dvs technology group - Search Results
Articles About dvs technology group
Articles are sorted by RELEVANCE. Sort by Date.
EMO is arguably the most important trade show when it comes to the introduction of machine tool technology, and this year's show - taking place from September 18-23 in Hannover, Germany - promises not to disappoint. We've talked to a number of gear manufacturing technology providers to give you a sneak peak of what you can expect to see if you attend this year.
The latest news AGMA Foundation, DVS Technology Group, Mitutoyo and more.
The latest news from DVS Technology Group, Gear Motions, Amorphology, Star Cutter and more.
he complete Industry News section from the November/December 2021 issue of Gear Technology.
News from around the Gear Industry
News about new Products in the Industry
This special edition of Product News includes highlights from Gear Expo 2017 of new products that caught the editors' eyes.
The latest gear industry products from WFL Millturn, NUM, Superior Abrasives, GWJ Technology, Helios Gear Products, CAS Dataloggers and SMW Autoblok.
The complete Industry News section from the September/October 2020 issue of Gear Technology.
New grinding machines, multi-tasking machines, gear software and tools for gear manufacturers.
Software Providers Examine the Dynamic Behavior of Gear Noise.
The complete Product News section from the July 2018 issue of Gear Technology.
Liebherr and Wenzel announce sales and service agreement; MPIF releases new powder metal standard; Gear Motions announces promotions; Profilator opens new factory and more gear industry news.
See the latest gear industry products from Marposs, GWJ Technology, Norton|Saint Gobain, Mitutoyo, C&B Machinery, DMG Mori, Gear Motions and LK Metrology.
The complete industry news section from the May 2018 issue of Gear Technology.
Technical articles have been the hallmark of Gear Technology since we first started publishing, more than 34 years ago, in 1984. One of the achievements IĂ˘??m most proud of is the development of the GT LIBRARY at geartechnology.com, where you can find every single one of those articles, going all the way back to the beginning.
The complete Industry News section from the January/February 2019 issue of Gear Technology.
Say 'YES' to getting the best and latest in gear industry technical information and news. Resubscribe now to Gear Technology.
A key part of gear design software development is customer feedback. With the right feedback, you can get your software developer to work for you to provide the most relevant features possible.
Accurate prediction of gear dynamic factors (also known as Kv factors) is necessary to be able to predict the fatigue life of gears. Standards-based calculations of gear dynamic factors have some limitations. In this paper we use a multibody dynamic model, with all 6 degrees of freedom (DOF) of a high-speed gearbox to calculate gear dynamic factors. The findings from this paper will help engineers to understand numerous factors that influence the prediction of dynamic factors and will help them to design more reliable gears.
We've decided to install a man-cave at our office here at Randall Publications. Comfy chairs, surround sound, flat screen, the works. We're going all out, because we have some important watching to do. But before you get the wrong idea, we're not goofing off and binge-watching Stranger Things. No, we're watching Gear Technology TV.
Gear Technology hosts dinner for technical contributors to the gear industry during this year's AGMA Fall Technical Meeting and Gear Expo in Columbus, OH. Plus other news from around the industry.
The complete Product News section from the March/April 2019 issue of Gear Technology.
The latest technology on display in Columbus, OH. October 24-26.
Special Advertising Section featuring Gear Expo exhibitors.
Help us by renewing your subscription to Gear Technology.
A high number of wind turbine gearboxes do not meet their expected design life, despite meeting the design criteria of current bearing, gear and wind turbine industry standards and certifications.
News about all of the upcoming products int he industry.
News on the latest products in the industry.
As most of you know by now, the trade show formerly known as Gear Expo is now the Motion + Power Technology Expo. If you're a gear-industry veteran, you might be confused by this change. If you've been coming to the show for years - or exhibiting at it - you might even feel a little betrayed. But I'm here to tell you it's going to be alright.
When you go to MPT Expo, make sure to visit the exhibitors in our special advertising section!
It's time to catch up on the episodes of Revolutions that you might have missed.
On behalf of the AGMA Board of Directors, Show Committee and our 123 exhibiting companies â€” thank you for supporting Motion + Power Technology Expo 2021 (MPT Expo).
Gear-related new technology from Klingelnberg, WFL, Junker, Schunk and more.
Gear-related new technology from Affolter Group, Liebherr, PTG Holroyd, BMW Motorrad and more.
The latest news from AGMA, EMAG Group, Star Cutter, MHI and more.
The latest gear industry news from Machine Tool Builders, Global Gear, EMAG, Bourn & Koch, Klingelnberg and others.
News from around the Industry
Latest new from the Gear Industry
The complete Industry News section from the March/April 2015 issue of Gear Technology.
The complete Industry News section from the January/February 2013 issue of Gear Technology.
Higher operating temperatures can be detrimental for the quality of oil which can, in turn, cause gearbox durability issues.
At the recently held Motion+Power Technology Expo, we had the opportunity to sit down with a number of exhibitors to learn more about the latest in technology for the mechanical power transmission industry â€“ including gear manufacturing machine tools, workholding, inspection equipment and much more.
The complete Product News section from the June 2019 issue of Gear Technology.
Whatâ€™s New and Whatâ€™s Next at Motion + Power Technology Expo?
The Gear Industry â€” and companies from the entire power transmission supply chain â€” will gather in-person at Motion + Power Technology Expo 2021
Gear-related new technology from FVA, EMAG, Marposs, PTG Holroyd, GWJ Technology and Big Kaiser
It takes a lot to put together a magazine like this one, issue after issue. There are articles to edit, materials to gather, production to coordinate, layouts to develop, subscriptions to enter and much, much more.
The complete Industry News section from the May 2020 issue of Gear Technology.
Last issue's farewell editorial by our founder and original publisher, Michael Goldstein, sparked a lot of feedback and comments from our readers. Here's a sampling of what your fellow subscribers had to say.
When I started Gear Technology more than 35 years ago, my intention was to create something of lasting value for the gear industry. It was a way of giving back to the industry that had been so good to me and my family.
Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.
In addition to hundreds of relevant suppliers, Motion+Power Technology Expo (Oct. 15-17 in Detroit) also offers many opportunities for learning.
There have always been plenty of reasons to attend Gear Expo. For decades, itâ€™s been the best place to see all of the technology, vendors and solutions in the gear industry, all under one roof. Now that it's the Motion + Power Technology Expo, it's even more true.
News about the latest products in the industry.
So there is little chance that they need the same software to assist with their work. Gone are the days when companies wrote their own code and process engineers thumbed the same tattered reference book.
News about the newest products from the Gear Industry
THANK YOU! The response to our first issue has been extremely exciting for us. Our advertisers have told us GEAR TECHNOLOGY is being talked about wherever they go. Thank you for the wonderful and enthusiastic reception.
Beginning with our next issue, some of the promised changes in format for Gear Technology will begin showing up in these pages. As part of our commitment to provide you with important information about the gear and gear products industry, we are expanding our coverage. In addition to continuing to publish some of the best results of gear research and development throughout the world, we will be adding special columns covering vital aspects of the gearing business.
Six years ago this month, the very first issue of Gear Technology, the Journal of Gear Manufacturing, went to press. The reason for starting the publication was a straightforward one: to provide a forum for the presentation of the best technical articles on gear-related subjects from around the world. We wanted to give our readers the information they need to solve specific problems, understanding new technologies, and to be informed about the latest applications in gear design and manufacturing. The premise behind Gear Technology was also a straightforward one: the better informed our readers were about the technology, the more competitive they and their companies would be int he world gear market.
Expertise is a resource that's hard to sustain. We're doing our part via our "Ask the Expert" feature. How about you?
As the time came to write this editorial, the replies to our survey from the last issue were just starting to pour in. We were gratified by the number of responses we received and by the amount of time many of you spent answering in great detail the text questions on the survey. Because of this unusually large response, it will take us some months to log, digest and respond to all the data. Thank you for this nice "problem."
As Gear Technology moves toward its third anniversary, we feel that we have reached a point in our development where it is time to pause, reflect on our accomplishments and plan for the future.
Positive feedback regarding Gear Technology, the Journal of Gear Manufacturing, from some of its new readers.
The last two months have been both a time of difficulty and of growth for Gear Technology. Unexpectedly, I found myself in the hospital having surgery, and consequently out of commission for several weeks. At the same time, two individuals on our staff lost family members, and most of this period saw us getting ready for this preshow IMTS issue while being seriously short-staffed.
This issue of Gear Technology, The Journal of Gear Manufacturing, marks the end of our second year of publication. As we approach our third year, it is time to review our statement of purpose. Gear Technology's primary goal was and is to be a reference source and a forum for the American Gear industry, and to advance gear technology throughout the world.
As I travel around the country visiting with many of our customers, I am finding that not only are we, as an advertiser in the journal, meeting our advertising needs, but you are also meeting those very high ideals that you put before us during that meeting.
Over the years, we have traveled extensively throughout the industrialized world, and became increasingly aware of the availability of enormous amounts of technical writing concerning research, experiments, and techniques in the gear manufacturing field. New manufacturing methods, materials, and machines were continuously being developed, but the technical information about them was not readily available to those that could best use it. There was no central source for disseminating this knowledge.
Investigation of Gear Rattle Phenomena The article by Messrs. Rust, Brandl and Thien was very interesting in its description of the problem and of some of the interactions which occur.
Publisher Michael Goldstein describes his experiences at the IPTEX 2012 show and the unveiling of Gear Technology India.
In India, â€śnamasteâ€ť is used as a common greeting. Although it translates literally to â€śI bow to you,â€ť itâ€™s often used the same way we use â€śhelloâ€ť or â€śgood-bye.â€ť Itâ€™s a phrase commonly exchanged between individuals when they meet, and itâ€™s also used as a salutation when they part. Iâ€™m using the phrase here because Iâ€™d like to introduce you to an exciting new project and venture for Randall Publications LLC.
Publisher Michael Goldstein describes the success of Gear Technology's new e-mail newsletter programs.
Michael Goldstein talks about 25 years of Gear Technology, looking behind as well as ahead.
Have you ever been to Malaysia? How about Indonesia, Brazil, Slovakia or Russia? Well, we have. We go there every issue.
Gear-related new technology from Norton Quantum Prime Grain, Danobat, Big Kaiser, Heidenhain and more.
The complete Product News section from the July 2019 issue of Gear Technology.
The complete Industry News section from the March/April 2019 issue of Gear Technology.
The complete Product News section from the January/February issue of Gear Technology.
The DVS gearing specialist Praewema Antriebstechnik continues to expand its technological expertise in order to keep pace with the growing significance of planetary geartrains for automatic and particularly electric vehicles, with the associated need for even higher-precision production of toothed gear components.
It always strikes me as something of an irony that the brightest holidays of the year fall in the deepest part of the darkest season. They come when the days are the shortest, the clouds the thickest, the weather (at least in Chicago), the worst. And yet it is at precisely this time when we celebrate the happier human emotions of family, love, and charity and somewhat arbitrarily declare a "new" year.
This issue of Gear Technology marks another milestone in the life of our magazine. After publishing 51 issues - nearly 200 articles containing close to 2,500 pages - we're ready to try something new.
If there wasnâ€™t such a thing as air (seriously, who even needs it?), gears might stand alone as the most ever-present entities on earth. They are literally everywhere you turn â€” a universal, inescapable part of the world we live in, sort of like Justin Bieber but with less hair gel and electronic synthesizers.
Gear Technology's complete back issue archive is now available online. Read more about the archive in this issue's GT Extras. Also highlighted are a new video from Koepfer and the Gear Technology e-mail newsletter.
Most companies spend this time of year crystal ball gazing. Managers want to know the future so they can make projections, plan schedules, determine budgets and make major decisions that will ensure their success.
There are varying opinions as to what constitutes innovation, but in our industry and in the engineering world as a whole, we typically think of innovation as being the use of technologies different from those we use at the moment to do things better, faster and cheaper.
The complete product news section from the September / October 2014 Issue Gear Technology.
Publisher Michael Goldstein describes what it means to him that Gear Technology is celebrating its 30th anniversary.
The gear industry is full of storytellers. It's a niche market that boasts a remarkable cast of characters that have been sharing their stories with us for 30 years. In that time, the editors and staff of Gear Technology magazine have had the privilege to report the ins and outs of this highly-specialized industry. From technical articles to case studies and features, the main focus of this magazine has been to "provide a forum of discovery and innovation for you, the gear manufacturing industry." Our Publisher, Michael Goldstein, said as much in our inaugural issue of May/June 1984.
Gear Technology magazine begins the celebration of our 30-year anniversary.
The complete Industry News section from the October 2013 issue of Gear Technology.
The complete Industry News section from the June/July 2013 issue of Gear Technology.
Publisher Michael Goldstein explores Gear Technology's history and its future as he introduces the back issue archive online and our new features and columns for 2013.
The complete Industry News section from the November/December 2012 issue of Gear Technology.
A little more than ten years ago this month, the first Gear Technology came off the presses. It was a fledgling effort in every respect. The gear industry had never a magazine of its very own before. Those of us involved in its production were like first-time parents; we were proud and excited, but unsure of what we'd let ourselves in for. None of us knew if this baby could really fly.
Romax Technology, the gearbox, bearing and driveline engineering specialist, has launched a new design software package that will increase speed, quality, creativity and innovation when designing gearboxes and drivelines. Called Concept, the new product delivers on the Romax vision of streamlining the end-to-end, planning-to-manufacture process with open, easy to use software solutions. It has been developed in close collaboration with engineers in the largest ground vehicle, wind energy and industrial equipment companies around the globe.
Until recently, there was a void in the quality control of gear manufacturing in this country (Ref. 1). Gear measurements were not traceable to the international standard of length through the National Institute of Standards and Technology (NIST). The U.S. military requirement for traceability was clearly specified in the military standard MIL-STD-45662A (Ref. 2). This standard has now been replaced by commercial sector standards including ISO 9001:1994 (Ref. 3), ISO/IEC Guide 25 (Ref, 4), and the U.S. equivalent of ISO/IEC Guide 25 - ANSI/NCSL Z540-2-1997 (Ref. 5). The draft replacement to ISO/IEC Guide 25 - ISO 17025 states that measurements must either be traceable to SI units or reference to a natural constant. The implications of traceability to the U.S. gear industry are significant. In order to meet the standards, gear manufacturers must either have calibrated artifacts or establish their own traceability to SI units.
Let's face it. The Internet is still, to many of us, exciting, confusing, terrifying and frustrating by turns. The buzzwords change so fast that even the most high tech companies have a hard time keeping up. Cyberspace. Firewall, Java. E-commerce. The list goes on.
Every once in a while something happens to fundamentally change the nature of your business. Despite the best of intentions and the most careful planning, there's no way we can anticipate every event. What do you do, for example, when your two biggest competitors merge, when the economy collapses in the region that imports your products or when key employees leave your company? Your reactions may make the difference between success and struggling to survive.
Just back from IMTS and once again, I'm struck by the enormous vitality and strength of the manufacturing sector of the U.S. economy. It has made a phoenix-like rise from the grave dug for it by pundits in the '80s and has come back more robust and competitive than ever.
You've been reading about it, talking about it, maybe even trying it. Gear Technology has jumped aboard it feet first and begun a voyage on the World Wide Web. Beginning with this issue, an electronic version of the magazine will be online. For those of us who still find the fax machine amazing technology, this is a great leap.
Every now and then a magazine has to take its own pulse or lose sight of its key mission - providing its readers with information they want. We did it this last year through surveys, interviews with subscribers and focus groups. Our basic question was, how are we doing?
Sometimes in the pressure to meet deadlines and handle the Crisis of the Day, we lose sight of the forest for the trees. As a partial cure for this syndrome, I recently reviewed the six interviews with gear industry leaders that have appeared in our pages during the last year, trying to get a grasp of a larger picture. It struck me with renewed force how six men, each with a lifetime of experience in this business, see the gear industry forest the same way.
Beginning with this issue, one of the last bits of the "old" Gear Technology is gone. From now on we'll be running the new picture of me you see on this page. It was time, my art and editorial staff explained to me, to move ahead with the rest of the updated art and editorial in the magazine. (I emphatically deny that the real motivation for the new picture was putting a stop to the ever-increasing number of jabs from certain friends about my "Dorian Gray" look.)
Welcome to the new Gear Technology. With this issue we begin bringing you a new look - a new cover, new graphics, a new, broader and more inclusive editorial focus. Our goal is to be an even better resource for the entire gear industry.
The complete Product News section from the November/December 2021 issue of Gear Technology.
News Items About dvs technology group
1 DVS Technology Group Moves Forward with New Management (July 16, 2021)
On July 1, 2021, Dr. Christoph Müller-Mederer began his new role as CEO of DVS Technology AG. He was previously a member of the Exec... Read News
2 DVS Technology Group Completes Executive Board Reshuffle (April 6, 2021)
As of April 1, 2021, DVS Technology Group/DVS Technology AG will initially appoint Dr. Christoph Müller-Mederer to the executive boa... Read News
3 DVS Technology Group Presenting Gear Grinding Solutions at EMO (September 20, 2017)
The EMO fair booth of DVS Technology Group in Hall 17, Booth C46 will be focusing on the high-precision machining of components for power... Read News
4 IMTS 2016: DVS Technology Group (N-6762) (August 19, 2016)
Buderus Schleiftechnik UGrind Workshop MachineBuderus Schleiftechnik will be presenting the new Buderus UGrind - an innovative workshop m... Read News