Dry Machining for Gear Shaping
Economic production is one of the main concerns of any manufacturing facility. In recent years, cost increases and tougher statutory requirements have increasingly made cutting fluids a problematic manufacturing and cost factor in metalworking. Depending on the cutting fluid, production process and supply unit, cutting-fluid costs may account for up to 16% of workpiece cost. In some cases, they exceed tool cost by many times (Ref. 1). The response by manufacturers is to demand techniques for dry machining (Ref. 2).
Systematic Investigations on the Influence of Viscosity Index Improvers on EHL Film Thickness
Mineral-oil-base lubricants show a significant decrease of kinematic viscosity with rising temperature, as exemplified in Figure 1 by lubricants for vehicle gears. An important attribute of lubricants is their viscosity index (VI), according to DIN/ISO 2909 (Ref. 4). Viscosity index is a calculated coefficient, which characterizes the change of viscosity of lubricants as a function of temperature. A high viscosity index represents a low variation of viscosity due to temperature and vice versa. A low viscosity-temperature-dependence is required for lubricants that are operated at significantly varying temperature conditions, such as vehicle engine and gear lubricants in summer and winter time. This way, the oils remain flowing and pumpable at low temperatures on the one hand; and on the other hand, sufficiently thick lubricant films can be formed at higher temperatures for a safe separation of the surfaces.
Properties of Tooth Surfaces due to Gear Honing with Electroplated Tools
In recent years, the demands for load capacity and fatigue life of gears constantly increased while weight and volume had to be reduced. To achieve those aims, most of today's gear wheels are heat treated so tooth surfaces will have high wear resistance. As a consequence of heat treatment, distortion unavoidably occurs. With the high geometrical accuracy and quality required for gears, a hard machining process is needed that generates favorable properties on the tooth surfaces and the near-surface material with high reliability.
Profile Shift in External Parallel Axis Cylindrical Involute Gears
Early in the practice of involute gearing, virtually all gears were made with the teeth in a standard relationship to the reference pitch circle. This has the advantages that any two gears of the same pitch, helix angle and pressure angle can operate together, and that geometry calculations are relatively simple. It was soon realized, though, that there are greater advantages to be gained by modifying the relationship of the teeth to the reference pitch circle. The modifications are called profile shift.
Who Makes the Nails (Publishers Page)
I've been thinking a lot about the importance of manufacturing over the last couple of years, especially as I've watched more and more of it leave our country. We work in an industry that is both economically and strategically vital, but I'm concerned that most Americans do not realize the importance of manufacturing, or what will happen if it continues to dissipate.
Product News (Product News)
Complete Product News for November/December 2001.
Welcome to Revolutions, the column that brings you the latest, most up-to-date and easy-to-read information about the people and technology of the gear industry.
Technical Calendar (Events)
Complete Technical Calendar for November/December 2001.
Industry News (Industry News)
Compete Industry News for November/December 2001.
...and visions of wormwheels danced in their heads (Addendum)
Does anyone know where we can find a gear-shaped fruitcake? It's the holiday season again, and the Addendum staff has many friends. We'd like to get each of them the perfect holiday gift, something the demonstrates thought, caring and good will. Of course, we're looking for gifts with meaning, and for us, that can only mean gears.