Inc. - Search Results
Articles About Inc.
Articles are sorted by RELEVANCE. Sort by Date.
Gearing for Munchkins Gene Kasten, president of Repair Parts, Inc., of Rockford, IL, is the proud owner of a miniature Barber-Colman hobber, the only one of its kind in the world. The machine, a replica of the old B-C "A" machine, was built between 1933 and 1941 by W. W. Dickover, who devoted 2, 640 hours of his spare time to the project.
News about the latest products in the industry.
The complete Industry News section from the August 2014 issue of Gear Technology.
"If it ain't broke, don't fix it," goes the hoary bromide. But what if the time comes - and it most surely will - that in fact it is broke? Do you fix it or replace it? And when does gearbox maintenance and repair arrive at a point of diminishing returns and buying new is the answer?
News from around the Gear Industry
News about new Products in the Industry
The complete Industry News section from the July 2019 issue of Gear Technology.
News about the Latest Products
Lastest news from around the industry.
News about recent products
News from around the Gear Industry
News about the newest products from the Gear Industry
News on the latest Products from the Industry
Peter Kozma, executive vice president of Liebherr-America, Inc., talks with us about Liebherr and its partners in the Sigma Pool.
Questions to Ask Your Heat Treater Provided by Justin Lefevre (Joyworks LLC, Ann Arbor, MI), Kathy Hayrynen (Applied Process, Inc., Livonia, MI) and Vasko Popovski (Applied Process, Inc.)
The Addendum team thought it fitting to celebrate George Orwell's 1984 with the 30th Anniversary of Gear Technology. We do not condone the extreme tactics discussed in this fictional press release unless instructed by the proper authorities.
The author has written this book primarily from the viewpoint of analyzing vibrations on heavy industrial and mill gearing that may have been in service for a prolonged time. The purpose is to diagnose problems, especially the source or cause of failure. However, the principles and analysis techniques can be used for all types and sizes of gears, as well as for gear noise analysis.
Custom Gear and Machine, Inc., of Roscoe, IL, recently purchased a Reishauer RZ400 gear grinder and, on one job, has seen the cycle time drop from 40 minutes to six minutes, according to Tim Rose, vice president of manufacturing, who runs the business with co-owners Dave Patterson and Mike Rasmann.
Two items of interest have crossed my desk in the last couple of weeks. One of them is a copy of a speech by Harry E. Figge, Jr., Chairman and CEO of Figge, International Inc., and the other is an article by Peter Brimelow in the July 19, 1993, issue of Forbes. The two items are directly related to one another, the Brimelow article being a response to the points raised in Figge's speech and in much grater detail in his book, Bankruptcy 1995: The Coming Collapse of America and How to Stop It. Both the speech and the response are well worth our attention.
Machinery's Handbook 25 by Erik Oberg, Franklin D. Jones, Holbrook L. Horton & Henry H. Ryffel, Reobert E. Green, ed., Industrial Press Inc., New York, NY, 1996 ISBA 0-8311-2424-5, $75.00 (Large Print Version, $95.00).
For two days in Saline, Michigan, Liebherr's clients, customers and friends came together to discuss the latest gear products and technology. Peter Wiedemann, president of Liebherr Gear Technology Inc., along with Dr.-Ing. Alois Mundt, managing director, Dr.-Ing. Oliver Winkel, head of application technology, and Dr.-Ing. Andreas Mehr, technology development shaping and grinding, hosted a variety of informative presentations.
Look beyond the obvious, and you may well find a better way to machine a part, and serve your customer better. Thatâ€™s the lesson illustrated in a gear machining application at Allied Specialty Precision Inc. (ASPI), located in Mishawaka, Indiana.
"If it's broken, bring it on in." That's the advice offered by Roy Parker, president and owner of Jones Welding Company Inc.
An Interview with Dr. Valery Rudnev, FASM, IFHTSE Fellow, Director of Science & Technology at Inductoheat, Inc.
News Items About Inc.
1 Maynards to Auction Surplus Equipment from Abundant Manufacturing, Inc. (April 14, 2016)
Plans are now gearing up for an auction of surplus assets from Abundant Manufacturing, Inc. and RP Machine Enterprises, Inc. This top qua... Read News
2 Heimatec Inc. Combines With Other Tooling Lines Under Platinum Tooling Technologies (December 13, 2018)
Heimatec Inc., recently announced that it will become part of a new corporation, Platinum Tooling Technologies, Inc. The announcement was... Read News
3 IMTS Digital Technology Showcase: Platinum Tooling Technologies, Inc. (September 15, 2020)
Platinum Tooling Technologies, Inc., the exclusive North American importer of Heimatec Live Tools and Angle Heads, Tecnicrafts Swiss Coll... Read News
4 Waterjet Service Inc. Changes Name to WSI Waterjet Systems International (November 1, 2012)
WSI Waterjet Systems International (formerly named Waterjet Service Inc.) , the globally established, recommended and trusted designer, m... Read News
5 Rollomatic Inc. Appoints Daniel Franklin as Team Leader of Applications and Service (March 23, 2016)
Rollomatic Inc., a subsidiary of Rollomatic Holding Switzerland, has announced the appointment of Daniel Franklin as the new Service/Appl... Read News
6 Mahr Acquires Engineering Synthesis Design Inc. (August 27, 2015)
The Mahr Group recently acquired Engineering Synthesis Design Inc. (ESDI), headquartered (Tucson, AZ). Over the past two years, Mahr... Read News
7 OSG USA, Inc. Promotes Jones to Vice President- Sales (April 13, 2015)
OSG USA, Inc. recently announced the promotion of Rick Jones to Vice President- Sales. Jones joined the OSG sales team as a District Mana... Read News
8 Dillon Manufacturing, Inc. Will Feature its Hard Jaws at Houstex (November 18, 2014)
Dillon Manufacturing, Inc. announced that it's hard jaws will be featured in Houstex booth #127. Hard jaws from Dillon Manufactu... Read News
9 IMTS Preview: MC Machinery Systems, Inc. (June 8, 2012)
MC Machinery Systems, Inc., will display several new technologies and product lines at IMTS 2012 (booth N-6825), including the new wire E... Read News
10 IMTS Preview: Hardinge Inc. (June 15, 2012)
Hardinge Inc. (Elmira, NY) manufactures workholding products to grip parts to be turned, milled, ground, welded, assembled or positioned ... Read News
11 Paul Carlson Named CEO of Tolomatic, Inc. (February 25, 2020)
Paul Carlson has been named president and chief executive officer of Tolomatic, Inc. Carlson has more than 30 years of manufacturin... Read News
12 St-Pierre Joins Nordex USA, Inc. (May 6, 2011)
Nordex USA, Inc. recently announced the appointment of Dany St-Pierre to vice president sales. A respected leader in the wind indust... Read News
13 Solar Manufacturing, Inc. Adds Sales Support in Pacific Northwest (April 5, 2010)
Solar Manufacturing, Inc. recently formed an agreement with Kelly LeBard, owner of Hartley Sales Corporation, to provide sales representa... Read News
14 Oven Industries, Inc. Receives Aerospace Certification (March 24, 2010)
Oven Industries, Inc. recently announced it has been awarded official accreditation to the AS9100 international aerospace quality standar... Read News
15 Tyrolit Inc. Appoints New President and Sales Managers (December 17, 2008)
Tyrolit Inc., a manufacturer of grinding, cut-off, sawing and drilling tools, recently announced the appointment of Chip Storie (pictured... Read News
16 Inductoheat, Inc. Announces Executive Changes (February 18, 2008)
John H. Hooper, senior vice president and general manager of Inductoheat Inc. has retired after 35 years of service at the Inductotherm G... Read News
17 Methods Machine Tools, Inc. Announces Jerry Rex as New COO (June 8, 2016)
Methods Machine Tools, Inc. announced the appointment of Jerry Rex as Chief Operating Officer of all Methods Machine Tools operations. Th... Read News
18 Groschopp Inc. Expands Iowa Facility (April 26, 2006)
Groschopp, Inc. announced recently a 10% expansion of its Sioux Center, IA manufacturing plant. The company attributed the growth to i... Read News
19 Mahr Inc. Hires Karen Gardner as Director of Human Resources (December 28, 2017)
Mahr Inc. has announced that Karen Gardner has joined the company as Director of Human Resources. Gardner has over 26 years of human res... Read News
20 Siemens Acquires MultiMechanics, Inc. (December 2, 2019)
Siemens recently announced that it has signed an agreement to acquire MultiMechanics, Inc., developer of MultiMech finite element softwar... Read News
21 Mike McKernin Joins United Stars, Inc. as Gear Group Sales and Marketing Director (September 16, 2019)
United Stars, Inc. recently announced the appointment of Michael McKernin as the gear group sales and marketing director. With 35 years i... Read News
22 Southtec Preview: EXSYS Tool, Inc. (July 25, 2019)
EXSYS Tool, Inc. will offer attendees at Southtec the chance to experience its comprehensive range of tooling technology for turning mach... Read News
23 Hardinge Inc. Announces Retirement of Board of Directors Chairman, John J. Perrotti (November 9, 2016)
The board of directors of Hardinge Inc. announced that John J. Perrotti, chairman, has chosen to retire from the board effective October ... Read News
24 Hardinge Inc. Appoints Ryan Levenson to Board of Directors (November 15, 2016)
The board of directors of Hardinge Inc. announced that it has appointed Ryan Levenson of Privet Fund Management LLC, to serve as a direct... Read News
25 Methods 3D Inc. Introduces ProX SLS 500 (February 2, 2017)
Methods 3D Inc. has introduced the 3D Systems' ProX SLS 500 Selective Laser Sintering production 3D printer featuring fast speeds, hi... Read News
26 Mahr Federal Changes Name to Mahr Inc. (June 6, 2017)
Mahr Federal has changed its name to Mahr Inc. and will immediately begin transitioning to the new company name in all legal, product and... Read News
27 Precision Gear Inc. Acquires Arrow Gear to Establish Precision Arrow Gear Group (November 19, 2018)
Precision Gear Inc. of College Point, NY is pleased to announce the acquisition of Arrow Gear Company of Downers Grove, Illinois. The Pur... Read News
28 Mahr Inc. MarOpto MT 100 Fizeau Interferometer Towers Offers In-Production Measurement Solution (November 6, 2017)
Mahr Inc. has introduced the MarOpto MT 100, the first in a new series of Fizeau interferometer towers for measuring optics directly in p... Read News
29 Mahr Inc. Promotes Don Foisy to Director of Operations (April 2, 2018)
Mahr Inc. announced that Don Foisy has been promoted to Director of Operations to support continued company growth. In his new position, ... Read News
30 Pferd Inc. Appoints John Hibbard as Regional Sales Manager (January 29, 2018)
Pferd Inc., a global manufacturer of abrasives, brushes and power tools, has announced the appointment of John Hibbard as the new Regiona... Read News
31 Mahr Inc. Hires Brett Green as Vice President Sales Americas (December 22, 2017)
Brett Green has joined Mahr Inc. as Vice President Sales Americas. Green's responsibilities include overall management of the America... Read News
32 IMTS 2016: Renishaw Inc. (E-5509) (September 8, 2016)
RVP Vision Measurement ProbeRVP, Renishaw's new vision measurement probe for use with the REVO 5-axis measurement system on coordinat... Read News
33 Oelheld U.S., Inc. Announces ControXid 1642 Rust Protection Fluid (November 13, 2014)
ControXid 1642 is a ready-to-use rust protection fluid for coolant circuits based on synthetic, water-soluble corrosion inhibitors. It is... Read News
34 IMTS Preview: Lexair Inc. (July 6, 2012)
Lexair's low-profile Flex-Grip collet closers maintain a secure, parallel grip on inconsistent workpieces using a quick-change system... Read News
35 IMTS Preview: Felsomat USA, Inc. (July 18, 2014)
Felsomat Corporation will feature the latest gear honing technology at Booth N-7040. With the introduction of the Felsomat Power Speed Ho... Read News
36 IMTS 2016: Mahr Federal Inc. (E-5614) (September 7, 2016)
Mahr Federal will feature the MarShaft Scope 250 Plus, the new MarShaft Scope 600 Plus 3D, and the MarGear GMX 400 at IMTS 2016. Also on ... Read News
37 Steinmeyer, Inc. Offers 'World's Smallest Ball Screw' (November 21, 2014)
The ultra-minature ball screws are available in diameters as small as 3 millimeter with a choice of two pitches – 1 millimeter... Read News
38 IMTS 2016: Zoller Inc. (W-2022) (September 9, 2016)
»hobCheck« Gear Hob Measuring MachineThe Zoller »hobCheck« brings an expanded range of possibilities and solution... Read News
39 IMTS 2016: Liebherr Gear Technology, Inc. (N-6930) (August 30, 2016)
LGG 280 Gear Grinding MachineWith a one-table design and a new-design grinding head, the new Liebherr LGG 280 gear grinding machine great... Read News
40 IMTS 2016: Oelheld U.S. Inc. (N-7475) (September 9, 2016)
SintoGrind IG 540Oelheld's SintoGrind IG 540 grinding oil is designed for flute grinding, profile grinding and outside and inside dia... Read News
41 IMTS 2016: Hardinge Inc. (S-8738) (September 6, 2016)
Hardinge Talent 51 MSY CNC Turning CenterThe all-new Hardinge Talent 51 MSY CNC Turning Center will make its debut at IMTS. This machine ... Read News