Iowa State University - Search Results

Articles About Iowa State University


Articles are sorted by RELEVANCE. Sort by Date.

1 Repairing a Stone Gear (August 2019)

How do you fix a stone gear that has a chipped tooth and has surfaces roughened by acid erosion and covered in black grime? You bring in an art conservator.

2 Chiming in on Gear Noise: Three Experts Have their Say (August 2011)

It is said that “The squeaky wheel gets the grease.” Ok, but what about gear noise? We talked to three experts with considerable knowledge and experience in this area.

3 Step Right Up and Have Your Fortune Told (November/December 2014)

Most companies spend this time of year crystal ball gazing. Managers want to know the future so they can make projections, plan schedules, determine budgets and make major decisions that will ensure their success.

4 State of the Gear Industry Special Edition (January/February 2019)

Gear industry experts give their opinions about the most important trends facing gear manufacturers today.

5 2019 State of the Gear Industry (January/February 2019)

Overall, the gear industry enjoyed a very strong 2018, and the optimism expressed by survey respondents is the highest in recent years. When asked about their optimism regarding their companies’ ability to compete over the next five years, 85.8% of respondents indicated some level of optimism.

6 Gravy Training (January/February 2019)

We’ve just come off a very strong year for gear manufacturing, and most of you are looking forward to another good year in 2019. At least, that’s what the results of our annual State-of-the-Gear-Industry survey tell us.

7 2018 State of the Gear Industry (January/February 2018)

Results from our annual survey of gear manufacturers reveal that business is good, but the skilled labor situation is not.

8 We'd Grow Faster If We Could (January/February 2018)

It's probably no surprise to anyone that the majority of the gear industry had a pretty good year in 2017, and that most gear manufacturers are expecting a pretty good 2018 as well. After all, most major economic indicators - including the ones that focus on the manufacturing sector - have been positive for some time.

9 Slow and Steady (January/February 2017)

The results of our Annual State of the Gear Industry Survey (See page 26) provided insight on 2016 as well as forecasts for 2017. Here is additional insight from some of the industry's leaders.

10 2017 State of the Gear Industry (January/February 2017)

Gear Technology's annual State of the Gear Industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry.

11 Challenges Tempered by Optimism (January/February 2017)

For many of us, 2016 was a rough year - and the results of our annual State of the Gear Industry Survey show it. 40% of respondents indicated their companies had cut staff, while only 27% indicated an increase in employment. Clearly, there have been widespread cutbacks.

12 2015 State of the Gear Industry Reader Survey (November/December 2015)

Gear Technology's annual State-of-the-Gear-Industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry. As in years past, the survey was conducted anonymously, with invitations sent by e-mail to gear manufacturing companies around the world.

13 2015 State of the Gear Industry (November/December 2015)

From the Economics to 4.0 — Industry Leaders Have Their Say

14 2014 State of the Gear Industry (November/December 2014)

Gear Technology's annual State-of-the-Gear-Industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry.

15 2015: MORE OF THE SAME (November/December 2014)

From a technological perspective, there typically aren't many EUREKA! breakthroughs in the "state of the gear industry" to report, and 2014 was really no different.

16 2013 State of the Gear Industry (November/December 2013)

Gear Technology’s annual State-of- the-Gear-Industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry. As in years past, the survey was conducted anonymously, with invitations sent by e-mail to gear manufacturing companies around the world.

17 State of the Gear Industry 2008 (November/December 2008)

Results of research on trends in employment, outsourcing, machine tool investment and other gear industry business practices.

18 US Gear Industry Doing Well, but Challenges Await (November/December 2013)

If you are like most navigators of the printed page, the first thing you read in this final 2013 issue of Gear Technology was our State of the Gear Industry Survey. And who would blame you? It’s not Sabermetrics, but once you’ve read it you’ll have a pretty clear snapshot of last year and a peek into the next. But if you also like to get a little closer to the bone about things, what follows are the collected opinions of five well-regarded people in the gear industry speaking to a number of issues with relevance.

19 Measured Optimism (November/December 2013)

Gear manufacturers are generally an optimistic bunch, as revealed by our 2013 State-of-the-Gear-Industry Survey, which appears in this issue.

20 Gear Research Institute (May 2013)

The essence of designing gears is often by necessity risk-averse, given that many of them are used in applications where loss of life is a distinct possibility. The Gear Research Institute (GRI) at The Pennsylvania State University conducts risk reduction testing with the same goal in mind - whether it be gears in fighter jets, Ferris wheels, tanks, or countless other gear-reliant vehicles and machinery.

21 2012 State of the Gear Industry (November/December 2012)

Gear Technology’s annual state-of-the-gear-industry survey polls gear manufacturers about the latest trends and opinions relating to the overall health of the gear industry. As in years past, the survey was conducted anonymously, with invitations sent by e-mail to gear manufacturing companies around the world.

22 M & M Precision, Penn State & NIST Team Up For Gear Metrology Research (July/August 1997)

In 1993, M & M Precision Systems was awarded a three-year, partial grant from the Advanced Technology Program of the Department of Commerce's National Institute of Standards and Technology (NIST). Working with Pennsylvania State University, M&M embarked on a technology development project to advance gear measurement capabilities to levels of accuracy never before achieved.

23 An American Success Story (March/April 1997)

Joe Garfien came to America in 1928 to play soccer. He also learned to cut gears and build a business. "When I came here [to America] I came in on a Friday, and I had to go work on Monday, so I found a job at Perfection Gear...and that's how I got started in gears."

24 Drivetrain Research An Idea Whose Time is Overdue (July/August 1995)

The popular perception today is that technological advancement is an engine running almost out of control. New products and processes are developing faster than we can keep up with them, as anyone who has had a new computer system crash into obsolescence practically before it's out of the box can tell you. But that's not the case everywhere. Transmission technology, for example.

25 State of the Gear Industry 2011 (November/December 2011)

In November, Gear Technology conducted an anonymous survey of gear manufacturers. Invitations were sent by e-mail to thousands of individuals around the world. More than 300 individuals responded to the online survey, answering questions about their manufacturing operations and current challenges facing their businesses.

26 State of the Gear Industry 2010 (November/December 2010)

Results of Gear Technology research on trends in employment, outsourcing, machine tool investment and other gear industry business practices.

27 State of the Gear Industry 2007 (November/December 2007)

Results of research on trends in employment, outsourcing, machine tool investment and other gear industry business practices.

28 State of the Gear Industry 2009 (November/December 2009)

In October, Gear Technology conducted an anonymous survey of gear manufacturers. Invitations were sent by e-mail to thousands of individuals around the world. More than 300 individuals responded to the online survey, answering questions about their manufacturing operations and current challenges facing their businesses.

29 Clogged Supply Chain Has Gear Manufacturers in Hurry Up and Wait Mode (November/December 2008)

Never have so few served so many. That, in essence, describes gear makers and the role they play in our world. Think of it—although the gear cutting industry represents much less than one percent of the global workforce—the gears it produces are what make things run in practically every industry and profession imaginable. From bulldozers to Rolexes, gears are an integral part of the mix.

30 The Efficiency Experts (September/October 2010)

Bradley University and Winzeler Gear collaborate on the design and development of an urban light vehicle.