Kapp Niles Metrology - Search Results

Articles About Kapp Niles Metrology


Articles are sorted by RELEVANCE. Sort by Date.

1 Industry News (June 2017)

The complete Industry News section from the June 2017 issue of Gear Technology.

2 Gear Grinding Today (June 2017)

New divisions, open houses and the continued rise of the Industrial Internet of Things - There's been a lot going on in gear grinding in the past year.

3 IMTS 2014 Product Preview (August 2014)

An in-depth look at the major booths with the latest technology used in gear manufacturing.

4 Industry News (November/December 2018)

The complete Industry News section from the November/December 2018 issue of Gear Technology.

5 Portable Gear Inspection (July 2014)

Compact, custom and portable solutions are gaining more attention in manufacturing today as companies seek out the tools that offer the greatest productivity gains on the shop floor. Gear inspection seems to be following suit.

6 Watch It - Revolutions (March/April 2019)

It's time to catch up on the episodes of Revolutions that you might have missed.

7 Product News (January/February 2014)

The complete Product News section from the January/February 2014 issue of Gear Technology.

8 Innovations for High Productivity Generating Grinding (June 2016)

In comparison to the visionary Industry 4.0 - or the Fourth Industrial Revolution - the machine tool industry can appear rather down-to-earth.

9 Gear Expo 2017 and ASM Heat Treat 2017 Booth Previews (September/October 2017)

The latest technology on display in Columbus, OH. October 24-26.

10 Industry News (March/April 2013)

The complete Industry News section from the March/April 2013 issue of Gear Technology.

11 GT Extras (November/December 2013)

GT Videos and upcoming trade shows featured on the site, links to our 2014 Media Kits and current discussions on LinkedIn and Facebook.

12 GT Extras (May 2013)

What's new on the Gear Technology website this month? Videos from DMG Mori-Seiki, the latest e-mail newsletter and updates on upcoming events, including the Kapp-Niles Rocky Mountain Gear School.

13 Wanted, Custom-Made Machine Tools (August 2013)

The machine tool industry is as competitive as ever. New machine technologies, materials, coatings and software upgrades are changing the way gears are being manufactured. Companies like Gleason, Liebherr, Kapp/Niles and DMG/Mori Seiki spend plenty of time and resources on R&D to develop the best products for the gear market. More importantly, these companies engage with (and listen to) customer requests.

14 Product News (January/February 2019)

The complete Product News section from the January/February issue of Gear Technology.

15 Product News (July 2014)

The complete Product News section from the July 2014 issue of Gear Technology.

16 Product News (August 2014)

The complete Product News section from the August 2014 issue of Gear Technology.

17 Practical Considerations for the Use of Double-Flank Testing for the Manufacturing Control of Gearing - Part II (March/April 2014)

Part I of this paper, which appeared in the January/February issue of Gear Technology, described the theory behind double-flank composite inspection. It detailed the apparatus used, the various measurements that can be achieved using it, the calculations involved and their interpretation. The concluding Part II presents a discussion of the practical application of double-flank composite inspection -- especially for large-volume operations. It also addresses statistical techniques that can be used in conjunction with double-flank composite inspection, as well as an in-depth analysis of gage R&R for this technique.

18 Product News (August 2013)

The complete Product News Section from the August 2013 issue of Gear Technology.

19 Product News (October 2012)

The complete Product News section from the October 2012 issue of Gear Technology.

20 GT Extras (June/July 2013)

Video from Hexagon Metrology, Back-to-Basics archive, e-mail newsletter updates and what's happening on LinkedIn

21 Product News (June/July 2013)

The complete Product News section from the June/July 2013 issue of Gear Technology.

22 First International Involute Gear Comparison (August 2014)

Measurement institutions of seven different countries — China, Germany, Japan, Thailand, Ukraine, United Kingdom and the U.S. — participated in the implementation of the first international comparison of involute gear measurement standards. The German metrology institute Physikalisch-Technische Bundesanstalt (PTB) was chosen as the pilot laboratory as well as the organizer. Three typical involute gear measurement standards provided by the PTB were deployed for this comparison: a profile, a helix and a pitch measurement standard. In the final analysis, of the results obtained from all participants, the weighted mean was evaluated as reference value for all 28 measured parameters. However, besides the measurement standards, the measured parameters, and, most importantly, some of the comparison results from all participants are anonymously presented. Furthermore, mishandling of the measurement standards as occurred during the comparison will be illustrated.

23 GT Extras (March/April 2014)

GT Videos featuring R&P Metrology, the latest from our Twitter and LinkedIn feeds and an introduction to gearboxfailure.com

24 Measuring Left and Right (July 2017)

CMM Inspection vs. GMM Inspection. Speed is the name of the game.

25 Industry News (August 2017)

Results from the 2017 Powder Metallurgy Design Excellence Awards, plus other news from around the industry.

26 Overlapping Pursuits (July 2018)

More than any other field, IIoT overlaps directly with metrology's mission to analyze and measure as much of the manufacturing process as possible, and it's no surprise that the latter is utilizing the former.

27 In-Process, Complete Gear Inspection at Light Speeds (July 2018)

New GRSL technology adds value to high-volume transmission gear inspection by combining non-contact laser inspection with tried-and-true composite roll testing.

28 Inspection System Upgrades Meet EV Gear Challenges (July 2018)

Delta Research upgrades its Gleason Metrology Workhorses to meet the development requirements of the latest electrical drive vehicles.

29 Inspection Focus News & Technology (July/August 2000)

This section is dedicated to what's new and what's happening in the world of gear inspection and metrology. Here you will find news about products, companies and organizations, services and events affecting the gear inspection and metrology industry.

30 Industry News (July 2017)

AGMA adds two new committees, Star Cutter Celebrates 90 years, plus other news from around the industry.

31 Industry News (September/October 2014)

The complete Industry News section from the September / October 2014 issue of Gear Technology.

32 Product News (September/October 2018)

See the latest gear industry products from Marposs, GWJ Technology, Norton|Saint Gobain, Mitutoyo, C&B Machinery, DMG Mori, Gear Motions and LK Metrology.

33 Gear Inspection at Light Speed (July 2017)

Revolutionary new inspection technologies are helping gear manufacturers develop and produce more complex, higher quality gears in a fraction of the time it used to take.

34 Product News (September/October 2014)

The complete product news section from the September / October 2014 Issue Gear Technology.

35 Gear Inspection and Measurement (July/August 1992)

The purpose of gear inspection is to: Assure required accuracy and quality, Lower overall cost of manufacture by controlling rejects and scrap, Control machines and machining practices and maintain produced accuracy as machines and tools wear, Determine hear treat distortions to make necessary corrections.

36 Industry News (May 2017)

Faydor Litvin, 1914-2017; Michael Goldstein receives AGMA Distinguished Service Award.

37 Industry News (January/February 2018)

Fraunhofer CMI focuses on new U.S. gear and transmission technologies group, plus other news from around the industry.

38 Cutting Down on Setup Time (June 2018)

With increasingly smaller returns from improving the speed of the actual gear grinding process, improving your setup time has become a primary way to keep improving efficiency. Here's the latest on how you can do that today.

39 Better Gears & Splines With Metrology (July 2007)

What does it mean to make "better" gears? Better gears more closely resemble the intended design parameters.

40 Gear Shop of Tomorrow (November/December 2016)

It's Monday morning, December 15, 2036. An autonomous vehicle drops off two engineers in front of a gear manufacturing facility in Metro Detroit. They punch in for work on their wristwatches and pay Uber for the ride on a smartphone. One of the engineers begins walking the shop floor, monitoring a series of collaborative robots using a tablet the size of a paperback novel. These robots interact right on the floor with the minimal staff scheduled to oversee manufacturing operations. Another engineer wears an interactive headset and begins training a group of new engineers (in real time) from China using some form of augmented reality.

41 Industry News (September/October 2016)

News From Around the Gear Industry

42 The Changing Industrial Landscape (March/April 2009)

Companies weigh in on green technology and sustainable efforts.

43 Gear Grinding Gets Integrated at IMTS 2012 (October 2012)

The latest machines, tooling and technology for gear grinding were featured at IMTS 2012.

44 Industry News (August 2014)

The complete Industry News section from the August 2014 issue of Gear Technology.

45 Practical Magic - Metrology Products Keep Pace with Machine Technology (July 2009)

Gear metrology is a revolving door of software packages and system upgrades. It has to be in order to keep up with the productivity and development processes of the machines on the manufacturing floor. Temperature compensation, faster inspection times and improved software packages are just a few of the advancements currently in play as companies prepare for new opportunities in areas like alternative energy, automotive and aerospace/defense.

46 Extending the Benefits of Elemental Gear Inspection (July 2009)

It may not be widely recognized that most of the inspection data supplied by inspection equipment, following the practices of AGMA Standard 2015 and similar standards, are not of elemental accuracy deviations but of some form of composite deviations. This paper demonstrates the validity of this “composite” label by first defining the nature of a true elemental deviation and then, by referring to earlier literature, demonstrating how the common inspection practices for involute, lead (on helical gears), pitch, and, in some cases, total accumulated pitch, constitute composite measurements.

47 Rebuilding a Metrology Infrastructure (January/February 1996)

The American Society of Mechanical Engineers (ASME) announced at Gear Expo '95 that a national service for the calibration of involute artifacts is now available at the Department of Energy's Y-12 Plant in Oak Ridge, TN.

48 M & M Precision, Penn State & NIST Team Up For Gear Metrology Research (July/August 1997)

In 1993, M & M Precision Systems was awarded a three-year, partial grant from the Advanced Technology Program of the Department of Commerce's National Institute of Standards and Technology (NIST). Working with Pennsylvania State University, M&M embarked on a technology development project to advance gear measurement capabilities to levels of accuracy never before achieved.

49 The Basics of Gear Metrology and Terminology Part I (September/October 1998)

It is very common for those working in the gear manufacturing industry to have only a limited understanding of the fundamental principals of involute helicoid gear metrology, the tendency being to leave the topic to specialists in the gear lab. It is well known that quiet, reliable gears can only be made using the information gleaned from proper gear metrology.

50 The Next Step in Bevel Gear Metrology (January/February 1996)

In recent years, gear inspection requirements have changed considerably, but inspection methods have barely kept pace. The gap is especially noticeable in bevel gears, whose geometry has always made testing them a complicated, expensive and time-consuming process. Present roll test methods for determining flank form and quality of gear sets are hardly applicable to bevel gears at all, and the time, expense and sophistication required for coordinate measurement has limited its use to gear development, with only sampling occurring during production.

51 Gear Metrology Standards and ISO 9000 (May/June 1994)

I noted with interest the beginning of Gear Technology's three-part series on ISO 9000 certification. I also recently attended Brown & Sharpe's/Leitz gear metrology seminar. Both events caused me to smile and reflect.

52 Dearborn Precision Puts Dual Purpose Zeiss CMM to the Task (May 2011)

When parts you manufacture pass through numerous processes such as deep hole drilling, machining, hobbing and grinding, a CMM is essential when your customers require 100 percent in-process and final inspection.

53 Not All Good Ideas Are Brand New (September 2011)

A reader clarifies technology presented in the March/April 2011 issue.

54 Recent Developments in Gear Metrology (November/December 1991)

Metrology is a vital component of gear manufacturing. Recent changes in this area, due in large part to the advent of computers, are highlighted in this article by comparison with more traditional methods.

55 The Basics of Gear Metrology and Terminology Part II (November/December 1998)

In the last section, we discussed gear inspection; the types of errors found by single and double flank composite and analytical tests; involute geometry; the involute cam and the causes and symptoms of profile errors. In this section, we go into tooth alignment and line of contact issues including lead, helix angles, pitch, pitchline runout, testing and errors in pitch and alignment.