such gears are very sensitive to angular misalignment leading to edge contact and the potential for high vibration. A new topology of tooth surfaces of helical gears that enables a favorable bearing contact and a reduced level of vibration is described. Methods for grinding helical gears with the new topology are proposed. A TCA program simulating the meshing and contact of helical gears with the new topology has been developed. Numerical examples that illustrate the proposed ideas are discussed.

The Gear Hobbing Process
Gear hobbing is a generating process. The term generating refers to the fact that the gear tooth form cut is not the conjugate form of the cutting tool, the hob. During hobbing both the hob and the workpiece rotate in a continuous rotational relationship. During this rotation, the hob is typically fed axially with all the teeth being gradually formed as the tool traverses the work face (see Fig. 1a).

Innovative CNC Gear Shaping
The Shaping Process - A Quick Review of the Working Principle. In the shaping process, cutter and workpiece represent a drive with parallel axes rotating in mesh (generating motion) according to the number of teeth in both cutter and workpiece (Fig. 1), while the cutter reciprocates for the metal removal action (cutting motion).

Departments

Random Thoughts for the New Year... (Publishers Page)
Another year has passed and, because of the short term ups and downs of the economy, it's still hard to judge whether we are in an appreciably different place than we were a year ago. The economy doesn't seem to be worse than it was, but it also doesn't seem to be a whole lot better.

Cutting Worm Gears with Standard Gear Hobs (Q&A)
We make a lot of single-start worm and worm gear sets, and it always seems as though we're buying another special hob. We also do a lot of spur gear cutting, and the spur gear hobs and the worm gear hobs look alike, so we wonder why we cannot use the standard hobs for cutting worm gears too. Can we do this?

Calendar (Events)
Complete calendar for January/February 1994

Cutting Down On Labor Costs (Management Matters)
What can be done about the rising cost of labor? Mr. Robert Reich, U.S. Secretary of Labor, has already indicated the administration's intention of pushing the minimum wage from $4.25 to $4.50 per hour and indexing it for inflation. That means that every jiggle in the inflation chart will push the minimum wage higher.