gear expo 2009 - Search Results
Articles About gear expo 2009
Articles are sorted by RELEVANCE. Sort by Date.
Sure, Gear Expo undoubtedly has a ton to offer attendees in education, research and networking alone, but what really draws the crowd in are the physical products and technology on display from exhibitors. Otherwise it would just be another technical meeting or social receptionâ€”and AGMA could save a few bucks on space to say the least.
Details about the Solutions Center, SME and AGMA special events at the show.
Is economic relief on the way? This was the general consensus coming out of Indianapolis after Gear Expo 2009 closed its doors in September. Though the numbers were slightly downâ€”2,539 exhibitors and attendees compared to 2,992 in 2007â€”it appeared to be steady as she goes at the gear industryâ€™s biennial main event, good news considering the state of the gear industry since Gear Expo 2007 in Detroit.
Gear Expo floor map and alphabetical listing of exhibitors.
Let's face it. It's been a bummer of a summer economically speaking. Here's why you should still go to the show.
As Gear Expo 2009 approaches (Sept. 15â€“17), the show finds itself in an â€śIt was the best of times, it was the worst of timesâ€ť mindset.
When it came to picking a personal favorite booth at Gear Expo, AGMA Vice President of Marketing Jenny Blackford donned her proverbial TAG Heuer watch and embroidered silk apron and decided to keep her allegiance neutral.
For anyone involved in gear manufacturing, Gear Expo is an absolute treasure. In 2013, it was bigger and more varied than it's been in a decade. With 226 exhibitors covering every conceivable gear-related technology, Gear Expo offered visitors unparalleled opportunities to interview potential new suppliers.
The complete Industry News section from the October 2013 issue of Gear Technology.
If you havenâ€™t already done so, you should make plans to attend Gear Expo in September. Itâ€™s a unique and important show, and you should take advantage of it.
Our goal at Gear Technology for the past 31 years has been to bring you the best possible technical information about gear manufacturing. We serve as the industryâ€™s educational resource, explaining the technology not only so that you can understand it, but also so that you can make use of it in your gear-related business.
If only there were some source of endless knowledge, experience and wisdom to guide you through your gear-related problems. If only there were some philosopher on a mountaintop whose sole purpose was to bring enlightenment to your gear noise problems, to unravel the mysteries of profile shift, to provide insight to a critical gear manufacturing problem or to explain the meaning of life (gear life, that is).
Anyone even remotely involved with the gear industry knows that Gear Expo is B-I-G. Every two years, it is an invaluable opportunity for buyers, sellers and just-lookers to come together and glorify gearing.
When you look at the floor plan for the Cobo Center (Detroit, MI) from Oct. 20-22, the names on the lineup really shouldnâ€™t come as a great surprise.
Interviews with exhibitors at ASM's Heat Treat 2013 exposition, which is co-located with Gear Expo.
A look at Products being Presented at the Expo
Listing of Booths at Gear Expo 2015
Your guide to the booths at ASM's Heat Treat 2013 show.
Gear Expo 2013 product preview features a look at many of the key booths you won't want to miss.
Our special advertising section featuring exhibitors from Gear Expo and ASM Heat Treat 2013
Your guide to the exhibitors of Gear Expo 2013.
There are many benefits to attending Gear Expo, but if you're not taking advantage of the educational opportunities, you're missing out.
Like many of you in the gear industry, weâ€™ve been working extremely hard over the past few months getting ready for Gear Expo 2013, which takes place September 17-19 in Indianapolis.
We are well into an odd-number year, so it must be just about time for another Gear Expo. Indeed, the big show -- Gear Expo 2013 -- kicks off in Indianapolis at 9:00 a.m. Tuesday, September 17, wrapping up Thursday the 19th at 4:00 p.m. And whether you are exhibiting or attending, the bottom line is you are going -- a good thing for you, your company and the tightly knit U.S. gear industry.
It's nice to see old friends. It's also advantageous to make new ones. Gear Expo has always been a family reunion of sorts, but it's first and foremost an opportunity to show off the latest and greatest technologies that are impacting the gear industry today. With this in mind, Gear Technology recently spoke with those responsible for putting the Fall Technical Meeting (FTM) and Gear Expo 2013 together in Indianapolis.
It's an ideal time for a pilgrimage to AGMAâ€™s Fall Technical Meeting and Gear Expo, which take place in Indianapolis.
Over the past few months we've talked with a lot of gear manufacturers. Many of them tell us business is strong, while others are struggling with reduced demand. The difference between them isn't so much in the quality of their manufacturing operations, but rather trends in the end markets they serve.
Many people seem to be counting this year's Gear Expo in Nashville as a resounding success. There were 180 American and international exhibitors occupying over 50,000 square feet of exhibit space in the Nashville Convention Center, with total attendance of 2,700. This figure is dramatically down from past shows but that doesn't seem to be an issue with the show organizers. According to Kurt Medert, vice president of AGMA;s Administrative Division, even though attendance was off from the 1997 show, the exhibitors were pleased with the quality of the people who did come to the show. "This was an excellent show for us," said Marty Woodhouse, vice president of sales for Star Cutter Company and chairman of AGMA's Gear Expo committee. "Our customer base was there and they came to buy. It was very active."
We've contacted many of the gear industry's leading suppliers to find out what they'll be showing at Gear Expo 99. Booth numbers are current as of July 31, 1999, but they are subject to change. A current list of exhibitors and booth information is available at the AGMA Web site at www.agma.org.
Thousands of gear industry professionals will converge October 24-27 in Nashville, TN, for Gear Expo 99, the industry's biennial collection of the latest in gear manufacturing technology. With nearly 50,000 square feet of exhibit space sold more than two months in advance of the show, this year's Gear Expo will offer visitors more opportunity for supplier comparison than ever before. As of July 20, 166 suppliers of equipment, tooling, services and precision gear products were scheduled to participate, with as many as 20 additional booths yet to be sold, according to AGMA vice president and Gear Expo show manager Kurt Medert. The largest previous Gear Expo was held in 1997 in Detroit, with 43,100 square feet of exhibit space and 161 exhibitors.
Notes from Detroit...Overall, Gear Expo 97, the AGMA biennial trade show, was a success. While attendance may not have been what some people had hoped for, the quality of the attendees was high. Serious buyers came and brought their checkbooks.
How do we educate the next generation of gear industry employees, and how do we train the ones we already have?
There is so much more to Gear Expo than gears or the machinery that makes them. That's because it takes much, much more to make a finished gear than even the most sophisticated machine. And it is exhibitors who are part of the "much, much, more" that are addressed in this article.
Summer never lasts as long as you want it to. By the time you read this, you'll be well into the hazy, lazy days, and the season will be gone before you know it. That means you're running out of time to make plans to attend our industry's most important event. Of course, I'm talking about Gear Expo (October 24 - 26) and the AGMA Fall Technical Meeting (October 22 - 24), both of which will take place in Columbus, OH.
You have challenges. We all do. If your challenges are related to any aspect of gear design, manufacturing, inspection, heat treating or use, the solutions can be found at Motion + Power Technology Expo, which takes place October 15â€“17 in Detroit.
On behalf of the AGMA Board of Directors, Show Committee and our 123 exhibiting companies â€” thank you for supporting Motion + Power Technology Expo 2021 (MPT Expo).
At the recently held Motion+Power Technology Expo, we had the opportunity to sit down with a number of exhibitors to learn more about the latest in technology for the mechanical power transmission industry â€“ including gear manufacturing machine tools, workholding, inspection equipment and much more.
Increasing the power density of a gearbox is often a design engineerâ€™s primary goal.
Whatâ€™s New and Whatâ€™s Next at Motion + Power Technology Expo?
The Gear Industry â€” and companies from the entire power transmission supply chain â€” will gather in-person at Motion + Power Technology Expo 2021
The past year has been quite a wild ride for the world, and that includes the manufacturing economy. When COVID hit, every industry took its share of lumps. But for some time now, manufacturing industries have been charging forward.
Business travel is back, and if youâ€™re serious about impressing your customers, colleagues and co-workers, then you need to look the part.
Building Connections at MPT Expo.
COVID-19 has taken a huge toll on the world. It has affected â€” and continues to affect â€” virtually every aspect of life. But at least as far as the economy goes, the more people we talk to, and the more statistics we hear from reliable sources, the more we think maybe Bob Marley was onto something.
Map and listings of the ASM Heat Treat Expo 2019.
Find the exhibitors you want to visit at the first-ever Motion+Power Technology Expo (formerly Gear Expo).
When you go to MPT Expo, make sure to visit the exhibitors in our special advertising section!
AGMA Sets Up Shop in Living Laboratory of the Midwest. Columbus, Ohio recently surpassed Indianapolis as the second largest city in the Midwest behind Chicago, according to the United States Census Bureau. This could change come the 2020 census, but there's no denying Buckeye Nation is going places.
In addition to hundreds of relevant suppliers, Motion+Power Technology Expo (Oct. 15-17 in Detroit) also offers many opportunities for learning.
There have always been plenty of reasons to attend Gear Expo. For decades, itâ€™s been the best place to see all of the technology, vendors and solutions in the gear industry, all under one roof. Now that it's the Motion + Power Technology Expo, it's even more true.
As most of you know by now, the trade show formerly known as Gear Expo is now the Motion + Power Technology Expo. If you're a gear-industry veteran, you might be confused by this change. If you've been coming to the show for years - or exhibiting at it - you might even feel a little betrayed. But I'm here to tell you it's going to be alright.
Liebherr and Wenzel announce sales and service agreement; MPIF releases new powder metal standard; Gear Motions announces promotions; Profilator opens new factory and more gear industry news.
We've decided to install a man-cave at our office here at Randall Publications. Comfy chairs, surround sound, flat screen, the works. We're going all out, because we have some important watching to do. But before you get the wrong idea, we're not goofing off and binge-watching Stranger Things. No, we're watching Gear Technology TV.
This special edition of Product News includes highlights from Gear Expo 2017 of new products that caught the editors' eyes.
This special advertising section highlights exhibitors from Gear Expo 2017 and ASM Heat Treat 2017.
The latest technology on display in Columbus, OH. October 24-26.
Map and directory of Gear Expo 2017. Plan your visit with this handy guide.
Gear Expo 2017 is your best opportunity to expand your knowledge, get answers to your technical questions and solve your toughest manufacturing challenges. The reason is quite simple. Gear Expo provides you with the greatest collection of gear expertise, know-how and experience you can find.
Special Advertising Section featuring Gear Expo exhibitors.
When traveling about in search of gears and other adventures, wise explorers bring along as much important information as they can. In the interest of keeping our readers as well-informed as possible, we bring you the following collection of Important Facts About Motor City.
Economic times are good right now in America and in the gear industry. We're in the seventh year of an up cycle. The tough shake-outs of the 1980s and early 90s are over. Orders are up. Backlogs are at comfortable levels. We're looking at what promises to be the biggest, most successful trade show in the industry's history coming up in Detroit in October. The most pressing question on the immediate horizon seems to be "How long can the good times go on?"
Gear Expo '95, held in Indianapolis, November 12-15, 1995, closed to rave reviews from both the attenders and the exhibitors. Traffic for the show was well up from 1993, with a total of about 4,000 visitors during the 3 1/2 day exhibition. One hundred thirty-two companies from all over the U.S. and as far away as India and The People's Republic of China displayed their wares.
Below are listed the Gear Technology advertisers exhibiting at Gear Expo 97.
The general impressionâ€”whether encouraged by AGMA or developed anecdotallyâ€”is that Gear Expo 2007 was a reasonableâ€”though certainly relativeâ€”success
Our special Gear Expo advertising section.
What's not to like about a more focused, user-friendly Gear Expo? Booth Previews.
Gear Expo 2011 may well be a special event. Interviews with show organizers.
A special edition of Help Wanted classified ads takes over the publisher's page.
AGMA president Joe T. Franklin Jr. talks about how the AGMA Gear Expo has grown and changed since its beginnings as a table-top show in 1987.
Easily one of the central issues affecting U.S. manufacturing is what one might call the exports deficitâ€”the inability of American companies to sell products to, for instance, Asian markets, developing countries and other ports of callâ€”due to what they perceive to be unfair trade agreements and or policies.
If you read the press clippings (even our own), and listen to the comments of many of the major exhibitors, you'll hear that Gear Expo 2005 was a resounding success.
Booth Listings for Gear Expo 2005 in Detroit.
Preview of Gear Expo, with information on AGMA's fall technical meeting and the city of Detroit.
The following letters were written in response to the Publisher's Page editorial, "Is Gear Expo Worth It?" which appeared in the November/December 2005 issue.
Readers respond to last issue's Publisher's Page, in which Michael Goldstein asked, "Is Gear Expo Worth It?"
Letters from readers in response to past issues...
Don't miss Gear Technology's booth #1337 at this year's Gear Expo in Cincinnati.
[special advertising section]
In 2005, Gear Expo debuted its first Solutions Center, a forum that features short exhibitor presentations on gear-related topics. This year, AGMA says the Solutions Center will return with a slightly different format.
"Eighty percent of success is showing up" -- Woody Allen
Map of the show and booth listings.
Maybe you don't have time. If not, send someone else.
Listing of papers to be presented and activities for the 2007 AGMA Fall Technical Meeting.
The organizers of Gear Expo 2007 promise to combine the most popular features of shows past with some innovations for this yearâ€™s attendees. By the time the show closes on October 10, the association hopes its targeted 175 exhibitors walk away with new insights leading to profitability and renewed contacts.
Gear making and heat treating pair together like a fine cabernet and filet mignon. Now for the first time, the two industries are embracing this symbiotic relationship by co-locating their industry events this fall in Indianapolis. ASM Internationalâ€™s 2009 Heat Treating Society Conference and Exposition and Gear Technologyâ€™s favorite trade show, Gear Expo, are teaming up September 14â€“17 at the Indiana Convention Center in Indianapolis.
"One of the reasons AGMA has been successful over our 93-year history is that the associationâ€™s agenda, programs and activities reflect the voices of our members," says Joe T. Franklin, Jr., AGMA President.
Where were you? We were hoping to see you here at Gear Expo. We were surprised that you didn't make it. Anyway, we had a really good show, along with more than a hundred other leading companies in the gear industry who exhibited this year.
The 17-year cicadas created quite a buzz in the Chicagoland area this June. Will Gear Expo 2007 create the same kind of buzz in the gear industry?
Co-located ASM and AGMA shows are a hot ticket.
Your guide to Gear Expo 2011, with highlighted map and alphabetical listings of exhibitors.
"A Decade of Performance" is the theme of the American Gear Manufacturers Association Gear Expo 97, to be held October 19-22 at Detroit's Cobo Hall. Products and services related to every aspect of the gear manufacturing process, from turning and grinding the blanks to coating and inspection of the gears,will be represented at the show.
"Opportunity is the start of great enterprises." said the Greet statesman Demosthenes, and what was true 2300 years ago is no less true now. Plenty of opportunities which can grow into great - and successful - enterprises are waiting for us right now if we only have the foresight to take advantage of them.
Indianapolis is a nice city. No. It's a great city for a convention. The facilities and the city are modern, clean and bright. The Convention Center is easy to get to by either car or plane, and its central location in the heart of town and the enclosed skyway system between it and major hotels put visitors close to amenities like restaurants, shopping and entertainment. The people are friendly and go out of their way to make visitors feel welcome.
Trade shows can be exhausting. You work hard all day, meeting people, wheeling and dealing, walking the aisles. After a long day of working the show, sometimes you just need to relax for awhile. With Gear Expo '95 fast approaching. Gear Technology has gone ahead and done some of the legwork for you. We've come up with some placed to go and things to do that have absolutely nothing to do with gears.
Gear Expo '95, scheduled for November 12-15 at the Indiana Convention center in Indianapolis, IN, will attract more exhibitors from a wider array of industries than any previous show, according to the show's sponsor, the American Gear Manufacturers Association.
Putting one's best foot forward is important for successful business communication. And successful business people know the "rule" of the game, what it say and do in business situations, to make the best impression. However, these rules change from country to country, and what is appropriate behavior here may appear rude to someone from Latin America, Europe or Asia To help you become more familiar with some of the different rules of engagement in other countries, Gear Technology spoke with three businessmen who have had extensive contact in various part of the world.
Forty of Gear Technology's pre-show and show issue advertisers will be exhibiting a wide range of goods and services at AGMA's Gear Expo '93. The exhibition will be held October 10-13 at Cobo Conference & Exhibition Center in Detroit, MI. Below is an alphabetical listing of these advertisers and a preview of what can be seen at their booths.
Gear Expo '93 - another trade show, another plea to send people and/or equipment out of town, away from the office or plant. Another bid to spend time, money, and effort. Oh, please! Hasn't anybody heard that these are the "lean and mean" '90s?
Gear Expo '93, "The World of Gearing," is scheduled for October 10-13 at Cobo Conference & Exhibition Center, Detroit, MI. Hours are 9 a.m. to 5 p.m. on all four days of the show.
AGMA's Gear Expo '93 is expected to be at least 10% larger in terms of floor space than the '91 show, according to Joe Franklin, AGMA's executive director. "As of June 1, we have 80 exhibitors registered", he says.
The object of any business transaction, be it foreign or domestic, is making a profit. That's why you go through all the effort of making and selling your product in the first place. Getting paid in a timely manner is crucial to making profit, but when your customer is in another country, this "timely and convenient" payment can become complicated; hence, your need for a banker with expertise in international markets.
One of the key questions to be answered when exporting is how you are going to get your product to your customer. All the time, effort, and money you've spent to make a sale in the first place can be wasted if the shipment is late, damaged, or lost, or if delivery becomes an expensive bureaucratic nightmare for either you or the buyer.
Exporting. It's one of the hot strategies for helping boost businesses of all kinds, gear manufacturing among them. With domestic markets tight and new markets opening up overseas, exporting seems like a reasonable tactic. But while the pressure is on to sell overseas, there is equal, justifiable concern about whether the move is a good one. Horror stories abound about foreign restrictions, bureaucratic snafus, carloads of paperwork, and the complications and nuances of doing business in other languages and with other cultures.
October is the time. Detroit is the place. AGMA Gear Expo '91 is the event. Cobo Center in downtown Detroit is where you will want to be in October if you have any interest in gear products, manufacturing, or research.
Use this guide to plan your trip to Gear Expo 2011.
AGMA's Gear Expo '91, "The World of Gearing," opens Oct. 20-23 at Cobo Conference & Exhibition Center, Detroit, MI. Gear Expo '91 will provide 35,000 square feet of exhibits by 91 companies from around the world.
AGMA's Gear Expo '91, "The World of Gearing," opens October 20 and runs through October 23 at the Cobo Conference & Exhibition Center in "The Heart of the Manufacturing Industry," Detroit, MI. Gear Expo '91 is "the largest trade show ever specifically organized for the gear industry," according to Rich Norment, AGMA's Executive Director.
A medieval philosopher once said that if he knew for certain the world was to end tomorrow, he would be sure to take time to plant an apple tree in his garden today. The recent events in the world financial capitals have seemed a bit like prior notice of something cataclysmic, but like the philosopher, we can still find some reasons for hope in the face of an uncertain future. The good news for our industry is that four important efforts on the part of various organizations promise to have long-term positive effects on both the gear and machine tool businesses.
It is with great anticipation that we move closer to AGMA's Fall Technical Conference and Gear Expo '87, which is being held on Oct. 4-6 in Cincinnati, OH. This bold undertaking by both AGMA and the exhibitors in the Expo's 160 booths is an attempt to make a major change in the industry's approach to the exposition of gear manufacturing equipment. By combining the Expo with the Fall Technical Conference, those involved in gear manufacturing will have the opportunity to review the latest equipment, trends, and most innovative ideas, while keeping up with the newest technology in the industry.
For the last few years, the market has been tough for the U.S. gear industry. That statement will cause no one any surprise. The debate is about what to do. One sure sign of this is the enormous attention Congress and the federal government are now placing on "competitiveness."
A change has taken place within the industry that is going to have an enormous effect on the marketing, sales, and purchasing of gear manufacturing and related equipment. This change was the American Gear Manufacturers' Association, first biennial combination technical conference and machine tool minishow.
I came back from Gear Expo in a pretty good mood, and judging by the smiles on the faces of exhibitors I saw, I'm not alone. In fact, the mood at Gear Expo 2011 was the best I've seen in recent memory.
Here are some of the new products and technologies available to attendees at Heat Treat 2011.
Map and listings to the ASM Heat Treating Society Conference and Exposition, which is co-located with this year's Gear Expo.
Our special advertising section brings you the highlights of Gear Expo 2011.
Let's take a look at Cincinnati -- Henry Longfellow's "Queen of the West" and Ohio's third-largest city.
There will be plenty of time to talk shop, learn about the latest educational and research endeavors and network with peers. But the real reason the gear industry comes together every two years is to see all the new products and technology offerings.
Compass Automation unveiled its Robotic Deburring System at Gear Expo 2009.