additive manufacturing - Search Results
Articles About additive manufacturing
Articles are sorted by RELEVANCE. Sort by Date.
Writing about additive manufacturing (AM) and the 3-D printing of gears is somewhat akin to publishing an updated dictionary. A new edition dictionary is literally already out of date before it hits Amazon's or your local bookseller's shelves. New words are coined and definitions are updated constantly. So it is with AM: The technology is evolving so quickly that technical papers and other sources of AM information require constant revision.
Emerging technologies such as robotics/automation, new materials, additive manufacturing and IIoT can and will change the course of gear manufacturing for the foreseeable future.
How 3-D printing is changing the powder metal performance game.
The future gives the gear market plenty to think about in areas like automation, additive manufacturing and machine learning.
The complete Product News section from the November/December 2020 issue of Gear Technology.
Latest news about the Latest Products
In a capitalist society, the way things usually work is that government and academia focus on research and development, while industry focuses on commercialization. The result is an increasingly wide disconnect in the applied research sector, which deals primarily with technology development and demonstration.
News From Around the Gear Industry
Our special advertising section featuring some of the premier gear industry suppliers at IMTS 2016.
Latest News from around the industry
Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.
Latest new from the Gear Industry
News about New Products
The latest from Liebherr, Gleason, Klingelnberg and more.
The complete Industry News section from the March/April 2015 issue of Gear Technology.
In this special section, our editors have gathered recent news and information related to the heat treatment of gears. Here youâ€™ll find a comprehensive assortment of news and upcoming events that will help you understand the various heat treatment processes available for gears and choose the best option for your projects, whether you heat treat in-house or send your gears to a commercial heat treating provider.
The complete Product News section from the March/April 2015 issue of Gear Technology.
News from around the Gear Industry
The complete product news section from the September / October 2014 Issue Gear Technology.
Over the past few months I've talked with several different gear manufacturers who are in the process of upgrading their gear making equipment with modern CNC machine tools. Each of these manufacturers has come to the realization that in order to stay competitive, he needs to streamline operations and become more efficient...
News from around the Gear Industry
Gear Technology hosts dinner for technical contributors to the gear industry during this year's AGMA Fall Technical Meeting and Gear Expo in Columbus, OH. Plus other news from around the industry.
The presidents of two manufacturing companies were having a drink in the lobby before the start of their trade association's annual meeting...
The complete Product News section from the September/October 2019 issue of Gear Technology.
The Digital Manufacturing Revolution Evolves in 2020
The latest gear industry news from Machine Tool Builders, Global Gear, EMAG, Bourn & Koch, Klingelnberg and others.
The complete Industry News section from the May 2020 issue of Gear Technology.
Gleason skiving machines equipped with on-board cutter sharpening; Helios celebrates anniversary of cutter sharpener line; and more product news.
The complete Industry News section from the November/December 2019 issue of Gear Technology.
Motion + Power Technology Expo VIP Exhibitors special advertising section.
The complete Industry News section from the July 2019 issue of Gear Technology.
The latest news from GKN, Milan Manufacturing, Solar Atmospheres, Heidenhain, Furnaces North America, Gleason, Haas Multigrind, Schunk and Michigan Metrology
The secret to meeting today's inspection demands is influenced by the technology and those in charge of operating it.
The complete Industry News section from the March/April 2019 issue of Gear Technology.
The complete Product News section from the March/April 2019 issue of Gear Technology.
In helicopter applications, the two-piece gear is typically joined by welding, bolts, or splines. In the case of the U.S. Army CH-47D Chinook helicopter, a decision was made to eliminate these joints through the use of integral design. Integral shaft spiral bevel gears must be designed such that the shaft does not interfere with gear tooth cutting and grinding. This paper discusses techniques to iterate in the design stage before manufacturing begins.
New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.
Fraunhofer CMI focuses on new U.S. gear and transmission technologies group, plus other news from around the industry.
The complete Industry News section from the August 2014 issue of Gear Technology.
As the founder, president and co-host of Manufacturing Talk Radio, as well as publisher of Metals & Manufacturing Outlook eZine, I am excited to report that the economic outlook for 2018 is just too good not to tout. Whatever "final GDP number" the government divines for 2017, the year will finish above 3% for the first time in a decade.
The final installment of our Job Shop Lean series includes a wide variety of educational resources to help you continue your own lean journey.
The complete Product News section from the January/February 2014 issue of Gear Technology.
When Forest City Gear started manufacturing gears for medical components in the 1980s, it was a minuscule part of the company's business. Today, the medical device industry represents 18-20%.
What was once recognized as the unique genius of America is now slipping away from us and, in many areas, is now seen as a "second rate" capability. Unless action is taken now, this country is in real danger of being unable to regain its supremacy in technological development and economic vigor. First Americans must understand the serious implications of the problem; and second, we must dedicate ourselves to national and local actions that will ensure a greater scientific and technological literacy in America.
Make no mistake -- lean manufacturing is here to stay. And no wonder. As a fiercely competitive global economy continues to alter companiesâ€™ â€śMain Streetâ€ť thinking, that relatively new dynamic is spurring the need for â€śI-need-it-yesterdayâ€ť production output. And for increasingly more industries -- big or small -- that means getting as lean as you can, as fast as you can.
A series of short reports on global manufacturing growth and the gear industry's role.
Publisher Michael Goldstein discusses the loss of U.S. manufacturing capability and what we should do about it.
The struggles of the manufacturing economy in 2009 are well documented. Even among those of us with long careers, most of us have never seen activity come to a screeching halt the way it did last year. 2009 was tough on all of us. So, what should we expect in 2010?
POLCA: An alternative to Kanban for high-variety or custom-engineered products.
This article gives readers a glimpse of some companies that manufacture gears in the Far East. We've talked with more than a dozen companies in India, Taiwan and Korea...
Popular wisdom has it that manufacturing in the United States is no longer a viable entity. We are told that quality is poor, skilled labor is difficult to obtain, if not impossible, demand is low, and the government is helping to discourage business. So what should we do, give up?
Two high-volume gear production cells grace the shop floor at Delta Research Corporation in Livonia, Michigan. Thanks to lean manufacturing, these cells have never shipped a defective part to a customer since they were developed over three years ago.
If anyone should ever need convincing that the state of American manufacturing is in ongoing decline, consider this: the state of Michigan has the highest concentration of engineers in the country, yet also has the highest unemployment rate. But there are ripples of hope out there as grassroots and otherwise organized groups are fighting the good fight in an attempt to reverse that trend.
When you push 850 horsepower and 9,000 rpm through a racing transmission, you better hope it stands up. Transmission cases and gears strewn all over the racetrack do nothing to enhance your standing, nor that of your transmission supplier.
A reader asks: While I have read a reasonable amount of the literature on the pros and cons of anti-wear and anti-scuff additives, I find that the more I read, the more confused I become. I could use some clarity in my life.
Aircraft transmissions for helicopters, turboprops and geared turbofan aircraft require high reliability and provide several thousand hours of operation between overhauls. In addition, They should be lightweight and have very high efficiency to minimize operating costs for the aircraft.
Today gear drive operations have several options when selecting the proper lubricant for their gearboxes. As in the past, the primary lubricant used for gearbox lubrication is mineral oil. But with the advances in technology, synthetic hydrocarbons (PAOs) and polyglycols show very specific advantages in certain applications. With gear drives becoming more and more precise, it is now also to the benefit of the gear operator to verify that he or she has the proper additive package and viscosity in the lubricant selected. Fig. 1 shoes that a gear oil is a combination of a base oil and specific additives. The base oils can be either mineral oil, a synthetic or even in some cases a combination of the two.
This article discusses the potential effects observed for different antiwear and EP chemistry on the micropitting of cylindrical gears.
Nashville - One of the highlights of this year's SME Advanced Gear Processing and Manufacturing Clinic was a tour of the new GM Saturn automobile manufacturing plant outside the city. There in the Tennessee hills is a hopeful vision of the future of the American automobile industry. It may well be the future of American large-scale manufacturing in general.
Computers are everywhere. It's gotten so that it's hard to find an employee who isn't using one in the course of his or her day - whether he be CEO or salesman, engineer or machinist. Everywhere you look, you find the familiar neutral-colored boxes and bright glowing screens. And despite the gear industry's traditional reluctance to embrace new technology, more and moe of what you find on those screens are gears.
The complete Product News section from the October 2013 issue of Gear Technology.
Itâ€™s been said that the best ideas are often someone else's. But with rebuilt, retrofitted, re-controlled or remanufactured machine tools, buyer beware and hold onto your wallet. Sourcing re-work vendors and their services can require just as much homework, if not necessarily dollars, as with just-off-the-showroom-floor machines.
The complete Product News section from the September 2013 issue of Gear Technology.
Readers respond to our "Job Shop Lean" column and the "My Gear is Bigger than Your Gear" article.
The complete Industry News section from the August 2013 issue of Gear Technology.
Job shops may be ill-advised to undertake a complete reorganization into FLEAN (Flexible and Lean) cells. A FLEAN cell would (i) be flex-ible enough to produce any and all orders for parts that belong in a specific part family and (ii) utilize lean to the maximum extent possible to eliminate waste.
We are well into an odd-number year, so it must be just about time for another Gear Expo. Indeed, the big show -- Gear Expo 2013 -- kicks off in Indianapolis at 9:00 a.m. Tuesday, September 17, wrapping up Thursday the 19th at 4:00 p.m. And whether you are exhibiting or attending, the bottom line is you are going -- a good thing for you, your company and the tightly knit U.S. gear industry.
Although a cell is dedicated to produce a single part family, it must have the requisite equipment capabilities, routing flexibility, cross-trained employees and, to the extent possible, minimal external process dependencies. Cells are often implemented in job shops since they provide the operational benefits of flowline production.
The complete Industry News section from the May 2013 issue of Gear Technology
The Tiger Team from Hoerbiger looks for ways to cut waste and improve throughput in the company's assembly cell.
Why traditional lean manufacturing approaches need to be adapted for job shop environments.
"Design for manufacturability" (DFM) is a well-established practice, essential to realizing the successful transformation of concepts into mass-produced gears and motion control devices. And yet, all too often issues that could have been avoided are identified very late in the process that impact production costs and schedules. This suggests that key DFM principles are often underutilized in practice and are not applied consistently - or to the degree necessary - to avoid these negative results.
This is the first article in an eight-part "reality" series on implementing continuous improvement at Hoerbiger Corporation. Throughout 2013, Dr. Shahrukh Irani will report on his progress applying the job shop lean strategies he developed during his time at Ohio State University.
The complete Product News section from the January/February 2013 issue of Gear Technology.
The complete Industry News section from the November/December 2012 issue of Gear Technology.
Before we get into projections and prognostications about the future, letâ€™s take a minute to review 2012. For many in the gear industry, the year was better than expected. Some manufacturers had a very successful year leading up to an even more successful manufacturing trade show (IMTS 2012). Others were searching for more business, hoping that the general state of the economy wouldnâ€™t make things worse. In some cases, it did.
It wasnâ€™t so very long ago that a high school-educated, able-bodied person with a will to work typically had little trouble finding a decent job in manufacturing. Whether at an area job shop, an OEM plant or auto plantâ€”work was to be had. Work that paid well enough to marry, buy a home, feed, raise and educate a familyâ€”with even enough left over for a modest retirement pension.
In the August issue, we examined the lean tools that will and will not work in high-mix, low-volume manufacturing facilities. Now, we will examine how to implement the tools that will work in the job shop with an approach that expands the capabilities of value stream mapping.
Gear-related new technology from Helios, Chiron, C-B Gear & Machine, Marposs, Dillon Manufacturing, Schunk, Forest City Gear and more.
News Items About additive manufacturing
1 Optomec Demonstrates 5-Axis Metal Additive Manufacturing (May 23, 2019)
At RAPID-TCT, Optomec is demonstrating simultaneous five-axis additive manufacturing at its booth (#517) this week in Detroit, enabling n... Read News
2 Siemens Opens Additive Manufacturing Network to Healthcare Providers (March 27, 2020)
In response to the ongoing global health crisis caused by the outbreak of the COVID-19 virus, Siemens is making its Additive Manufacturin... Read News
3 Open Mind Announces Additive Manufacturing Capabilities for hyperMILL (December 30, 2019)
Open Mind Technologies AG, a leading developer of CAD/CAM software solutions worldwide, announced it offers an Additive Manufacturing cap... Read News
4 Siemens Opens Additive Manufacturing Network (November 25, 2019)
Siemens has announced the official launch and general availability of the Siemens Additive Manufacturing (AM) Network, following pilots a... Read News
5 Metal Additive Manufacturing Conference Seeks Technical Papers (August 16, 2019)
The program committee for the Additive Manufacturing with Powder Metallurgy Conference (AMPM2020) has issued a “Call for Papers &am... Read News
6 AGMA Announces Additive Manufacturing Publication for Gear Making (April 16, 2019)
The American Gear Manufacturers Association (AGMA) announced the publication of an emerging technology document, Additive Manufacturing T... Read News
7 ITAMCO Ramps Up Additive Manufacturing with EOS Printer (August 29, 2017)
ITAMCO (Indiana Technology and Manufacturing Companies) is delivering components to the medical device industry made with their new EOS M... Read News
8 Mazak Integrex i-200S AM Offers All-in-One Milling and Additive Manufacturing Capabilities (January 3, 2017)
Mazak continues to fortify its industry leadership in hybrid multi-tasking machine technology with the introduction of its new Integrex i... Read News
9 Renishaw Introduces Additive Manufacturing Systems (May 16, 2012)
Renishaw's new laser melting additive-metal manufacturing process is capable of producing fully dense metal parts direct from 3-D CAD... Read News