Gear Industry Events 2012

| 2020 | 2019

Gearbox CSI: Forensic Analysis of Gear and Bearing Failure
Best Western Concordville Hotel and Conference Center, Concordville, Pennslyvania. Determining the cause of a failure in a gearbox is a ... (Jan. 24-26 )


IPTEX 2012
Bombay Exhibition Center, Mumbai, India. India is rapidly turning into a global manufacturing hub, thanks to the country's manufactur... (February 9-11)


Expo Manufactura
Cintermex, Monterrey, Mexico. The largest event in Mexico for the processing and manufacturing industries boasts more than 600 national a... (March 6-8)


Lean Transformation Summit
Jacksonville, Florida. The Lean Enterprise Institute (LEI) summit raises consciousness, generates enthusiasm and explores new frontiers i... (March 7-8)


The MFG Meeting (Manufacturing For Growth)
Hyatt Regency Grand Cypress, Orlando, Florida. The MFG Meeting brings together a broad spectrum of manufacturing business owners and top ... (March 8-11)


Composites Manufacturing 2012
The Composites Manufacturing conference and exhibition provides knowledge on composite applications, processes and best practices. This t... (March 13-15)


AGG1 Aggregates Forum & Expo
Charlotte Convention Center, Charlotte, NC. AGG1 Aggregates Forum & Expo focuses exclusively on the aggregates industry and features ... (March 13-15)


Gear Dynamics and Gear Noise Short Course 2012
The Ohio State University. The Gear Dynamics and Gear Noise Short Course has been offered for more than 30 years and is considered extrem... (March 13-16)


Voice of the Customer for New Product Development
Frankfort, Illinois. Presented by the Association for Manufacturing Excellence (AME) and hosted by Therafin Corporation, this regional ev... (March 28-29)


NPE 2012
Orange County Convention Center, Orlando. The International Plastics Showcase, NPE offers more than 2,000 plastics suppliers exhibiting o... (April 1-5)


Improving the Life and Performance of Critical Transmissions
University of Huddersfield. This one-day seminar from the Metal Improvement Company, a business unit of Curtiss-Wright Surface Technologi... (April 25)


Hannover Messe 2012
Hannover Fairgrounds, Hannover, Germany. The world's leading trade show for industrial technology returns in 2012 with a full lineup ... (April 23-27)


Mfg4 2012
Hartford, Connecticut. GE Energy, Medtronic, Boeing, Raytheon, Sikorsky and other manufacturing organizations know the best source of inn... (May 8-10)


Analytical Gear Chart Interpretation: Reading Between the Lines (Part 1)
Dwight Smith, president of Cole Mfg. Systems, presents this AGMA Gear Education Webinar Series from 1:00 pm to 2:30 pm Eastern time. The ... (May 10)


Modern Furnace Brazing School
Cincinnati. Preserving the tradition originated by the late Robert Peaslee, a brazing pioneer who invented the first nickel-base brazing ... (May 8-10)


Control 2012
Stuttgart Exhibition Center, Stuttgart, Germany. Control 2012 enters its 26th year with the latest technologies, products, subsystems and... (May 8-11)


Lubrication and Wear: Advanced Concepts
South Bend, Indiana. Attendees will bridge the gap between component design and failure as a result of relative motion between surfaces i... (May 14-16)


MMTS 2012
Montreal, Canada. The Montreal Manufacturing Technology Show (MMTS) is Quebec's definitive manufacturing event. MMTS is the largest a... (May 14-16)


Gear Materials: Selection, Metallurgy, Heat Treatment and Quality Control
Milwaukee. Instructors Raymond Drago and Roy Cunningham of Drive Systems Technology, Inc. help attendees discover how both the gear desig... (May 15-17)


Vacuum Carburizing Symposium 2012
Troy, Michigan. This two-day event will be held at the Michigan State University, Management Education Center and will include round trip... (May 22-23)


Fabrication and Machining and Facilities Expo
Houston, Texas. This two-day exhibition of manufacturing products and services aims to encourage networking and marketing opportunities f... (May 23-24)


Windpower 2012
Georgia World Congress Center, Atlanta. Sponsored by the American Wind Energy Association (AWEA), Windpower 2012 offers various ways to g... (June 3-6)


Hexagon 2012
Las Vegas. This international conference from Hexagon Metrology offers the chance to preview technologies, attend presentations by indust... (June 4-6)


PowderMet2012
Nashville. This 100-booth international marketplace will present more than 80 leading companies featuring the latest PM equipment, powder... (June 10-13)


Gleason Gear Solutions Forum-Systems for Gear Manufacturing
Ludwigsburg, Germany. Machine tools, workholding equipment and new technologies in bevel and cylindrical, small and large, external and i... (June 13-15)


International VDI Congress Drivetrain for Vehicles 2012
Friedrichshafen, Germany. Sustainable driving, lower CO2 consumption, a paradigm shift towards electromobility: the automotive industry h... (June 19-20)


Human Error Prevention Seminar
Holiday Inn Express, Garden Grove, California.  The principles and practices of human error prevention are universally applicable re... (June 19-20)


WZL Gear Conference
Schaumburg, Illinois. For more than 50 years the annual WZL Gear Conference in Aachen, Germany, has been the basis for the exch... (June 20-21)


Root Cause Analysis Seminar
Holiday Inn Express, Garden Grove, California. This seminar covers all of the elements of a problem/condition reporting, root cause analy... (June 21-22)


NLSC 2012
H. Roe Bartle Hall Convention Center, Kansas City. The National Leadership and Skills Conference (NLSC) boasts 16,000  high school a... (June 23-27)


Automation India 2012
Bombay Exhibition Centre, Mumbai. Automation India is one of the most comprehensive automation technology industry related trade shows in... (September 7-10)


International Conference on Manufacturing Research 2012
Aston University. For over two decades it has been the main manufacturing research conference organized in the U.K., successfully bringin... (September 11-13)


HTIFE 2012
Beijing, China. The Heat Treatment and Industrial Furnace Expo (HTIFE) is organized by the Beijing Hiven Exhibition Co., Ltd. With the ra... (August 22-24)


Pune Machine Tools Show 2012
Autocluster Exhibition Centre, Pune. This four-day event is a platform where exhibitors and potential buyers come together to discuss the... (August 23-26)


IANA & IMTS 2012 German Night Reception
McCormick Place, Chicago.The German American Chamber of Commerce of the Midwest, Inc., in cooperation with Hannover Fairs USA, invites yo... (September 11)


IMTS 2012
McCormick Place, Chicago. The 29th edition of the manufacturing technology show boasts more than 1,100 exhibiting companies that will occ... (September 10-15)


HITEX Build 4 India 2012
Hyderabad Exhibition Centre, Hyderabad, India. The third  edition of HITEX Build 4 India aims to bring together all the aspects of t... (September 13-16)


Root Cause Analysis Seminar
Fogelman Executive Conference Center, Memphis, Tennessee. This seminar covers all of the elements of a problem/condition reporting, root ... (September 20-21)


Auditing Management Systems-ISO 19011
Fogelman Executive Conference Center, Memphis, Tennessee. This seminar is designed for auditors-in-training, auditors, audit supervisors ... (September 24-25)


AWEA Offshore Windpower 2012 Conference & Exhibition
Virginia Beach Convention Center, Virginia. Offshore Windpower brings together exhibitors and attendees from all over the world who are i... (October 9-11)


AME Chicago 2012
Sheraton Chicago Hotel and Towers. The Association for Manufacturing Excellence (AME) has a long track record for finding and convincing ... (October 15-19)


Medical Manufacturing Innovations 2012
International Centre, Ontario. In response to the success of MMI 2010, MMI returns in its second year to provide key medical and dental d... (October 24-25)


AGMA Fall Technical Meeting
Hyatt Regency Dearborn, Dearborn, Michigan. The FTM highlights the latest research in the industry from experts all over the world on top... (October 28-30)


AWEA Wind Energy Fall Symposium
Chandler, Arizona. The AWEA Wind Energy Fall Symposium sets the stage for sharing successes, strategies, and lessons-learned with wind en... (November 14-15)


Defense Manufacturing Conference 2012
Orlando, Florida. The Defense Manufacturing Conference (DMC) is the nation's largest forum for scientists, technologists, engineers, ... (November 26-29)


Wind Power India 2012
The Indian Wind Turbine Manufacturers Association (IWTMA), the World Institute of Sustainable Energy (WISE), and the Global Wind Energy C... (November 28-30)


The Grinding Doc's High Intensity Grinding Course
Louisville, Kentucky. Hosted by Atlas Machine, the High Intensity Grinding Course gives attendees the knowledge, tools, resources and the... (November 28-30)


Detailed Gear Design Beyond Simple Service Factors
Crowne Plaza Old Towne Alexandria, Alexandria, Virginia. Raymond Drago, chief engineer-gear technologist, Drive Systems Technology, Inc.,... (December 4-6)


Discover More With Mazak
Houston, Texas. Mazak Corporation is hosting a special “Discover More with Mazak” manufacturing event at its Southwest Techn... (December 5-6)


Gear Design and Theory
Gleason Cutting Tools Gear School, Loves Park, Illinois. This comprehensive three and a half day program is a blend of shop time and cl... (December 9-12)


Gear School Fundamental Gear Course
Loves Park, Illinois. Gleason Cutting Tools offers this parallel axial gear course dealing with fundamentals of gears, gear inspection, u... (December 10-13)