Index Technologies - Search Results

Articles About Index Technologies


Articles are sorted by RELEVANCE. Sort by Date.

1 Show Stoppers (September/October 2019)

Motion + Power Technology Expo VIP Exhibitors special advertising section.

2 Product News (March/April 2020)

Gleason skiving machines equipped with on-board cutter sharpening; Helios celebrates anniversary of cutter sharpener line; and more product news.

3 Industry News (November/December 2020)

The complete Industry News section from the November/December 2020 issue of Gear Technology.

4 Gear Chamfering Robot (January/February 2011)

Banyan Technologies introduces a robotic chamfering device suitable for deburring, chamfering and radiusing the edges of slew bearing ring gears.

5 Industry News (January/February 2013)

The complete Industry News section from the January/February 2013 issue of Gear Technology.

6 No Compromising on Quality at Allison Transmission (July 2014)

Gleason 350GMS helps put higher quality, more reliable gears into its next-generation TC10 automatic transmission.

7 Portable Gear Inspection (July 2014)

Compact, custom and portable solutions are gaining more attention in manufacturing today as companies seek out the tools that offer the greatest productivity gains on the shop floor. Gear inspection seems to be following suit.

8 Honing of Gears (August 2014)

The honing of gears - by definition - facilitates ease of operation, low noise and smoother performance in a transmission. Honing also contributes to reduced friction in the powertrain. Both the intense cutting (roughing process) as well as the functionally fine- finishing of transmission gears can be performed in one setup, on one machine.

9 Product news (August 2016)

News about the latest products in the industry.

10 Product News (September/October 2014)

The complete product news section from the September / October 2014 Issue Gear Technology.

11 Industry News (January/February 2017)

News from around the Gear Industry

12 Industry News (May 2017)

Faydor Litvin, 1914-2017; Michael Goldstein receives AGMA Distinguished Service Award.

13 Product News (July 2017)

The complete Product News section from the July 2017 issue.

14 Gear Expo 2017 and ASM Heat Treat 2017 Booth Previews (September/October 2017)

The latest technology on display in Columbus, OH. October 24-26.

15 Product News (March/April 2018)

New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.

16 Product News (August 2018)

The complete Product News section from the August 2018 issue of Gear Technology.

17 Industry News (March/April 2020)

The complete Industry News section from the March/April issue of Gear Technology.

18 Product News (September/October 2019)

The complete Product News section from the September/October 2019 issue of Gear Technology.

19 Industry News (November/December 2019)

The complete Industry News section from the November/December 2019 issue of Gear Technology.

20 Product News (March/April 2015)

The complete Product News section from the March/April 2015 issue of Gear Technology.

21 Full Speed Ahead (May 2012)

Indexable carbide insert (ICI) cutting tools continue to play a pivotal role in gear manufacturing. By offering higher cutting speeds, reduced cycle times, enhanced coatings, custom configurations and a diverse range of sizes and capabilities, ICI tools have proven invaluable for finishing and pre-grind applications. They continue to expand their unique capabilities and worth in the cutting tool market.

22 Systematic Investigations on the Influence of Viscosity Index Improvers on EHL Film Thickness (November/December 2001)

Mineral-oil-base lubricants show a significant decrease of kinematic viscosity with rising temperature, as exemplified in Figure 1 by lubricants for vehicle gears. An important attribute of lubricants is their viscosity index (VI), according to DIN/ISO 2909 (Ref. 4). Viscosity index is a calculated coefficient, which characterizes the change of viscosity of lubricants as a function of temperature. A high viscosity index represents a low variation of viscosity due to temperature and vice versa. A low viscosity-temperature-dependence is required for lubricants that are operated at significantly varying temperature conditions, such as vehicle engine and gear lubricants in summer and winter time. This way, the oils remain flowing and pumpable at low temperatures on the one hand; and on the other hand, sufficiently thick lubricant films can be formed at higher temperatures for a safe separation of the surfaces.

23 Progress in Gear Milling (January/February 2013)

Sandvik presents the latest in gear milling technologies.

24 The Technology Shift (May 2014)

Decades ago, technology shifted from HSS to indexable inserts in turning and milling. This movement wasn't immediately realized in gear hobbing because coated PM-HSS hobs and complex gear profiles remained highly effective and productive methods. Only fairly recently have gear manufacturers started to take a serious look at indexable technology to cut gear teeth.

25 Product News (July 2014)

The complete Product News section from the July 2014 issue of Gear Technology.

26 The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob (July 2014)

Recently, a new type of hob with carbide inserts has been introduced, providing higher cutting speeds, longer tool life and higher feed rates when compared to re-grindable, high-speed steel hobs. But with this kind of hob, new challenges occur due to positional errors of the cutting edges when mounted on the tool. These errors lead to manufacturing errors on the gear teeth which must be controlled. In this paper, the tooth quality of a gear manufactured by hobs with different quality classes is analyzed using a simulation model in combination with Monte Carlo methods.

27 Industry News (June 2015)

News from Around the Gear Industry

28 Industry News (July 2018)

The complete Industry News section from the July 2018 issue of Gear Technology.

29 Product News (August 2015)

News about the newest products from the Gear Industry

30 Product News (November/December 2015)

News about recent products

31 All-For-One, One-For-All (May 2016)

The "less is more" mantra is certainly a rallying cry in manufacturing. Technologies like multiaxis machining, 3D printing and automation are enabling companies to be more efficient, cost-conscious and flexible on the shop floor.

32 Show Stoppers (August 2016)

Our special advertising section featuring some of the premier gear industry suppliers at IMTS 2016.

33 Product News (November/December 2016)

News about new Products in the Industry

34 Product News (January/February 2017)

News about all of the upcoming products int he industry.

35 Industry News (August 2018)

The complete Industry News section from the August 2018 issue of Gear Technology.