Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

ASM - Search Results

Related Buyers Guide Categories

Plasma Carburizing

Related Companies

ASM International

Articles About ASM


1 ASM Bringing the Heat to Gear Expo (July 2009)

Gear making and heat treating pair together like a fine cabernet and filet mignon. Now for the first time, the two industries are embracing this symbiotic relationship by co-locating their industry events this fall in Indianapolis. ASM International’s 2009 Heat Treating Society Conference and Exposition and Gear Technology’s favorite trade show, Gear Expo, are teaming up September 14–17 at the Indiana Convention Center in Indianapolis.

2 ASM Heat Treating Show (October 2011)

Map and listings to the ASM Heat Treating Society Conference and Exposition, which is co-located with this year's Gear Expo.

3 ASM Booth Previews (October 2011)

Here are some of the new products and technologies available to attendees at Heat Treat 2011.

4 Heat Treat 2013 Map and Listings (September 2013)

Your guide to the booths at ASM's Heat Treat 2013 show.

5 New Technology Roll Call (September 2013)

Interviews with exhibitors at ASM's Heat Treat 2013 exposition, which is co-located with Gear Expo.

6 Showstoppers (September 2013)

Our special advertising section featuring exhibitors from Gear Expo and ASM Heat Treat 2013

7 Heat Treat Society (September 2011)

Co-located ASM and AGMA shows are a hot ticket.

8 PPD Wear Protection Treatment for Large Parts Opens New Horizons (March/April 2014)

Environmentally friendly, highly efficient and lasting a product's lifetime. With characteristics like this, Pulsed-Plasma Diffusion (PPD) technology from Oerlikon Balzers has established itself as an industry standard for the treatment of large automotive press tooling. Now the technology specialists are targeting new applications with this advanced process, offering an alternative to traditional hard-chrome processes.

9 Industry News (September/October 2014)

The complete Industry News section from the September / October 2014 issue of Gear Technology.

10 Heat Treat Suppliers Focused on Gears (August 2013)

Heat treat suppliers look to the gear industry and the upcoming combined Gear Expo/Heat Treat 2013 for new business.

11 Wear Resistance of Plasma and Pulse Plasma Nitrided Gears (March/April 2003)

In this study, wear behavior of plasma and pulse plasma nitrided gears, made from 42CrMo4 steel, was evaluated under a lubricated sliding and pitting regime.

12 Geoffrey Parrish, Carburizing: Microstructures and Properties, 2nd ed., ASM, 1999, 247 pages. (May/June 2000)

Geoffrey Parrish has updated and expanded his previous book: The Influence of Microstructure on the Properties of Case-Carburized Components. It now contains at least twice the material. References and bibliography include 449 citations.

13 Gear Expo 2011 - Tempered Enthusiasm (November/December 2011)

I came back from Gear Expo in a pretty good mood, and judging by the smiles on the faces of exhibitors I saw, I'm not alone. In fact, the mood at Gear Expo 2011 was the best I've seen in recent memory.

14 Rebuilding a Metrology Infrastructure (January/February 1996)

The American Society of Mechanical Engineers (ASME) announced at Gear Expo '95 that a national service for the calibration of involute artifacts is now available at the Department of Energy's Y-12 Plant in Oak Ridge, TN.

15 Technical Calendar (May/June 1989)

May 18-21. AGMA Annual Meeting, "The Changing World of Gears." Loews Ventana Canyon Resort, Tucson, AZ. July 12-14, 1989. ASM international Conference on Carburizing. Sheraton Hotel & Conference Center, Lakewood, CO. September 12-20, 1989. European Machine Tool Show, Hannover, West Germany.

16 Technical Calendar (November/December 1987)

Gear-related events from SME, ASME and overseas organizers.

17 Technical Calendar (January/February 1989)

March 19-22, 1989. First International Applied Mechanical Systems Design Conference. Convention Center, Nashville, TN. April 25-27, 1989. ASME 5th Annual Power Transmission & Gearing Conference, Chicago, IL

18 Engineered Gear Steels: A Review (November/December 2002)

The selection of the proper steel for a given gear application is dependent on many factors. This paper discusses the many aspects related to material, design, manufacture, and application variables. The results of several studies on the optimization of alloy design for gas- and plasma- carburization processing and reviewed.

19 Custom Gear Cycle Times Plummet with Help from Reishauer, Siemens (September/October 2009)

Custom Gear and Machine, Inc., of Roscoe, IL, recently purchased a Reishauer RZ400 gear grinder and, on one job, has seen the cycle time drop from 40 minutes to six minutes, according to Tim Rose, vice president of manufacturing, who runs the business with co-owners Dave Patterson and Mike Rasmann.

20 A Pause That Refreshes (November/December 2000)

When you to to IMTS, you expect to see hoopla. The mass of machines and bodies gathered in one place should create an unmistakable level of energy and enthusiasm. IMTS 2000 seemed uncharacteristically quiet...

News Items About ASM

1 Solar Donates Vacuum Furnace to ASM (March 26, 2013)
In commemoration of ASM International’s 100th anniversary, Solar Atmospheres Inc. is donating a vacuum furnace to ASM for use in it... Read News

2 Kapelevich to Present ASME Workshop (July 11, 2013)
The ASME 2013 Power Transmission and Gearing Conference is an integral part of the ASME International Design Engineering Technical Confer... Read News

3 ASM Repositions Brand and Introduces New Logo (April 22, 2014)
ASM International (ASM), the world’s largest association of metals-focused materials professionals, recently unveiled a repositioned brand and new logo... Read News

4 ASM Trustee Visits Local Chapters (February 22, 2012)
Bob Hill, president of Solar Atmospheres of Western Pennsylvania, will continue his term as a trustee on the ASM International's Boar... Read News

5 Roger Jones Named President of ASM Heat Treating Society (September 30, 2013)
Roger A. Jones, corporate president of Solar Atmospheres, has been named president of the ASM Heat Treating Society (HTS) for the 2013-20... Read News

6 Solar and ASM Offer Vacuum Heat Treating Course (February 5, 2014)
Solar Atmospheres and ASM International at Materials Park in Ohio have partnered to offer a new Vacuum Heat Treating Course.This new cour... Read News

7 Ipsen Recaps Successful ASM Heat Treat Show (September 26, 2013)
The 27th ASM Heat Treating Conference and Exposition attendees were clear for takeoff at booth #1529. Ipsen offered... Read News

8 ASM Heat Treat Preview: Inductoheat Booth 1611 (September 28, 2011)
Inductoheat provides quality induction heating and heat treating equipment with flexible and innovative systems that offer long-life perf... Read News

9 ASM Heat Treat Preview: Metallurgical High Vacuum Booth 1639 (September 12, 2013)
The HS430 Survivor pumps incorporate multiple oil filters that extend the life of the pump by removing particles and acid which are har... Read News

10 Seco-Warwick Offers Nitrion Plasma Nitriding to South America (May 8, 2014)
Nitrion Technology and Seco/Warwick do Brasil have signed a cooperation agreement to manufacture and market cold wall plasma nitriding equipment in South America... Read News

11 Solar Presents Furnace to ASM Teaching Facility (July 29, 2013)
On Saturday, July 20, a new vacuum furnace, donated by the Solar Atmospheres, Inc. companies, was dedicated in an official ribbon-cutting... Read News