Gear Industry Events 2011

| 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003

AeroCon
Anaheim, California. This three-day event will examine timely issues within the aerospace and defense industries. It is designed to appea... (February 8-10)


Expo Manufactura
Cintermex, Monterrey, Mexico. The largest event in Mexico for the processing and manufacturing industries boasts more than 350 companies ... (March 1-3)


TIMTOS 2011
Taipei, Taiwan. The 15th Taiwan International Machine Tool Show will be held at the TWTC Taipei World Trade Center (TWTC) Exhibitions Hal... (March 1-6, 2011)


Manufacturing for Growth
Chandler, AZ. Four leading associations of small- and medium-sized manufacturing companies recently announced that they are combining res... (March 3-6)


AGMA Regional School for Gear Manufacturing
Lombard, Illinois. Hosted by Overton Chicago Gear, the AGMA Regional School for Gear Manufacturing returns with a series called, "Lo... (March 7-9)


Gear Dynamics and Gear Noise Course
The Ohio State University. The Gear Dynamics and Gear Noise Short Course has been offered for more than 30 years and is considered extrem... (March 15-18)


Gear Dynamics and Gear Noise Short Course
The Ohio State University. The Gear Dynamics and Gear Noise Short Course has been offered for more than 30 years and is considered extrem... (March 15-18)


2011 Solid State Power Supply Technical Seminar
Madison Heights, Michigan. This class is scheduled to examine the InductoForge System and IHAZ software technology. The pr... (March 23-25)


AeroDef Manufacturing
Anaheim Convention Center, Anaheim, California. AeroDef Manufacturing is designed to meet the manufacturing challenges in the entire aero... (April 5-7)


Hannover Messe
Hannover Fairgrounds, Hannover Germany. The world's leading trade show for industrial technology returns in 2011 with 13 leading trad... (April 4-8)


2011 ABMA/AGMA Annual Meeting
San Antonio, Texas. For the first time the American Bearings Manufacturers Association (ABMA) and the American Gear Manufacturers Associa... (April 14-16)


Pitch-Perfect Threading
Sandvik Coromant Productivity Center, Schaumburg, Illinois. Part of Sandvik Coromant's Smart Event series, dedicated to helping you t... (May 4)


Gears Motors & Controls Expo 2011
Bombay Exhibition Centre, Mumbai, India. GMC 2011 is a showcase of gears, motors, controls and allied products scheduled to be organized ... (May 6-8)


EMAG Technology Days
Farmington Hills, Michigan. EMAG will showcase a variety of presentations and live demonstrations on turning and grinding, heavy-duty mac... (May 10-11)


Detailed Gear Design–Beyond Simple Service Factors
Harrahs Las Vegas. Gear engineers, gear designers, application engineers, and people who are responsible for interpreting gear designs ar... (May 10-12)


2011 Solid State Power Supply Technical Seminar
Madison Heights, Michigan. This class is scheduled to examine Statipower SP16 Power Supply. The principle objective of this sem... (May 11-13)


Fabtech Mexico
Cintermex, Monterrey, Mexico. Co-sponsored by the Fabricators and Manufacturers Association, Int'l (FMA) and the Society of Manufactu... (May 11-13)


Basic Training for Gear Manufacturing
This AGMA training course covers gearing and nomenclature, principles of inspection, gear manufacturing methods, hobbing and shaping. The... (May 16-20)


PowderMet2011.
Marriot Marquis, San Francisco. PowderMet offers exhibitors an opportunity to meet with customers during the course of the three-day conf... (May 18-21)


Windpower Conference and Exhibition
Anaheim, California. Organized by the American Wind Energy Association (AWEA), Windpower brings together thought leaders, industry expert... (May 22-25)


Manufacturing Velocity: SME Annual Conference
Bellevue, Washington. The SME Annual Conference provides insights and connections to accelerate you and your company by discovering the y... (June 5-7)


AGMA Webinar Series: Conditions for Cutting Tools
Live online webinar. The AGMA Webinar Series provides an opportunity to learn from and interact with the experts in the gear industry. Th... (June 15)


2011 Solid State Power Supply Technical Seminar
Madison Heights, Michigan. This class is scheduled to examine Statipower SP12 Power Supply. The principle objective of this sem... (June 22-24)


Basic PM Short Course
Penn Stater Conference Center Hotel, State College, PA. This three-day course is designed for users of powder metal (PM) parts and those ... (July 18-20)


2011 CAR Management Briefing Seminars
Grand Traverse Resort and Spa. Traverse City, Michigan. The Center for Automotive Research (CAR) presents its traditional summer gatherin... (August 1-4)


7th China (Beijing) International Gear Transmission and Equipment Expo
Beijing. With China's gear industry continuing to develop on the global stage, the International Gear Transmission and Equipment Expo... (August 10-12)


Interactive Manufacturing Experience
Las Vegas. With a mission to advance U.S. manufacturing, imX is a collaboration of companies including DMG/Mori Seiki, FANUC, Kennametal,... (September 12-14)


Eleventh International Conference on Shot Peening
The Eleventh International Conference on Shot Peening (ICSP-11) will be held September 12-15, 2011 in South Bend, IN. ICSP-11 is a trienn... (Sept 12-15, 2011)


AWEA Small and Community Wind Conference
Des Moines, Iowa. More than 100 exhibitors will have the latest wind technology to show consumers, renewable energy professionals and ins... (September 15-17)


2011 Solid State Power Supply Technical Seminar
Madison Heights, Michigan. This class is scheduled to examine Statipower SP5 Power Supply. The principle objective of this semi... (September 21-23)


EMO Hannover 2011
Hannover, Germany. Metal working technology specialists will be front and center for six days at EMO Hannover 2011. More than 2,000 compa... (September 19-24)


Basic Training for Gear Manufacturing
Richard J. Daley College, Chicago. This AGMA training course covers gearing and nomenclature, principles of inspection, gear manufacturin... (October 3-7)


Detroit International Advanced Manufacturing Technology Show
Cobo Center, Detroit. The Detroit International Advanced Manufacturing Technology Show (DIAMTS) will focus on OEM auto parts and componen... (October 3-8)


South-Tec 2011
Charlotte, North Carolina. Sponsored by SME, South-Tec offers the latest technologies in precision machine tools, advanced materials and ... (October 11-13)


2011 Solid State Power Supply Technical Seminar
Madison Heights, Michigan. This class is scheduled to examine Statipower SP11 Power Supply. The principle objective of this sem... (October 19-21)


Discover Mazak–Tomorrow's Technology Today
Florence, Kentucky. During Discover Mazak, more than 30 new machines will be featured, as well as a demonstration of Mazak's Producti... (October 17-27)


Gear Expo 2011
Duke Energy Convention Center, Cincinnati, Ohio. The only trade show dedicated to the complete gear manufacturing process, AGMA'... (November 1-3)


AWEA Wind Energy Fall Symposium
La Costa Resort & Spa, Carlsbad, California. This exclusive event sets the stage for sharing successes, strategies, and lessons-learn... (November 2-4)


AmCon Design and Contract Manufacturing Expo
Novi, Michigan. AmCon is a contract manufacturing expo for all job shops and contract manufacturers that provides custom metal, plastic, ... (November 8-9)


Fabtech 2011
McCormick Place, Chicago. North America's largest metal forming, fabricating, welding and finishing event anticipates 30,000 visitors... (November 14-17)


2011 Solid State Power Supply Technical Seminar
Madison Heights, Michigan. This class is scheduled to examine Statipower SP16 Power Supply. The principle objective of this sem... (November 16-18)


Defense Manufacturing Conference
Anaheim, California. The Defense Manufacturing Conference (DMC) 2011 is the nation's largest forum for scientists, technolo... (November 28-December 1)


Gearbox System Design
Sheraton Sand Key Resort, Clearwater, Florida. The design of a gearbox system is much like a Hollywood movie production-the "stars&q... (December 6-8)