Gear Manufacturing Technology Update       June 23, 2015
Gear Expo Puts It All Together – REGISTER NOW!

Gear Expo Puts It All Together – REGISTER NOW!

GEAR EXPO brings you the full range of drive technology expertise —design, manufacturing, application engineering — together in one event. From a single gear to complex drives, GEAR EXPO covers it all … More Exhibitors … More Education Sessions … More Solutions … More Attendees —automotive, construction, mining, agriculture … October 20-22 at Detroit’s Cobo Center.


Read More
Gear Nitriding in Vacuum

Gear Nitriding in Vacuum

Vacuum gas nitride processing from Solar Atmospheres can significantly increase the fatigue strength and service life of your parts. Benefits include case depths up to 0.025” and improved wear and anti-galling properties due to a 40 - 70% increase in surface hardness. Corrosion resistance is increased through nitrogen-enrichment.


Read More
Applied Process Inc. makes bigger parts, better.

Applied Process Inc. makes bigger parts, better.

Only Applied Process has the furnace - and the finesse - to produce austempered iron and steel parts that weigh in excess of 10 tons. Parts that are stronger, lighter, quieter, more wear resistant. Parts that contribute to more energy efficient operations in countless applications and increase performance while decreasing overall cost of production. Visit us online at http://www.appliedprocess.com.


Read More
 
Samputensili G250

Samputensili G250

Star SU presents Samputensili's G250 vertical grinding machine has been developed for very low cycle times and top-quality and efficient mass production of gears with outside diameters up to 250 mm and shafts with lengths up to 550 mm.


Read More
GS Series High Speed Gear-boxes

GS Series High Speed Gear-boxes

Main Performance Parameters:
  • Power P=200 ~ 50000 kW
  • High speed shaft speed n=1000 ~ 20000 r/min
  • Gear pitch circle line velocity v=25 ~ 180 m/s
  • Nominal transmission ratio i=1.0 ~ 8.0
  • Operating temperature T=-40 ~ 45°
  • Gears precision 5 ~ 6 GB/T10095 (AGMA 12 ~ 11)
  • Forward/reverse operation


Read More
GearScan 500 and EasyGear make inspecting the gears a comfortable job

GearScan 500 and EasyGear make inspecting the gears a comfortable job

Stresstech Group’s new GearScan 500 makes testing of the grinding quality in the spur and helical gears accurate and easy. A measurement program is first created with special EasyGear software, after which the Barkhausen noise measurements are made with GearScan 500.


Read More
 
People and Technology Make the Difference

People and Technology Make the Difference

At Presrite, our experience, innovation and expertise ensure that you get the best net and near-net forgings. Our new Tech Center has state-of-the-art design, engineering technology and die making capabilities. Presrite's quality programs include 6 Sigma and ISO 9001:2008...


Read More
DT-1 Drill/Tap Center from Haas Allows Rigid Tapping to 5,000 RPM

DT-1 Drill/Tap Center from Haas Allows Rigid Tapping to 5,000 RPM

The DT-1 Drill/Tap center from Haas Automation, Inc., is now available with a 20,000-rpm inline direct-drive spindle, giving customers the ability to run higher feedrates for small tools and high-speed machining operations.

Read More

Sumitomo Releases New Turning Grades for Machining Stainless Steels

Sumitomo Releases New Turning Grades for Machining Stainless Steels

The AC6030M and AC6040M grades feature Sumitomo’s new AbsotechTM grade coating. Absotech coating improves wear resistance, adhesion resistance, and fracture resistance which extends tool life.

Read More

 

To advertise in Gear Technology's Product Alerts, please call Dave Friedman at (847) 437-6604 or visit our Advertising Section.

The Gear Technology Product Alert is delivered twice per month via e-mail. You can sign up for a free subscription.

Gear Technology® and the Gear Technology e-mail newsletter and Product Alert are
© Randall Publications LLC, 1840 Jarvis Ave., Elk Grove Village, IL 60007 USA
Visit us at https://www.geartechnology.com

marker2