Gear Industry Events 2007

| 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003

Gearbox CSI
Lake Buena Vista Resort, Buena Vista (Orlando), FL.Forensic analyses of gear and bearing failures demonstrate that only a few of gearbox ... (February 14-16)


Lean IT Workshop with Jean Cunningham
Holiday Inn-Elk Grove, 1000 Busse Road, Elk Grove Village, IL.  If an IT system has a choke hold on the company's lean journe... (February 19-20)


International Conference on Powder Injection Molding of Metals, Ceramics and Carbides
Royal Plaza Hotel, Lake Buena Vista (Orlando), FL. Highlights include presentations on the latest PIM standards and the Global Powder Met... (February 21-23)


HOUSTEX 2007 Exposition & Conference
George R. Brown Convention Center, Houston,TX. HOUSTEX will be co-located with the International Pump Users Symposium presented by the Te... (March 6-8)


UTS Gear Design & Manufacturing.
UTS facility, Rockford, IL. The course aims to provide a fundamenta... (March 6-9)


Expo Manufactura
Cintermex, Monterrey, Mexico. Metalworking and manufacturing event ... (March 13-15)


Spring Furnace Seminar
Holiday Inn Express, Meadville, PA. Topics include improvements in technologies, design and efficiency for heat processing as well as the... (March 12-15)


AGMA/ABMA Annual Meeting
Marco Island Marriott Resort, Marco Island, FL. Discussions include Dr. Mike Bradley's Report on the Economy, American Politics: Loo... (March 15-17)


KISSsoft Software Training
MicroTek Orlando facility, Orlando, FL.Dr. Stefan Beermann, KISSsoft founder and vice president, will be conducting the course. Class siz... (March 21-22)


Makino's 5-Axis Machining Solutions Webinar
Makino’s online seminar introduces advantages of five-axis machining, including how new levels of sustained dynamic accuracy are ac... (March 27)


WESTEC 2007.
Los Angeles Convention Center, Los Angeles, CA. Exhibitors include ... (March 26-29)


2007 Plastics Parts Innovations Conference and New Product Design Competition
Peabody Hotel, Memphis, TN. The SPI Alliance of Plastics Processors (APP) is accepting abstracts or proposals for technical presentations... (April 1-3)


Hannover Messe World Trade Fair for Industrial Technology
Hannover Fairgrounds, Hannover, Germany. The 2007 exhibit program includes Industrial Automation; Motion, Drive & Automation; Digital Fac... (April 16-20, 2007)


3D Scanning: Reverse Engineering, Inspection and Analysis
. Marriott Detroit at the Renaissance Center Hotel, Detroit, MI. Co-located with the Rapid 2007 Conference and Expo. Focuses on short ra... (May 1-2)


RAPID 2007 Conference & Expo
Marriott Renaissance Center, Detroit, MI. RAPID 2007 is North America's largest annual rapid manufacturing conference & exposition. T... (May 1-3)


Interoperability and 3D Collaboration
Marriott Renaissance Center, Detroit, MI. This international conference provides an opportunity for design, engineering, and manufacturin... (May 3, 2007)


Society of Tribologists and Lubrication Annual Meeting & Exposition
Marriott Hotel, Philadelphia, PA. Meeting highlights include 400 technical presentations, 10 one-day education courses ,80 exhibitors d... (May 6-10)


Modern Furnace Brazing
Holiday Inn, Madison Heights, MI. Design, metallurgical and production engineers will learn about such topics as joint selection, interac... (May 9-11)


RoboBusiness 2007
John B. Hynes Veterans Memorial Convention Center, Boston, MA. Covers commercial applications of mobile robotics and intelligence systems... (May 15-16)


PowderMet 2007--International Conference on Powder Metallurgy and Particulate Materials
Colorado Convention Center, Denver, Co. Worldwide event featuring the latest in PM Equipment, powders, products and services. Internation... (May 13-16, 2007)


10th International Metal Finishing News Shot Peening Workshop and Trade show
Hilton Clearwater Beach Resort, Clearwater, FL. Seminar consists of FAA-approved basic, intermediate and advanced courses. Hands-on train... (May 15-17)


Gear Design Seminar--Beyond Simple Service Factors
Lago Mar Resort, Fort Lauderdale, FL.Taught by Ray Drago, Drive System Technology, this course is designed for gear engineers, designers,... (May 16-18)


EASTEC 2007 Expo
Eastern States Exposition Center, West Springfield, MA. Attendees include manufacturers and buyers from the aerospace, defense, medical, ... (May 22-24)


Designing Plastic Parts for the Injection Molding Process
University of Wisconsin-Milwaukee School of Continuing Education, Milwaukee, WI. Participants learn about selecting the appropriate plast... (June 4-5)


2nd WZL Gear Conference in the U.S.
Travis Pointe Country Club, Travis Pointe, MI. This year's gear conference is hosted by the Sigma Pool, a gearing partnership of Lieb... (June 6)


AGMA's Gear Manufacturing Technology Course
Lieberr Gear Technology Center, Saline, MI. Geoff Ashcroft and Ron Green present theory as well as practical aspects of gear manufacturin... (June 11-13)


ECM Seminar for Heat Treating
Plymouth, MI. One-day technical seminar on new technologies for gas quenching and low pressure vacuum carburizing; research and developme... (June 13, 2007)


Automation Technology Expo East
Jacob K. Javits Convention Center, New York, NY. Four shows are co-located within this event: MD&M East--For the medical device and ma... (June 12-14)


GIMT + AMB China 2007
Guangzhou International Convention and Exhibition Center, The GIMT, South China’s leading machine tool exhibition, will be combined ... (June 14-17)


31st Annual Vibration Institute Meeting & Symposium.
Menger Hotel, San Antonio, TX. The four-day course includes a keynote address on annular gas seals and their impact on rotodynamics as we... (June 19-22)


KISSsoft Calculation Program Seminar
KISSsoft facility, Rapperswil, Switzerland. Dr. Kissling, a member of the Swiss Standard Association, will teach a range of subjects incl... (June 25-28)


Powder Metallurgy Basic Short Course
Penn Starter Conference Center Hotel, State College, PA. Highlights include technical sessions discussing designing for PM, how metal pow... (July 16-18)


India Machine Tools Show 2007
Pragati Maidan, New Dehli, India. Exhibitor profiles includeheavy machinery; machine tools; CNC and SPM; hand tools; cutting tools; power... (July 24-27)


9th EASTPO International Machine Tool Fair
Shanghai New International Exhibition Center, Shanghai, China. Exhibits are separated into the following catagories: Machines, Forming Fa... (July 25-28)


Centerless Grinding Technical Seminar
Cinetec Grinding facility, Farmington Hills, MI. Topics to be covered include principles of machine setup, generating part geometry, regu... (August 14)


Gear Manufacturing Technology Seminars
Lyon Oaks Golf Course Club House. Wixom, MI. Hosted by Mitsubishi Heavy Industries America Inc. Program includes seminars covering gear b... (August 21, 2007)


Korean Technology Transfer Seminar
Seoul Venture Town, Korea. This seminar focuses on planetary gearbox modeling. Other topics include gearbox design and analysis, NVH, gea... (August 24)


10th International Power Transmission and Gearing Conference
Rio All-Suite Hotel, Las Vegas, NV. This conference program is separated into 10 areas including gear design and analysis; gear strength ... (September 4-7)


Romax Technology USA Users Conference
Detroit, MI. Presentations include various transmission engineering topics such as bearings, gearing, NVH, advanced transmission concepts... (September 10-12)


Basic Gear Noise Short Course
Department of Mechanical Engineering, Ohio State University, Columbus, OH. Offered for gear designers and noise specialists who encounter... (September 12-14)


AGMA Training School for Gear Manufacturing
Richard J. Daley College, Chicago, IL. The basic course offers classroom and hands-on training in gearing and nomenclature; principles of... (September 10-14)


Korean Technology Transfer Seminar.
Seoul Venture Town, Korea. This seminar focuses on planetary gearbox analysis. Other topics include gearbox design and analysis, NVH, gea... (September 14)


Advanced Gear Noise Short Course
Department of Mechanical Engineering at Ohio State University, Columbus, OH. This advanced session is an extension of the Basic Gear Nois... (September 17-18)


ASME Bronze Level Lean Certification Review and Exam
Atlanta, GA. The Association for Manufacturing Excellence sponsored Bronze-level exam is the first step in the process and the seminar in... (September 18-19)


ASME Heat Treating Society Conference and Expo
Cobo Center, Detroit, MI. The conference occurs from September 17-19 and the expo on September 18-19. The technical program is broken int... (September 17-19)


Great Lakes 2007 Expo & Conference
DeVos Place, Grand Rapids, MI. A new exposition and conference showcasing manufacturing innovations and emerging technologies to help adv... (September 18-20)


Basics of Bevel and Hypoid Gears
Zurich, Switzerland. This course is limited to 10 participants and conducted in German. Topics include gear cutting systems, gear geometr... (September 17-20)


EMO Hannover
Hannover Fairgrounds, Hannover, Germany. Featuring products and services for metalworking technology, with special emphasis on machine t... (September 17-22)


Romax Technology European Users Conference
Cologne, Germany. Detroit, MI. Presentations include various transmission engineering topics such as bearings, gearing, NVH, advanced tra... (September 25-26)


Assembly Tech Expo
Donald E. Stephens Convention Center, Rosemont, IL. Co-located with Quality Expo and National Manufacturing Week. For registration inform... (September 25-27)


KIMoS Basics
Zurich, Switzerland. This course is limited to 8 participants. Topics include:Repetition of basic theory and spiral bevel gearsKIMoS modu... (September 24-27)


Makino’s Tool and Die Expo
Makino Technology Center, Auburn Hills, MI. Tool, die and mold makers have the opportunity to listen to keynote speakers address customer... (September 25-27)


ISAAT at SME International Grinding Conference
Hyatt Regency Hotel, Dearborn, MI. ISAAT2007 (International Symposium on Advanced Abrasive Technology) along with the SME International G... (September 26-28)


Problem Reporting, Root Cause Analysis, & Corrective Action
Learning Outcomes: Upon completion of this seminar, one will be able to: ·Understand problem reporting, root cause analysis and correct... (September 27-28)


Quality & Environmental Auditing - ISO 19011
Learning Outcomes: . Understand and use quality and environmental audit terminology; . Establish the audit objectives as "compliance-ba... (October 1-2)


SOUTH-TEC 2007 Expo & Conference
Charlotte Convention Center, Charlotte, NC. In 2007, SOUTH-TEC also features SME Motorsports Charlotte exhibits, which are geared toward ... (October 2-4)


Gear Expo 2007
Cobo Center, Detroit, MI. "The Worldwide Gear Industry Event". This year's show promises 200 exhibitors with more than 60 g... (October 7-10)


Advanced Techniques for Pore Size Structure, Characterization, Theory and Practice
Porous Materials headquarters, Ithaca, NY. Attendees learn the basics and catch up on advances in porous characterization techniques. Sig... (October 9-11)


PTC Asia 2007
Shanghai New International Expo Center, Shanghai, China. Exhibition for power transmission and control, fluid power (hydraulics and pneum... (October 10-13)


Gear Manufacturing Technology Course
Perry Technology Co., New Hartford, CT. Instructors Geoff Ashcroft and Ron Greene aim to teach participants gear theory as well as practi... (October 15-17)


Power Transmission Distributors’ Association
Marriott Desert Springs Resort and Spa, Desert Springs, CA. Main networking and educational event for the power transmission industry. Wo... (October 18-20)


International Joint Tribological Conference
Marriott Mission Valley, San Diego, CA. Focuses on research in the multidisciplinary field of tribology. Sponsored by The Society of Trib... (October 22-24)


17th Annual Shot Peening and Blast Cleaning Workshop and Tradeshow
Fiesta Inn & Resort, Tempe, AZ. This is the world's largest workshop specializing in shot peening and blast cleaning and offers more ... (October 25-27)


Aluminum Brazing Invitational Seminar
The Sheraton Hotel, Novi, MI.The AFC-Holcroft/ ThermAlliance Aluminum Brazing Invitational Seminar returns in this 14th installment. As i... (October 27-29)


AWEA Wind Energy Fall Symposium
La Costa Resort & Spa, Carlsbad, CA.  The American Wind Energy Association (AWEA) sponsors this unique program designed for wind... (November 1-2)


Wind Power Shanghai 2007
Sheraton Grand Tai Ping Yang Hotel, Shanghai, China. Turbine manufacturers and component suppliers can attend lectures by senior internat... (Oct. 31-Nov. 3)


Gearbox CSI: Forensic Analysis of Gear & Bearing Failures--Useful Tools for Optimizing Gearbox Design
Sheraton Sand Key Resort, Clearwater Beach, FL. Instructors Joseph Lenski and Ray Drago promise to educate designers on the limitations a... (November 7-9)


FABTECH International & AWS Welding Show 2007
McCormick Place, Chicago, IL. FABTECH International & AWS Welding Show is the largest event in North America dedicated to showcasing a fu... (November 11-14)


Korean Technology Transfer Seminar
Seoul Venture Town, Korea. This seminar focuses on perpindicular gearbox modeling. Other topics include gearbox design and analysis, NVH,... (November 16)


Gear Finishing Technology Seminar
Aachen, at the Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University, Aachen, Germany.The seminar is fo... (November 21-22)


Gear Manufacturing Technology Course
R.P. Machine Enterprises, Statesville, NC. Perry Technology Co., New Hartford, CT. Instructors Geoff Ashcroft and Ron Greene aim to teach... (December 3-5)


Human Error Prevention
“Human Error Prevention” Seminar – Dallas / Fort Worth – December 4-5, 2007. Contact Ben Marguglio at 845-265-0123 or visit www.HighTec... (December 4-5, 2007)


2007 International Gear Technology Exhibition China
Chinese Export Commodities Fair, Pazhou complex Guangzhou, China. Exhibits include standard and special gears, gear production and testin... (December 4-7)


Problem Reporting, Root Cause Analysis, & Corrective Action
Learning Outcomes: Upon completion of this seminar, one will be able to: ·Understand problem reporting, root cause analysis and correct... (December 6-7)


Quality & Environmental Auditing - ISO 19011
Learning Outcomes: . Understand and use quality and environmental audit terminology; . Establish the audit objectives as "compliance-ba... (December 10-11)


Korean Technology Transfer Seminar
Seoul Venture Town, Korea. This seminar focuses on planetary gearbox analysis. Other topics include gearbox design and analysis, NVH, gea... (December 14)