Kapp Technologies - Search Results
Articles About Kapp Technologies
Articles are sorted by RELEVANCE. Sort by Date.
Compact, custom and portable solutions are gaining more attention in manufacturing today as companies seek out the tools that offer the greatest productivity gains on the shop floor. Gear inspection seems to be following suit.
Faydor Litvin, 1914-2017; Michael Goldstein receives AGMA Distinguished Service Award.
Tom Lang liked what he saw in the Gear Generation Pavilion at IMTS 2004. Standing in his booth, Kapp Technologiesâ vice president/general manager talked with many attendees during the show and afterward said: âWe had an increase of both quality and quantity of visitors.â
Tom Lang of Kapp Technologies shares his views on the trends affecting ground gears.
The latest technology on display in Columbus, OH. October 24-26.
The complete Industry News section from the March/April 2013 issue of Gear Technology.
Kapp Niles celebrates young inventors, Solar Atmospheres expands, Klingelnberg increases training programs, Liebherr celebrates 50 years in the USA, Timken Expands Southeast regional repair facility and more news for the gear industry.
Companies weigh in on green technology and sustainable efforts.
Motion + Power Technology Expo VIP Exhibitors special advertising section.
The complete Industry News section from the August 2018 issue of Gear Technology.
The complete Product News section from the August 2018 issue of Gear Technology.
New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.
The complete Product News section from the July 2017 issue.
News from around the Gear Industry
News about the latest products in the industry.
The complete product news section from the September / October 2014 Issue Gear Technology.
The honing of gears - by definition - facilitates ease of operation, low noise and smoother performance in a transmission. Honing also contributes to reduced friction in the powertrain. Both the intense cutting (roughing process) as well as the functionally fine- finishing of transmission gears can be performed in one setup, on one machine.
Gleason 350GMS helps put higher quality, more reliable gears into its next-generation TC10 automatic transmission.
The complete Industry News section from the January/February 2013 issue of Gear Technology.
Banyan Technologies introduces a robotic chamfering device suitable for deburring, chamfering and radiusing the edges of slew bearing ring gears.
It's time to catch up on the episodes of Revolutions that you might have missed.
Integrated Production Chains from Kapp Niles, an alternative to press quenching from Seco/Warwick, an expansion of the Profilator line and more.
What's new on the Gear Technology website this month? Videos from DMG Mori-Seiki, the latest e-mail newsletter and updates on upcoming events, including the Kapp-Niles Rocky Mountain Gear School.
The complete Industry News section from the November/December 2018 issue of Gear Technology.
The latest machines, tooling and technology for gear grinding were featured at IMTS 2012.
Fraunhofer CMI focuses on new U.S. gear and transmission technologies group, plus other news from around the industry.
The complete Industry News section from the June 2017 issue of Gear Technology.
New divisions, open houses and the continued rise of the Industrial Internet of Things - There's been a lot going on in gear grinding in the past year.
It's Monday morning, December 15, 2036. An autonomous vehicle drops off two engineers in front of a gear manufacturing facility in Metro Detroit. They punch in for work on their wristwatches and pay Uber for the ride on a smartphone. One of the engineers begins walking the shop floor, monitoring a series of collaborative robots using a tablet the size of a paperback novel. These robots interact right on the floor with the minimal staff scheduled to oversee manufacturing operations. Another engineer wears an interactive headset and begins training a group of new engineers (in real time) from China using some form of augmented reality.
News From Around the Gear Industry
In comparison to the visionary Industry 4.0 - or the Fourth Industrial Revolution - the machine tool industry can appear rather down-to-earth.
The complete Industry News section from the August 2014 issue of Gear Technology.
An in-depth look at the major booths with the latest technology used in gear manufacturing.
The complete Product News section from the January/February 2014 issue of Gear Technology.
GT Videos and upcoming trade shows featured on the site, links to our 2014 Media Kits and current discussions on LinkedIn and Facebook.
The machine tool industry is as competitive as ever. New machine technologies, materials, coatings and software upgrades are changing the way gears are being manufactured. Companies like Gleason, Liebherr, Kapp/Niles and DMG/Mori Seiki spend plenty of time and resources on R&D to develop the best products for the gear market. More importantly, these companies engage with (and listen to) customer requests.
With increasingly smaller returns from improving the speed of the actual gear grinding process, improving your setup time has become a primary way to keep improving efficiency. Here's the latest on how you can do that today.
News Items About Kapp Technologies
1 Kapp Technologies, Penta Gear and Koepfer America Announce Technical Sales Collaboration (October 12, 2018)
Kapp Technologies L.P. (KTLP), Penta Gear Metrology LLC (PGM) and Koepfer America LLC (KA) have entered into an agreement for technical s... Read News
2 Kapp Technologies Takes Majority Ownership in Penta Gear Metrology (September 8, 2016)
Kapp Technologies announces it has become majority partner in Penta Gear Metrology, LLC. Penta Gear Metrology LLC builds both functi... Read News
3 Hollingsworth Joins Kapp Technologies Sales Team (May 16, 2016)
Kapp Technologies has announced that Shane Hollingsworth has joined their sales team. Hollingsworth will represent Kapp Niles customers i... Read News
4 Tom Lang Retires from Kapp Technologies (January 19, 2006)
Thomas J. Lang, vice president and general manager of Kapp Technologies, announced plans to leave the company at the end of the y... Read News
5 Kapp Technologies Announces Personnel Changes (April 11, 2017)
Michael Ruppert joined the Kapp Group in Germany in 2005 and moved to the Boulder, Colorado operation in 2007 to run the tool manufacturi... Read News
6 IMTS 2016: Kapp Technologies (N-7036) (September 6, 2016)
Kapp Niles will feature three machines at the International Manufacturing Technology Show (IMTS).KX 100 Dynamic Gear CenterThe KX 100 Dyn... Read News
7 IMTS Preview: Kapp Technologies (August 6, 2014)
Two new Kapp Niles gear grinders and the latest portable gear inspection system from R&P Metrology GmbH will be introduced at Booth N... Read News