Dillon Manufacturing - Search Results
Articles About Dillon Manufacturing
Articles are sorted by RELEVANCE. Sort by Date.
Gear-related new technology from Helios, Chiron, C-B Gear & Machine, Marposs, Dillon Manufacturing, Schunk, Forest City Gear and more.
The complete Product News section from the September 2013 issue of Gear Technology.
The complete Product News section from the September/October 2019 issue of Gear Technology.
The complete Product News section from the October 2013 issue of Gear Technology.
The complete Product News section from the November/December 2020 issue of Gear Technology.
The Digital Manufacturing Revolution Evolves in 2020
Gleason skiving machines equipped with on-board cutter sharpening; Helios celebrates anniversary of cutter sharpener line; and more product news.
The complete Product News section from the March/April 2019 issue of Gear Technology.
New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.
The latest from Liebherr, Gleason, Klingelnberg and more.
The complete Product News section from the March/April 2015 issue of Gear Technology.
The complete product news section from the September / October 2014 Issue Gear Technology.
The complete Product News section from the January/February 2014 issue of Gear Technology.
Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.
News from around the Gear Industry
In a capitalist society, the way things usually work is that government and academia focus on research and development, while industry focuses on commercialization. The result is an increasingly wide disconnect in the applied research sector, which deals primarily with technology development and demonstration.
News From Around the Gear Industry
Our special advertising section featuring some of the premier gear industry suppliers at IMTS 2016.
Latest News from around the industry
News from around the Gear Industry
Latest new from the Gear Industry
Latest news about the Latest Products
News about New Products
The complete Industry News section from the March/April 2015 issue of Gear Technology.
In this special section, our editors have gathered recent news and information related to the heat treatment of gears. Here youâ€™ll find a comprehensive assortment of news and upcoming events that will help you understand the various heat treatment processes available for gears and choose the best option for your projects, whether you heat treat in-house or send your gears to a commercial heat treating provider.
Gear Technology hosts dinner for technical contributors to the gear industry during this year's AGMA Fall Technical Meeting and Gear Expo in Columbus, OH. Plus other news from around the industry.
The presidents of two manufacturing companies were having a drink in the lobby before the start of their trade association's annual meeting...
The secret to meeting today's inspection demands is influenced by the technology and those in charge of operating it.
As the founder, president and co-host of Manufacturing Talk Radio, as well as publisher of Metals & Manufacturing Outlook eZine, I am excited to report that the economic outlook for 2018 is just too good not to tout. Whatever "final GDP number" the government divines for 2017, the year will finish above 3% for the first time in a decade.
Emerging technologies such as robotics/automation, new materials, additive manufacturing and IIoT can and will change the course of gear manufacturing for the foreseeable future.
Fraunhofer CMI focuses on new U.S. gear and transmission technologies group, plus other news from around the industry.
In helicopter applications, the two-piece gear is typically joined by welding, bolts, or splines. In the case of the U.S. Army CH-47D Chinook helicopter, a decision was made to eliminate these joints through the use of integral design. Integral shaft spiral bevel gears must be designed such that the shaft does not interfere with gear tooth cutting and grinding. This paper discusses techniques to iterate in the design stage before manufacturing begins.
The complete Industry News section from the March/April 2019 issue of Gear Technology.
The complete Industry News section from the August 2014 issue of Gear Technology.
The complete Industry News section from the July 2019 issue of Gear Technology.
Motion + Power Technology Expo VIP Exhibitors special advertising section.
How 3-D printing is changing the powder metal performance game.
The complete Industry News section from the November/December 2019 issue of Gear Technology.
The future gives the gear market plenty to think about in areas like automation, additive manufacturing and machine learning.
The complete Industry News section from the May 2020 issue of Gear Technology.
Writing about additive manufacturing (AM) and the 3-D printing of gears is somewhat akin to publishing an updated dictionary. A new edition dictionary is literally already out of date before it hits Amazon's or your local bookseller's shelves. New words are coined and definitions are updated constantly. So it is with AM: The technology is evolving so quickly that technical papers and other sources of AM information require constant revision.
The latest gear industry news from Machine Tool Builders, Global Gear, EMAG, Bourn & Koch, Klingelnberg and others.
The latest news from GKN, Milan Manufacturing, Solar Atmospheres, Heidenhain, Furnaces North America, Gleason, Haas Multigrind, Schunk and Michigan Metrology
Over the past few months I've talked with several different gear manufacturers who are in the process of upgrading their gear making equipment with modern CNC machine tools. Each of these manufacturers has come to the realization that in order to stay competitive, he needs to streamline operations and become more efficient...
The complete Industry News section from the May 2013 issue of Gear Technology
The final installment of our Job Shop Lean series includes a wide variety of educational resources to help you continue your own lean journey.
Popular wisdom has it that manufacturing in the United States is no longer a viable entity. We are told that quality is poor, skilled labor is difficult to obtain, if not impossible, demand is low, and the government is helping to discourage business. So what should we do, give up?
The complete Product News section from the November/December 2014 issue.
When you push 850 horsepower and 9,000 rpm through a racing transmission, you better hope it stands up. Transmission cases and gears strewn all over the racetrack do nothing to enhance your standing, nor that of your transmission supplier.
If anyone should ever need convincing that the state of American manufacturing is in ongoing decline, consider this: the state of Michigan has the highest concentration of engineers in the country, yet also has the highest unemployment rate. But there are ripples of hope out there as grassroots and otherwise organized groups are fighting the good fight in an attempt to reverse that trend.
Two high-volume gear production cells grace the shop floor at Delta Research Corporation in Livonia, Michigan. Thanks to lean manufacturing, these cells have never shipped a defective part to a customer since they were developed over three years ago.
This article gives readers a glimpse of some companies that manufacture gears in the Far East. We've talked with more than a dozen companies in India, Taiwan and Korea...
When Forest City Gear started manufacturing gears for medical components in the 1980s, it was a minuscule part of the company's business. Today, the medical device industry represents 18-20%.
POLCA: An alternative to Kanban for high-variety or custom-engineered products.
The struggles of the manufacturing economy in 2009 are well documented. Even among those of us with long careers, most of us have never seen activity come to a screeching halt the way it did last year. 2009 was tough on all of us. So, what should we expect in 2010?
Publisher Michael Goldstein discusses the loss of U.S. manufacturing capability and what we should do about it.
A series of short reports on global manufacturing growth and the gear industry's role.
Make no mistake -- lean manufacturing is here to stay. And no wonder. As a fiercely competitive global economy continues to alter companiesâ€™ â€śMain Streetâ€ť thinking, that relatively new dynamic is spurring the need for â€śI-need-it-yesterdayâ€ť production output. And for increasingly more industries -- big or small -- that means getting as lean as you can, as fast as you can.
What was once recognized as the unique genius of America is now slipping away from us and, in many areas, is now seen as a "second rate" capability. Unless action is taken now, this country is in real danger of being unable to regain its supremacy in technological development and economic vigor. First Americans must understand the serious implications of the problem; and second, we must dedicate ourselves to national and local actions that will ensure a greater scientific and technological literacy in America.
Nashville - One of the highlights of this year's SME Advanced Gear Processing and Manufacturing Clinic was a tour of the new GM Saturn automobile manufacturing plant outside the city. There in the Tennessee hills is a hopeful vision of the future of the American automobile industry. It may well be the future of American large-scale manufacturing in general.
Computers are everywhere. It's gotten so that it's hard to find an employee who isn't using one in the course of his or her day - whether he be CEO or salesman, engineer or machinist. Everywhere you look, you find the familiar neutral-colored boxes and bright glowing screens. And despite the gear industry's traditional reluctance to embrace new technology, more and moe of what you find on those screens are gears.
Readers respond to our "Job Shop Lean" column and the "My Gear is Bigger than Your Gear" article.
Why traditional lean manufacturing approaches need to be adapted for job shop environments.
In the August issue, we examined the lean tools that will and will not work in high-mix, low-volume manufacturing facilities. Now, we will examine how to implement the tools that will work in the job shop with an approach that expands the capabilities of value stream mapping.
It wasnâ€™t so very long ago that a high school-educated, able-bodied person with a will to work typically had little trouble finding a decent job in manufacturing. Whether at an area job shop, an OEM plant or auto plantâ€”work was to be had. Work that paid well enough to marry, buy a home, feed, raise and educate a familyâ€”with even enough left over for a modest retirement pension.
Before we get into projections and prognostications about the future, letâ€™s take a minute to review 2012. For many in the gear industry, the year was better than expected. Some manufacturers had a very successful year leading up to an even more successful manufacturing trade show (IMTS 2012). Others were searching for more business, hoping that the general state of the economy wouldnâ€™t make things worse. In some cases, it did.
The complete Industry News section from the November/December 2012 issue of Gear Technology.
The complete Product News section from the January/February 2013 issue of Gear Technology.
This is the first article in an eight-part "reality" series on implementing continuous improvement at Hoerbiger Corporation. Throughout 2013, Dr. Shahrukh Irani will report on his progress applying the job shop lean strategies he developed during his time at Ohio State University.
"Design for manufacturability" (DFM) is a well-established practice, essential to realizing the successful transformation of concepts into mass-produced gears and motion control devices. And yet, all too often issues that could have been avoided are identified very late in the process that impact production costs and schedules. This suggests that key DFM principles are often underutilized in practice and are not applied consistently - or to the degree necessary - to avoid these negative results.
The Tiger Team from Hoerbiger looks for ways to cut waste and improve throughput in the company's assembly cell.
Itâ€™s been said that the best ideas are often someone else's. But with rebuilt, retrofitted, re-controlled or remanufactured machine tools, buyer beware and hold onto your wallet. Sourcing re-work vendors and their services can require just as much homework, if not necessarily dollars, as with just-off-the-showroom-floor machines.
Although a cell is dedicated to produce a single part family, it must have the requisite equipment capabilities, routing flexibility, cross-trained employees and, to the extent possible, minimal external process dependencies. Cells are often implemented in job shops since they provide the operational benefits of flowline production.
We are well into an odd-number year, so it must be just about time for another Gear Expo. Indeed, the big show -- Gear Expo 2013 -- kicks off in Indianapolis at 9:00 a.m. Tuesday, September 17, wrapping up Thursday the 19th at 4:00 p.m. And whether you are exhibiting or attending, the bottom line is you are going -- a good thing for you, your company and the tightly knit U.S. gear industry.
Job shops may be ill-advised to undertake a complete reorganization into FLEAN (Flexible and Lean) cells. A FLEAN cell would (i) be flex-ible enough to produce any and all orders for parts that belong in a specific part family and (ii) utilize lean to the maximum extent possible to eliminate waste.
The complete Industry News section from the August 2013 issue of Gear Technology.
While we recently celebrated women in manufacturing and engineering on International Womenâ€™s Day on March 8, 2021 there is rarely a day that goes by that I donâ€™t think back to the stories my own grandmother, Laurel McKinley (Hartner), shared about her experience working at the Willow Run manufacturing complex during World War II.
News Items About Dillon Manufacturing
1 IMTS Digital Technology Showcase: Dillon Manufacturing (August 7, 2020)
Special Top Jaws from Dillon Manufacturing can be manufactured from copper, brass, delrin, tool steel, 1018, 1045, 4140, 8620, A-2, 6061 ... Read News
2 Dillon Manufacturing Hard Jaws Feature Diamond-Shaped Serrations (March 3, 2020)
Hard Jaws from Dillon Manufacturing, Inc., feature diamond shaped serrations for increased pull down effect which reduces part slippage a... Read News
3 Eastec Preview: Dillon Manufacturing (March 6, 2019)
Dillon Manufacturing specializes in premium chuck jaw products for large diameter (15-60 inch) chucks, which will be featured in Eastec B... Read News
4 Dillon Manufacturing Offers Custom, Special, or Modified Top Jaws (February 21, 2019)
Special Top Jaws from Dillon Manufacturing can be manufactured to grip a components ID, OD or a combination of both, to suit any workhold... Read News
5 Dillon Manufacturing Launches New Website (November 2, 2018)
Dillon Manufacturing introduces their new website which combines expanded technical data, a comprehensive E-Catalogue, and videos to allo... Read News
6 Dillon Manufacturing Workholding Products on Display at EASTEC (April 13, 2017)
Dillon Manufacturing will feature a wide variety of workholding products in EASTEC Booth #5385, including soft jaws, hard jaws and full g... Read News
7 Dillon Manufacturing Full Grip Jaws Feature Different Material Versions for Different Applications (February 22, 2017)
Dillon Manufacturing full grip jaws available from 6 inches to 24 inches (140mm to 630mm) in diameter, with heights of 2, 4 and 6 inches,... Read News
8 Dillon Manufacturing Reversible Hard Jaws Suitable for Both ID and OD Workholding (April 20, 2016)
Reversible hard jaws from Dillon Manufacturing, Inc., which are suitable for ID and OD workholding, can decrease the time and cost of too... Read News
9 Dillon Manufacturing Jaw Force Gauges Measure Force of Individual Chuck Jaws (January 13, 2016)
New Jaw Force Gauges from Dillon Manufacturing allow users to accurately measure the force applied to each chuck jaw independently, so th... Read News
10 Dillon Manufacturing, Inc. Will Feature its Hard Jaws at Houstex (November 18, 2014)
Dillon Manufacturing, Inc. announced that it's hard jaws will be featured in Houstex booth #127. Hard jaws from Dillon Manufactu... Read News
11 Dillon Manufacturing Offers Hard Jaws (April 30, 2014)
Hard jaws from Dillon Manufacturing, Inc., feature diamond shaped serrations for increased pull down effect which reduce part slippage and push back from using a bar feeder... Read News
12 Dillon Manufacturing Jaw Nuts and Keys Improve Chuck Safety, Accuracy & Performance (July 22, 2019)
As machine tool technology continues to advance, including greater horsepower, larger material cuts, and higher machine tool speeds, the ... Read News