Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

trends - Search Results

Articles About trends


1 State of the Gear Industry 2010 (November/December 2010)

Results of Gear Technology research on trends in employment, outsourcing, machine tool investment and other gear industry business practices.

2 Cleaner, More Energy Efficient: Trends in the Heat Treat Industry (March/April 2002)

an advancing technology and higher energy costs appear to be leading heat-treating companies in the gear industry toward cleaner, more energy-efficient processes. These processes may offer some relief to heat treaters through cooler factories and some relief to their companies through reduced energy usage.

3 Wear Protection for Gears (March/April 1996)

Several trends in mechanical engineering are leading to greater surface stress on components and thus to unacceptable wear. These trends include greater stresses due to increased power densities; the need to maintain high precision of components throughout their service life; and the environmental imperative to reduce use of lubricants and additives.

4 Positive Trends, Hot Products, Minor Quibbles and Other Notes From Gear Expo 97 (January/February 1998)

Notes from Detroit...Overall, Gear Expo 97, the AGMA biennial trade show, was a success. While attendance may not have been what some people had hoped for, the quality of the attendees was high. Serious buyers came and brought their checkbooks.

5 Trends in Automobile Transmissions (July/August 2006)

With all the work in transmission development these days, the demand for automobile transmission gears should remain strong for several years, but suppliers will have to be as flexible as possible to keep up with the changes.

6 Comparison of Rating Trends in AGMA Versus ISO (May/June 2004)

As the international business community grows closer together, the need for understanding differences between national and international gear rating standards becomes increasingly important for U.S. gear manufacturers competing in the world market.

7 Dry Hobbing Proess Technology Road Map (March/April 2001)

Recent trends in gear cutting technology have left process engineers searching for direction about which combination of cutting tool material, coating, and process technology will afford the best quality at the lowest total cost. Applying the new technologies can have associated risks that may override the potential cost savings. The many interrelated variables to be considered and evaluated tend to cloud the issue and make hobbing process development more difficult.

8 Parallel Axis Gear Grinding: Theory & Application (November/December 2000)

The goal of gear drive design is to transit power and motion with constant angular velocity. Current trends in gear drive design require greater load carrying capacity and increased service life in smaller, quieter, more efficient gearboxes. Generally, these goals are met by specifying more accurate gears. This, combined with the availability of user-friendly CNC gear grinding equipment, has increased the use of ground gears.

9 Boom or Bust - Are You in the Right Markets (June/July 2013)

Over the past few months we've talked with a lot of gear manufacturers. Many of them tell us business is strong, while others are struggling with reduced demand. The difference between them isn't so much in the quality of their manufacturing operations, but rather trends in the end markets they serve.

10 2013 State of the Gear Industry (November/December 2013)

Gear Technology’s annual State-of- the-Gear-Industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry. As in years past, the survey was conducted anonymously, with invitations sent by e-mail to gear manufacturing companies around the world.

11 Old World Expertise (November/December 2000)

Dear Editor, I am writing this in response to some articles appearing in your journal, but I want to take the opportunity, also, to express my thanks for all the good work your publication is doing. I always look forward to your next issue being in my mail slot. I know I will find timely technical articles relevant to our manufacturing situation here at Amarillo Gear Co., as well as thought provoking commentary on events and trends affecting our business. The Publisher's Page is always worth the reading.

12 Heat Treat 2013 (March/April 2013)

An overview of the latest technology and trends in heat treating.

13 2012 State of the Gear Industry (November/December 2012)

Gear Technology’s annual state-of-the-gear-industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry. As in years past, the survey was conducted anonymously, with invitations sent by e-mail to gear manufacturing companies around the world.

14 IPTEX 2012 Preview (November/December 2011)

India is rapidly turning into a global manufacturing hub, thanks to the country’s manufacturing and engineering capabilities, vast pool of skilled expertise and its size. These qualities offer it a strategic advantage for the manufacturing segment. A large number of international companies in varied segments have already set up a manufacturing base in India and others are following suit. It only makes sense to bring this industry segment together under one roof to discuss the current trends and technology prevalent to the marketplace. IPTEX 2012 is scheduled from February 9–11, 2012 at the Bombay Exhibition Center in Mumbai, India.

15 High Power Transmission with Case-hardened Gears and Internal Power Branching (January/February 1985)

In the field of large power transmission gear units for heavy machine industry, the following two development trends have been highly influential: use of case hardened gears and a branching of the power flow through two or more ways.

16 State of the Gear Industry 2008 (November/December 2008)

Results of research on trends in employment, outsourcing, machine tool investment and other gear industry business practices.

17 State of the Gear Industry 2007 (November/December 2007)

Results of research on trends in employment, outsourcing, machine tool investment and other gear industry business practices.

18 Opportunities for Gear Grinders - Insights from the Machinery Front (July/August 2005)

Tom Lang of Kapp Technologies shares his views on the trends affecting ground gears.

19 Invest in the Future--Now! (September/October 1987)

It is with great anticipation that we move closer to AGMA's Fall Technical Conference and Gear Expo '87, which is being held on Oct. 4-6 in Cincinnati, OH. This bold undertaking by both AGMA and the exhibitors in the Expo's 160 booths is an attempt to make a major change in the industry's approach to the exposition of gear manufacturing equipment. By combining the Expo with the Fall Technical Conference, those involved in gear manufacturing will have the opportunity to review the latest equipment, trends, and most innovative ideas, while keeping up with the newest technology in the industry.

20 A Hidden Treasure (March/April 1992)

At the next meeting of your association's marketing committee, notice what happens. The rate of taking notes increases dramatically when the market analysis and international trade trends reports begin. Even with the handouts to match the overhead projections of numbers, the audience's pace is furious. This is vital, apparently hard-to-come-by information, and no one wants to miss out. Almost all of the information comes from one source, yet the data offered is only one small dip from an enormous treasure chest - the U.S. Government.

News Items About trends

1 Alpha Gear?s New Gearhead Follows Trends in High Reduction Torque and Ratios (April 11, 2006)
The new SPK+ right-angle gearhead is designed for applications with high reduction ratios and torques. This product combines features ... Read News