Gear Industry Events 2005

| 2020 | 2019

Smart Solutions for Metal Cutting Conference.
Dorint Sofitel Quellenhof, Aachen, Germany. Held in both German and English, this conference will focus on the most recent developments i... (February 2-3)


Expo Manufactura
Cintermaz Expo Center, Monterrey, Mexico. Mexico's largest machine tool and metalworking exposition. Sponsored by the AMT, registrati... (February 22-24)


National Manufacturing Week
McCormick Place, Chicago, IL. Broken into ten segments: Aluminum, CleanTech, Design Engineering, Enterprise IT, EnviroTech, Industrial A... (March 7 -10)


AGMA’s 89th Annual Meeting
Marco Island Marriott Resort, Marco Island, FL. Guest speakers include Terrell Hansen of The Boeing Corp., Dr. Tom Duesterberg of The Man... (March 10-12)


International Exposition for Power Transmission
North America's largest international exposition developed for hydraulic, pneumatic, electrical and mechanical power transmission com... (March 15-19)


International Fluid Power Expo
Las Vegas Convention Center, Las Vegas, NV. Devoted entirely to power transmission and motion control. Advance attendee exhibit-only regi... (March 15-19,)


Metalform ’05
Donald Stevens Convention Center, Rosemont, IL. North American premier fabricating and forming expo and conference sponsored by the Preci... (March 20-23)


WESTEC Advanced Productivity Exposition
North America’s largest metalforming and manufacturing exhibition. The WESTEC 2005 Conference is held alongside the event. Pavillion... (April 4-7)


Industrial Heat Treating Equipment Association Annual Meeting
J.W. Marriott Starr Pass Resort & Spa, Tuscon, AZ. On this year’s agenda are various committee meetings, seminars on Internet busine... (April 13-16)


Plastic Gear Technology Seminar
Universal Technical Systems facility, Rockford, IL. An introductory course in plastic gearing. Attendees will discuss case studies involv... (April 26-27)


The Fundamentals of Parallel Axis Gear Manufacturing
Pheasant Run Hotel & Conference Center, St. Charles, IL. Seminar includes computer-based visual aids, text and interactive presentations ... (May 24-26)


EASTEC 2005 Advanced Productivity Exposition
Eastern State Expo Center, West Springfield, MA. The only regional event bringing together buyers and sellers of machine tools and metalw... (May 24-26)


Decision Tools for a Lean Manufacturing Environment.
TechSolve facility, Dayton, OH. Concentrates of the collection of machining data and utilizing it to make lean machining decisions, commu... (May 24-26)


KISSsoft Calculation Programs.
KISSsoft facility, Zurich, Switzerland. The first day is an overview of KISSsoft and shaft/bearing calculation methods. June 7?8 are dedi... (June 6-8)


2005 Automotive Parts Product Solution Fair
Tokyo International Exhibition Center, Tokyo, Japan. Sponsored by the Nikkan Kogyo Shimbun Ltd. (The Business & Technology News) with the... (June 15-18)


New Concepts in Gear Design
Webseminar from Omnexus. Focuses on New Concepts in Gear Design: Innovative Materials for Extending Gear Design Possibilities. The course... (June 29, 2005)


Machine Components 2005
The 2005 International Gear Technology Exhibition for China and the 2005 International Fastener Technology Exhibit for China. (June 7-10, 2005)


9th International Conference on Shot Peening
UMLV, Copernic Building, Paris, France. Focuses on shot peening, deep rolling, laser peening, ultrasonic peening, combined and cold work ... (September 6-9, 2005)


44th Waterjet Cutting Technologies Course
Richel Inc.corporate office, Kent, OH. Aimed at all waterjet operators and owners as well as anyone looking to buy or install a system bu... (September 13-15, 2005)


Advances in P/M Gear Technology Seminar
Crowne Plaza at Detroit Metro Airport, Romulus, MI. Presents a future outlook for P/M gearing as well as the automotive industry’s c... (September 13-14)


Basic Gear Noise Short Course
Department of Mechanical Engineering at Ohio State University, Columbus, Ohio. Designed for noise specialists and gear designers who enco... (September 13-15)


3rd International Conference on Gears
Munich, Germany. Co-sponsored by the AGMA, ASSIOT, CMES, FVA, JSME, KIVI-NIRIA, UNITRAM and VDMA. (September 14-16, 2005)


ASM Heat Treating Society Conference & Exposition
David L.Lawrence Convention Center, Pittsburgh PA. North America's largest heat treating exposition. This year's technical semina... (September 25-28)


Wisconsin Manufacturing & Tool Expo
Wisconsin State Fair Park, Milwaukee, WI. The 9th bi-annual show is introducing this year plastics manufacturing and production technolog... (September 27-29, 2005)


International Construction and Utility Equipment Expo
Kentucky Fair and Expo Center, Louisville, KY. Sponsored by the Association of Equipment Manufacturers, this interactive expo hopes to re... (September 27-29, 2004)


European Power Transmission Distributors’ Association
Hilton Hotel, Prague, Czech Republic. The theme of this year's meeting is "Meeting New Challenges" and focuses on forming alliances a... (September 28-30)


New Technology Broaching Seminar
Holiday Inn Fairlane-Dearborn, MI. Seminar focuses on the broaching machines and cell integrations, improving part quality characteristic... (October 11)


Mastering Shot Peening & Blast Cleaning
Renaissance Worthington Hotel, Dallas/Fort Worth, TX. Focuses on proper shot peening procedures, products and plotting a saturation curve... (November 1-3)


ASME International Mechanical Engineering Congress and Expo
Walt Disney World Swan & Dolphin Hotel, Orlando, FL. Technical program includes engineering research presentations broken down into 600 s... (November 5-11)


AGMA Gear Basics Course
Contour Hardening Inc., Indianapolis, IN. Designed for machine operators to manufacturing engineers, the course teaches students about tr... (December 5-7)


POWER-GEN International
Sands Expo Center, Las Vegas, NV. The world's largest power generation conference. Technical tours of the APEX Generating Station and... (December 6-8)


Plastic Injection Mold Design Basics
Holiday Inn on the Bay, San Diego, CA. The seminar covers every major component of an injection mold and is designed for tooling engineer... (December 12-14)


Plastics Injection Mold Design Advanced
Holiday Inn on the Bay, San Diego, CA. This course offers a more detailed look at the specific inner workings of an injection mold, stres... (December 15-16)