Gear Industry Events 2010

| 2020 | 2019

Mexico Shot Peening Workshop
The Electronics Incorporated Education Division is bringing its Shot Peening Workshop back to Monterrey, Mexico. Training is accredited ... (January 18-19)

Sheraton Rajputana Palace Hotel, Jaipur, India. This international conference and exhibition on powder metallurgy in processing of partic... (January 30)

Gear Materials Seminar
Sheraton Sand Key Resort, Clearwater Beach, FL. This course demonstrates how gear design engineers first approach material selection and ... (February 16-18)

Shot Peening Workshop Japan
Tokyo, Japan. The Shot Peening Workshop - Japan is one day of intensive instruction on all aspects of shot peening.  Prod... (March 9)

Eurotrans Production Gear Training
Namur, Belgium. Eurotrans has developed an extensive modular gear training course covering all aspects from geometry and design over prod... (March 8-12)

AWEA Supply Chain Workshop
The Sheraton Greensboro Hotel at Four Seasons. Greensboro, NC. The American Wind Energy Association's supply chain workshop comes to ... (March 17)

Basic Gear Noise Short Course
Gear and Power Transmission Research Laboratory, The Ohio State University. Columbus, OH. Having been offered for over 30 years, the Basi... (March 17-19)

Orange County Convention Center. Orlando, FL. The American Foundry Society (AFS) and the North American Die Casting Association sponsor C... (March 20-23)

Los Angeles Convention Center. The definitive West Coast manufacturing event includes keynote presentations from industry leaders in ae... (March 23-25)

Manufacturing Technology Forum
Gaylord Opryland Resort and Convention Center. Nashville, TN. The Association for Manufacturing Technology (AMT) and the National Center ... (March 30-31)

MIM 2010
Hyatt Regency Long Beach, Long Beach, CA. The International Conference on Injection Molding of Metals, Ceramics and Carbides is sponsored... (March 29-31)

CO2 Machining Technology Webinar
This one hour webinar will introduce the CO2 Machining technology, which is a lean and green manufacturing technology that eliminates air... (April 7, 2010)

Gearbox System Design Seminar
Concordville, Pa. This program will help address what you can do to optimize the gearbox system - from the housings to the lubricati... (April 13-15)

Machine Shop Workshop
Renaissance Hotel in downtown Cleveland, Ohio. This workshop brings together hundreds of shop owners and top managers from U.S. machi... (April 21-22)

Hannover Messe 2010
Hannover Fairgrounds, Hannover, Germany. The world's leading trade show for industrial technology returns in 2010 with the usually f... (April 19-23)

European Wind Energy Conference and Exhibition
(Warsaw, Poland) The European Wind Energy Conference and Exhibition (EWEC) is a professional, comprehensive and informational event for ... (April 20-23)

Exhibition Centre Nuremberg, Germany. This international expo for powder and bulk solids mechanical processing technologies and instrumen... (April 27-29)

Shot Peening Workshop Canada
Toronto, Canada. The Shot Peening Workshop - Canada is two days of intensive instruction on all aspects of shot peening. Product d... (April 28-29)

North American Material Handling and Logistics Show
International Exposition Center, Cleveland, OH. NA2010 will showcase the material handling and logistics solutions of more than 400 co... (April 26-29)

Manufacturing Innovations-Medical U.S.
McCormick Place, Chicago, IL.This event is designed specifically for companies involved in the design and manufacture of Class II and III... (May 4-6,2010)

Contract Manufacturing Purchasing Fair: Re-Shoring to Bring U.S. Manufacturing Jobs Back Home
Hyatt Regency Irvine Hotel, Irvine, CA. The National Tooling and Machining Association (NTMA), the Precision Metalforming Association (PM... (May 12)

Windpower Conference and Exposition
Dallas, TX.Windpower is produced by the American Wind Energy Association (AWEA) and is the premier wind energy event in North America. Ov... (May 23-26)

Eastern States Exposition. West Springfield, MA. East Coast manufacturers gather at Eastec to evaluate new equipment, applications and su... (May 25-27)

CTI Symposium North America
Four Points by Sheraton Ann Arbor Hotel. Ann Arbor, MI. This event, organized by the German Car Training Institute (CTI), focuses on the ... (June 8-9)

Gear Solutions Forum
Gleason-Pfauter, Ludwigsburg, Germany. The latest advances from Gleason are the focus of the Gleason Gear Solutions Forum 2010 where ne... (June 9-11)

Gear Manufacturing Dynamics of Soft and Hard Gear Finishing Seminar
Crowne Plaza, Indianapolis Airoport. Indianapolis, IN.This Gleason seminar is a comprehensive, two-day event. Topics include gear blank t... (June 22-23)

PowderMet 2010
The Westin Diplomat, Hollywood (Ft. Lauderdale), FL. The 2010 International Conference on Powder Metallurgy and Particulate Materials is ... (June 27-30)

Gear Failure Analysis Seminar
Big Sky Resort, Big Sky, MT. AGMA's Gear Failure Analysis Seminar examines various types of gear failure, including macropitting, mic... (June 28-30)

Coordinate Metrology Systems Conference
World-Class Grand Sierra Resort, Reno, NV. The 26th annual Coordinate Metrology Systems Conference (CMSC) is organized by the Coordinate ... (July 12-16)

Basic PM Short Course
Penn Stater Conference Center Hotel, State College, PA. This intensive, three-day course is designed for users of powder metal (PM) parts... (July 26-28)

CAR Management Briefing Seminars
Grand Traverse Resort and Spa. Traverse City, Michigan. The Center for Automotive Research (CAR)'s Management Briefing Seminars is a... (August 2-5)

North American Coordinate Metrology Association Conference
Minneapolis, MN.This workshop is designed for technicians, engineers, scientists, equipment manufacturers and operational managers concer... (August 4-6)

NFPA Industry and Economic Outlook
Westin Chicago North Shore Hotel, Wheeling, IL. AGMA members are invited to join the National Fluid Power Association (NFPA) at the inter... (August 17-18)

Gear Failure Analysis Seminar
Big Sky Resort, Big Sky, MT. AGMA's Gear Failure Analysis Seminar examines various types of gear failure, including macropitting, mic... (September 13-15)

Atlantic Manufacturing Technology Show
Exhibition Park, Halifax, Novia Scotia. Atlantic Manufacturing Technology Show (AMTS) brings manufacturers together to connect on new tec... (September 21-23)

Gear Manufacturing and Inspection Training
Concordville Hotel and Conference Center, Concordville, PA. AGMA and Raymond Drago present this training session on the methods, practic... (September 28-30)

EPTDA Annual Convention
Malta. The European Power Transmission Distributors Association's (EPTDA) 13th Annual Convention is expected to attract over 250 qual... (September 29-October 2)

Furnaces North America
Caribe Royale Hotel and Convention Center, Orlando, FL. FNA will offer two days of networking functions with a business expo featuri... (October 4-6)

North American Offshore Wind Conference and Exhibition
Atlantic City, NJ. The North American Offshore Wind Energy Conference and Exhibition will provide opportunities for networking, lear... (October 5-7)

Basic Training for Gear Manufacturing
Richard J. Daley College, Bldg 300, 7500 S. Pulaski Rd., Chicago. Through classroom and hands-on training from AGMA, attendees learn to s... (October 4-8)

Fundamentals of Rotating Machinery
LMS North America, Troy, MI. More than ever, the engineering of rotating equipment is under pressure to deliver better performance with... (October 13)

PM2010 World Congress and Exhibition
Florence, Italy. PM2010 will offer delegates more than 600 technical papers on PM technology. The Technical  program in conjunction ... (October 10-14)

Lean in a High Mix-Low Volume Environment
Monee, IL. The Association for Manufacturing Excellence (AME) presents a half-day afternoon workshop at Whiting Corporation, where Lean ... (October 14)

Manufacturing Innovations-Aerospace/Defense
Gaylord Palms, Orlando, FL. Manufacturing Innovations - Aerospace/Defense is exclusively designed for aerospace and defense manufacturers... (October 20-21, 2010)

QEH&S Auditing - ISO 19011 Seminar
Courtyard by Marriott, Houston Intercontinental Airport, Houston. Upon completion of this seminar, one will be able to: • Understa... (October 21-22)

2010 USA Shot Peening and Blast Cleaning Workshop
Hyatt Regency St. Louis at the Arch, St. Louis. The Annual Shot Peening and Blast Cleaning Workshop is three days of information on all a... (October 26-28)

Lean to Green Manufacturing
Hyatt Regency Columbus, Columbus, Ohio. The Society of Manufacturing Engineers (SME) is committed to keeping industry practitioners curre... (October 26-29)

Manufacturing Innovations-Medical Canada
International Centre, Hall 6. Toronto, Ontario. Canada boasts a $6 billion medical device manufacturing industry with a 52 percent concen... (November 3-4, 2010)

AME 2010 International Lean Conference
Baltimore Convention Center, Baltimore. The Association for Manufacturing Excellence (AME) has a long track record for finding and convin... (November 15-19)

Innovative Automotive Transmissions and Drivetrains
Berlin, Germany.The International CTI Symposium and its specialist exhibition, Transmission Expo, is a European event for people seeking ... (November 30-December 1)

Wind Power Manufacturing & Supply Chain Summit USA
Chicago. There are strong opportunities in the US wind power manufacturing and supply chain, through the provision of construction, tran... (November 30-December 1)

Defense Manufacturing Conference
The Venetian, Las Vegas. The Defense Manufacturing Conference (DMC) 2010 is the nation's largest forum for scientists, tech... (November 29-December 2)

MDA India 2010
Mumbai, India. MDA is an international trade fair for motion, drives and automation, as well as hydraulics and pneumatics. MDA India is a... (December 15-18)