events - Search Results
Articles About events
(SPONSORED CONTENT)Carburizing Gears in Vacuum
Solar Atmospheres provides low pressure vacuum carburizing (LPVC) that significantly increases the surface hardness/strength of steel parts for improved friction and wear. Performing LPVC in a vacuum furnace eliminates oxygen and prevents IGO (intergranular oxidation) that is inherent in atmospheric carburizing, resulting in clean parts with less distortion reducing post process finishing operations, and costs. Article Courtesy of Solar Atmospheres
Articles are sorted by RELEVANCE. Sort by Date.
Calendar of upcoming events
Forensics isn't just for tough-talking, crime-busting scientists--most commonly found on your television; the tactic also holds the key to successful gearbox design and manufacture.
Calendar of Events
Calendar of upcoming Events
In this issue we will cover Call for Papers, Latest Videos, and Upcoming Events.
Details about the Solutions Center, SME and AGMA special events at the show.
The complete events section from March/April 2006, including a feature on the Koepfer Gear School and our technical calendar.
Advance coverage of India's Gears, Motors & Controls Expo 2009, plus our regular calendar of events.
The complete events section, including Technical Calendar, from the September/October 2008 issue of Gear Technology.
The complete Events section from May/June 2005.
The complete Events section from the August 2008 issue of Gear Technology. Includes the Technical Calendar.
The complete Events section, including technical calendar, from the July 2008 issue of Gear Technology
The complete Events section from the June 2008 issue of Gear Technology.
IMTS exists primarily as a buy-and-sell North American venue for practically every conceivable technology used in manufacturing, and in that regard it has no equal. There youâ€™ll find on display the latest and greatest technology, from hardware to software and everything in between. But anyone who has attended past shows is aware that IMTS is much more than that. Following is a rundown of "extracurricular" activities youâ€™ll find waiting for your edification and enjoyment.
2008 World Congress on Powder Metallurgy, plus the technical calendar. Complete Events section from May 2008 Gear Technology.
The complete Events section from the March/April 2008 issue of Gear Technology.
The complete Events section from November/December 2005, including post-show coverage of Gear Expo 2005, AGMA's Fall Technical Meeting, and our regular technical calendar.
The complete Events section from July/August 2005, including coverage of EMO 2005.
The complete Events section from the September/October 2005 issue of Gear Technology, including a profile of the UTS plastic gear course.
The complete Events section from March/April 2005, including coverage of Hannover Fair and SAE World Congress.
The complete Events and Technical Calendar section
The complete Events section from January/February 2005, including coverage of a vacuum carburizing conference.
The complete Events section from the November/December 2008 issue of Gear Technology
Advance coverage of EMO Milan 2009, plus our technical calendar.
Listing of papers to be presented and activities for the 2007 AGMA Fall Technical Meeting.
The complete Events section from the January/February 2009 issue of Gear Technology.
The complete Events section from May/June 2006, including profiles of the University of Wisconsin gear seminars and the MPIF international conference on powder metallurgy.
The complete Events section from July/August 2006, including a profile on the UTS gear course.
The complete Events section from September/October 2006, including a profile of gear seminars offered by WZL.
The complete Events section from November/December 2006, including coverage of Gear China.
PowderMet 2009, plus the full technical calendar for Gear Technology's June 2009 issue.
The AGMA/ABMA Annual Meeting took place April 10-12 in St. Petersburg, Florida. Between committee meetings, networking opportunities and social events, many individuals in the gear industry were presented awards.
AGMA is looking to boost attendance at Gear Expo 2001 and the 2001 Fall Technical Meeting by "cross-pollinating" the two events.
Effective gear designs balance strength, durability, reliability, size, weight, and cost. Even effective designs, however, can have the possibility of gear cracks due to fatigue. In addition, truly robust designs consider not only crack initiation, but also crack propagation trajectories. As an example, crack trajectories that propagate through the gear tooth are the preferred mode of failure compared to propagation through the gear rim. Rim failure will lead to catastrophic events and should be avoided. Analysis tools that predict crack propagation paths can be a valuable aid to the designer to prevent such catastrophic failures.
What's new on the Gear Technology website this month? Videos from DMG Mori-Seiki, the latest e-mail newsletter and updates on upcoming events, including the Kapp-Niles Rocky Mountain Gear School.
The complete Calendar of events from the June/July 2013 issue of Gear Technology.
The complete Calendar of events from the August 2013 issue of Gear Technology.
Calendar of events.
In this special section, our editors have gathered recent news and information related to the heat treatment of gears. Here youâ€™ll find a comprehensive assortment of news and upcoming events that will help you understand the various heat treatment processes available for gears and choose the best option for your projects, whether you heat treat in-house or send your gears to a commercial heat treating provider.
Calendar of upcoming events.
This is a very exciting year for AGMA as the organization celebrates its 100-year anniversary. In addition to the anniversary, AGMA President Joe Franklin, jr., who has done an outstanding job at the helm of AGMA for the last 25 years, will retire, and we welcome in our new AGMA President, Matt Croson, who will lead us into the next 100 years. The centennial kicked off in October with a dinner at the AGMA Gear Expo in Detroit and will continue throughout 2016 with a number of exciting events scheduled to celebrate this milestone anniversary.
Calendar of events
Upcoming gear-related engineering and technical events.
This section is dedicated to what's new and what's happening in the world of gear inspection and metrology. Here you will find news about products, companies and organizations, services and events affecting the gear inspection and metrology industry.
Dear Editor, I am writing this in response to some articles appearing in your journal, but I want to take the opportunity, also, to express my thanks for all the good work your publication is doing. I always look forward to your next issue being in my mail slot. I know I will find timely technical articles relevant to our manufacturing situation here at Amarillo Gear Co., as well as thought provoking commentary on events and trends affecting our business. The Publisher's Page is always worth the reading.
Calendar of events from the July/August 2004 issue of Gear Technology.
I noted with interest the beginning of Gear Technology's three-part series on ISO 9000 certification. I also recently attended Brown & Sharpe's/Leitz gear metrology seminar. Both events caused me to smile and reflect.
Calendar of events from the March/April 2004 issue of Gear Technology.
Calendar of events from the May/June 2004 issue of Gear Technology.
Calendar of events from the January/February 2004 issue of Gear Technology.
The technical calendar of upcoming events from the July 2009 issue of Gear Technology.
In the past, the coffee breaks and dinner events at Sigma Poolâ€™s gear seminars have often triggered future process development and product improvements. This was still the case during the 2009 installment where customers and suppliers talked shop inside and outside the banquet hall on the new market and technology challenges currently facing the gear industry.
Calendar of events from the November/December 2004 issue of Gear Technology.
Upcoming conferences, trade shows and events from the July 2017 issue of Gear Technology.
The complete calendar of upcoming events from the September/October 2010 issue of Gear Technology.
A medieval philosopher once said that if he knew for certain the world was to end tomorrow, he would be sure to take time to plant an apple tree in his garden today. The recent events in the world financial capitals have seemed a bit like prior notice of something cataclysmic, but like the philosopher, we can still find some reasons for hope in the face of an uncertain future. The good news for our industry is that four important efforts on the part of various organizations promise to have long-term positive effects on both the gear and machine tool businesses.
Gear making and heat treating pair together like a fine cabernet and filet mignon. Now for the first time, the two industries are embracing this symbiotic relationship by co-locating their industry events this fall in Indianapolis. ASM Internationalâ€™s 2009 Heat Treating Society Conference and Exposition and Gear Technologyâ€™s favorite trade show, Gear Expo, are teaming up September 14â€“17 at the Indiana Convention Center in Indianapolis.
Gear-related events from SME, ASME and overseas organizers.
The search for greater gear life involves improvement in cost, weight and increased power output. There are many events that affect gear life, and this paper addresses those relating to fatigue, gear tooth pitting, fatigue strength losses due to the heat treating processes and shot peening technique. The capability of shot peening to increase fatigue strength and surface fatigue life eliminate machine marks which cause stress risers, and to aid in lubrication when properly controlled, suggests increased use and acceptance of the process.
Calendar of events from the September/October 2004 issue of Gear Technology.
The complete Calendar of Events from the November/December 2013 issue of Gear Technology.
Calendar of Upcoming Events
Peter Eelman has been involved with the International Manufacturing Technology Show for more than 30 years. First as an exhibitor with Warner & Swasey Co.; later with Toyoda USA; later still as a consultant; and currently as vice president for exhibitions and business development, IMTS. He also serves on the board of directors of the exhibitor-appointed Contractor Association and is a former member of the board of directors for the Trade Show Exhibitors Association. Eelman is a speaker with the International Association of Exhibitions and Events and serves on the Metropolitan Chicago Pier & Exposition Authority Labor Council. As the head of IMTS, Eelman is the go-to, make-things-happen guy for the Chicago Convention and Tourism Bureau, the Metropolitan Pier and Exposition Authority, McCormick Place and the various vendors, service providers and trade unions involved in the complex trade show process. In addition to IMTS, Eelman is also prominently involved in shows with an international presence.
Calendar of Events
Calendar of Events
Calendar of Events
Calendar of Events
Calendar of Events
Calendar of Events July/August 1989
Calendar of Events for the Industry
Events from SME and AGMA, along with news from the gear industry.
Calendar of Events
News Items About events
1 Hexagon Announces Two HxGN Events in September (September 6, 2019)
Hexagon's Manufacturing Intelligence division recently announced it will host two HxGN LIVE events during September in the U.S. Midwe... Read News
2 Nanol Lubricant Additive Prevents Hydrogen Embrittlement in Metals (June 12, 2017)
The Fraunhofer independent research institute has demonstrated that Nanol's lubricant additive has some completely new performance fe... Read News