ald - Search Results

Articles About ald


Articles are sorted by RELEVANCE. Sort by Date.

1 Mystery Gear on the Mountain (September/October 2008)

Gear on a mountain, you say? How can that be? Someone must be stricken with a bad case of altitude sickness to create that sort of delusion. What’s next, gears in space? On a glacier?

2 Industry News (October 2012)

The complete Industry News section from the October 2012 issue of Gear Technology.

3 Heat Treat 2013 (March/April 2013)

An overview of the latest technology and trends in heat treating.

4 Feedback - My Gear Is Bigger than Your Gear (May 2013)

Readers respond regarding the article from March/April 2013.

5 Heat Treat Suppliers Focused on Gears (August 2013)

Heat treat suppliers look to the gear industry and the upcoming combined Gear Expo/Heat Treat 2013 for new business.

6 Industry News (January/February 2014)

The complete Industry News section from the January/February 2014 issue of Gear Technology.

7 Industry News (March/April 2016)

News from around the Gear Industry

8 Ask Not What Your Heat Treater Can Do for You... (July 2017)

When sending gears to be heat treated, manufacturers can end up unwittingly making mistakes that slow down turnaround time. We talked to some heat treaters to get their best advice on how you can help them help you.

9 In Memoriam: Donald R. McVittie (March/April 2008)

It is with regret we report that Donald R. McVittie passed away January 20, 2008.

10 At the PEEK of the Polymer Food Chain (June 2010)

In the hypercompetitive race to increase automobile efficiency, Metaldyne has been developing its balance shaft module line with Victrex PEEK polymer in place of metal gears. The collaborative product development resulted in significant reductions in inertia, weight and power consumption, as well as improvement in noise, vibration and harshness (NVH) performance.

11 Leonardo, the Engineer (January/February 1989)

These lines, interesting enough, are from the notebooks of an artist whose images are part of the basic iconography of Western culture. Even people who have never set foot in a museum and wouldn't know a painting by Corregio from a sculpture by Calder, recognize the Mona Lisa. But Leonardo da Vinci was much more than an artist. He was also a man of science who worked in anatomy, botany, cartography, geology, mathematics, aeronautics, optics, mechanics, astronomy, hydraulics, sonics, civil engineering, weaponry and city planning. There was little in nature that did not interest Leonardo enough to at least make a sketch of it. Much of it became a matter of lifelong study. The breadth of his interests, knowledge, foresight, innovation and imagination is difficult to grasp.

12 Powder Metallurgy Innovations (September/October 1999)

Powder metal. To gear makers today, the phrase conjures images of low power applications in non-critical systems. As powder metal technology advances, as the materials increase in density and strength, such opinions are changing. It is an ongoing, evolutionary process and one that will continue for some time. According to Donald G. White, the executive director of the Metal Powder Industries Federation, in his State-of-the-P/M Industry - 1999 report. "The P/M world is changing rapidly and P/M needs to be recognized as a world-class process - national, continental and even human barriers and prejudices must be eliminated - we must join forces as a world process - unified in approach and goals."

13 The OSU Gear and Power Transmission Research Laboratory: Where Innovation Thrives (March/April 2013)

When, in 1980, OSU professor Donald R. Houser created the Gear and Power Transmission Research Laboratory - then known as the Gear Dynamics and Gear and Power Transmission Laboratory (GearLab) - he did so with the seed money provided by just three companies. Thirty-three years out, the lab has continued to grow, impress and—most importantly - succeed; it now boasts a roster of some 50 sponsoring companies and government agencies.

14 Coffeegate (January/February 2015)

The other day I went to Starbuck’s and ordered my usual four shots of espresso, straight up. I know what you’re thinking: that’s a lot of caffeine, especially for someone as naturally energetic as I am. But after years and years, I may have built up a tolerance to the caffeine. I picked up the espresso habit as a much younger man, when I worked for Daldi & Matteucci (DEMM) in Italy back in the ’70s. And I’ve stuck with it ever since.

15 What Was He Thinking (August 2016)

Having read about an automobile race in France, Kohlsaat decided he'd host America's first auto race in Chicago. The year was 1895 and automobiles were still a great curiosity. Kohlsaat, owner/publisher of the Chicago Times Herald, planned to exploit the growing interest in motoring by sponsoring a 54-mile race from downtown Chicago to nearby suburb Evanston, Illinois, and back. The match was open to all comers, foreign or domestic, whether powered by gas, electricity, or steam. The top prize: $2,000 (that's 50,000 2016 dollars).

16 Vacuum Carburizing Takes Center Stage (July 2008)

ALD-Holcroft Vacuum Technologies Co. will host a two-day technical symposium at the Henry Ford Museum in Dearborn, Michigan September 23– 24, 2008.

17 Design Against Tooth Interior Fatigue Fracture (November/December 2000)

In a modern truck, the gear teeth are among the most stressed parts. Failure of a tooth will damage the transmission severely. Throughout the years, gear design experience has been gained and collected into standards such as DIN (Ref. 1) or AGMA (Ref. 2). Traditionally two types of failures are considered in gear design: tooth root bending fatigue, and contact fatigue. The demands for lighter and more silent transmissions have given birth to new failure types. One novel failure type, Tooth Interior Fatigue Fracture (TIFF), has previously been described by MackAldener and Olsson (Refs. 3 & 4) and is further explored in this paper.

News Items About ald

1 Metaldyne Purchases Forging Technologies (January 19, 2006)
Metaldyne announced its purchase agreement with Forging Technologies Inc. related to the acquisition of Metaldyne's North American fo... Read News

2 Ajax Tocco Magnethermic Promotes Donald Gibeaut to Manager, Tubular Products (August 25, 2017)
Ajax Tocco Magnethermic (ATM) announced the promotion of Donald Gibeaut to Manager Tubular Products. Gibeaut has worked in the induction ... Read News

3 Heiko Machine Tools Chosen to Sell Cesar Galdabini Products (August 3, 2015)
Heiko Machine Tools (Canton, MI) recently announced that it has been chosen by Cesar Galdabini SPA (Milan, Italy) as the sales and market... Read News

4 Star SU Representing Galdabini (August 6, 2010)
A cooperation agreement has been reached between Galdabini and Star SU for sale and after-sales service of manual and automatic straighte... Read News

5 Baldor Expands Worm Gear Reducer Line (February 4, 2009)
The Dodge Ultra Kleen right-angle worm gear reducer line has been expanded by Baldor Electric Company. Housed in 316 stainless steel for ... Read News

6 Baldor Agrees to Buy Rockwell Automation Division (April 7, 2006)
Baldor Electric Co. has agreed to purchase the power systems business of Rockwell Automation Inc. for $1.8 billion, in a deal expected to... Read News

7 ALD Vacuum Systems Sells SyncroTherm Vacuum Heat Treating System (May 10, 2017)
ALD Vacuum Systems, Inc. has received a purchase order from a North American based aerospace manufacturer for a SyncroTherm brand, fully-... Read News

8 AMG Subsidiary ALD Vacuum Technologies Acquires ALD-Holcroft (February 18, 2016)
AMG Advanced Metallurgical Group N.V. has announced that ALD Vacuum Technologies has acquired the remaining 50 percent share of thei... Read News

9 ALD-Holcroft to Provide SyncroTherm Heat Treating System to Woodward (May 15, 2015)
ALD-Holcroft (Wixom, MI) recently entered into an agreement with Woodward, Inc. (Fort Collins, CO) to provide a fully-integrated SyncroTh... Read News

10 ALD Vacuum Technologies Partners with Nukem and E.ON (July 22, 2014)
AMG Advanced Metallurgical Group N.V. recently announced that its AMG Engineering unit, ALD Vacuum Technologies GmbH signed a Memorandum ... Read News

11 ALD Announces Dates for Vacuum Carburizing Symposium (November 26, 2013)
ALD-Holcroft has announced the dates for the 8th Vacuum Carburizing Symposium, to be held in 2014 on May 6th and 7th. This two-day event ... Read News

12 ALD-Holcroft Installs ModulTherm System (March 8, 2013)
ALD-Holcroft, Wixom, MI, has successfully installed and commissioned a Four (4) chamber ModulTherm system; the first of three (3) systems... Read News

13 BeaverMatic Welcomes Anderson and McDonald (November 18, 2011)
Scott Anderson joins BeaverMatic Inc., as software engineer for its operator interface terminals and programmable logic controllers of at... Read News

14 ALD-Holcroft Expands Product Line (June 8, 2009)
The MonoTherm single chamber vacuum furnace, a product known on the global market through ALD Vacuum Technologies of Hanua, Germany, is a... Read News

15 Joint Venture for AFC Holcroft and ALD Vacuum (April 19, 2005)
AlD Holcroft of Wixom, MI, and ALD Vacuum Technologies GmbH of Hanau, Germany, have formed a joint venture called Joint Venture ALD Vacuu... Read News