green - Search Results

Articles About green

Articles are sorted by RELEVANCE. Sort by Date.

1 Green Heat Treating - No Sweat (November/December 2009)

Bob McCulley of Comprehensive Heat Treat Specialists describes how even the most energy intensive industrial processes can be made "green."

2 The Business of Going Green (August 2008)

Heat treatment industry reinforces environmental/energy conservation.

3 Green Gravy (January/February 2009)

Step right up! Get your U.S. government gravy here! We’re the U.S. Treasury Department’s Troubled Asset Relief Program, and we’re printing money like we’re—well—the U.S. reasury. If you’ve got trouble, then get your assets in line!

4 Greener Gears (July/August 2004)

Companies around the world are learning to embrace the environment, and the gear industry is no exception. This special section takes a look at how some gear manufacturers are doing their part to conserve resources, preserve and protect the environment, and give back to the land. What we’ve found is that adopting environmental measures is far more than just good corporate citizenship. For many gear industry companies, good environmental practices also turn out to be good for the bottom line.

5 The Changing Industrial Landscape (March/April 2009)

Companies weigh in on green technology and sustainable efforts.

6 New Transmissions Make the Gas GREENER (July 2015)

“Highway vehicles release about 1.7 billion tons of greenhouse gases (GHGs) into the atmosphere each year — mostly in the form of carbon dioxide (CO2) — contributing to global climate change. The CO2 emissions of a car are directly proportional to the quantity of fuel consumed by an engine. In 2013, U.S. greenhouse gas emissions from transportation were second only to the electricity sector — an increase of about 16% since 1990.” (EPA.GOV).

7 Hotter, Faster, Harder Cutting (July/August 1995)

What Is Whisker-Reinforced Ceramic? Whisker-reinforced ceramic as applied to cutting tool inserts comprises a matrix of aluminum oxide into which approximately 50% by volume of high-purity silicon carbide "whiskers" are randomly dispersed. The "whiskers" are, in fact, single crystals having dimensions of approximately 0.6 microns in diameter x 10-80 microns in length. These "whiskers" have a tensile strength on the order of 1,000,000 psi (690 MPa). The composite material that is the best known and most widely applied using this technology is designated WG-300 and manufactured by the Greenleaf Corporation of Saegertown, PA.

8 Deburring & Finishing Gears with Power Brushes (March/April 1989)

Why Brushes? In this age of hi-tech, robots, automatic machines, machining cells, etc., is there a niche somewhere for power brushes? Let me answer by asking another question. What tool does the gear manufacturer have in his arsenal that allows him to deburr green gears, hardened gears, hobbed gears, ground gears and shaved gears? What tool allows him to deburr powder metal gears - green and sintered - brass gears, bronze gears, stainless gears made of exotic materials such as inconel, waspaloy, or hastaloy, and fiber and plastic gears? How about spur gears, helical gears, sprockets, both internal and external splines, clutch teeth and pump gears?

9 Light Weight Assembled Gears - A Green Design Solution (May 2013)

It is widely recognized that the reduction of CO2 requires consistent light-weight design of the entire vehicle. Likewise, the trend towards electric cars requires light-weight design to compensate for the additional weight of battery systems. The need for weight reduction is also present regarding vehicle transmissions. Besides the design of the gearbox housing, rotating masses such as gear wheels and shafts have a significant impact on fuel consumption. The current technology shows little potential of gear weight reduction due to the trade-off between mass optimization and the manufacturing process. Gears are usually forged followed or not by teeth cutting operation.

10 Greenhouse of the Gear Industry (May 2011)

Publisher Michael Goldstein talks about how one gear company is encouraging young people in manufacturing. What are you doing?

11 Gear Greenbacks (September/October 2004)

Imagine the $10 bill with the face of Edwin R. Fellows on it and on the back, a picture of his invention: the gear shaping machine. Or the $5 bill with George B. Grant and a picture of the first hobbing machine, which he built.

12 Gearbox Speed Reducer Helps Fan Technology for "Greener" Jet Fuel Efficiency (August 2008)

Today’s ever-evolving global economic engine is, in many ways, a wonderful phenomenon; you know—a rising-tide-lifting-all-boats, trickle-down-theory-of-economics dynamic at work.

13 Magnetic Gearing Attracting More Followers (August 2013)

"Going green" and energy efficiency are goals that all industries -- especially in Europe and the United States -- are working on, in such sectors as electric motors, lubrication, gears and on and on. Drumroll here please for magnetic gearing

14 Seven Ingredients (August 2016)

Chicagoans are very particular about their hot dogs. To begin with, it has to be an all-beef product, served on a steamed poppy seed bun. But just as important are the essential toppings. If you walk into a proper Chicago hot dog stand and order it “Chicago Style,” you’ll get exactly these seven ingredients on your dog: yellow mustard, chopped white onions, neon green pickle relish, a dill pickle spear, tomato wedges, sport peppers and, of course, celery salt.

15 Gone Fishin' - Back After Gear Expo (September/October 2001)

It's summertime in the gear industry. Out my window, I see blue skies, green grass and trees swaying in the wind. In the background, I hear crickets chirping.

16 Hard Finishing and Fine Finishing Part 1 (September/October 1989)

Profitable hard machining of tooth flanks in mass production has now become possible thanks to a number of newly developed production methods. As used so far, the advantages of hard machining over green shaving or rolling are the elaborately modified tooth flanks are produced with a scatter of close manufacturing tolerances. Apart from an increase of load capacity, the chief aim is to solve the complex problem of reducing the noise generation by load-conditioned kinematic modifications of the tooth mesh. In Part II, we shall deal with operating sequences and machining results and with gear noise problems.

17 Gear Finishing by Shaving, Rolling and Honing, Part I (March/April 1992)

There are several methods available for improving the quality of spur and helical gears following the standard roughing operations of hobbing or shaping. Rotary gear shaving and roll-finishing are done in the green or soft state prior to heat treating.

18 An Innovative Way of Designing Gear Hobbing Processes (May 2012)

In today’s manufacturing environment, shorter and more efficient product development has become the norm. It is therefore important to consider every detail of the development process, with a particular emphasis on design. For green machining of gears, the most productive and important process is hobbing. In order to analyze process design for this paper, a manufacturing simulation was developed capable of calculating chip geometries and process forces based on different models. As an important tool for manufacturing technology engineers, an economic feasibility analysis is implemented as well. The aim of this paper is to show how an efficient process design—as well as an efficient process—can be designed.

19 New Update of an Old Standard (July/August 1997)

Machinery's Handbook 25 by Erik Oberg, Franklin D. Jones, Holbrook L. Horton & Henry H. Ryffel, Reobert E. Green, ed., Industrial Press Inc., New York, NY, 1996 ISBA 0-8311-2424-5, $75.00 (Large Print Version, $95.00).

20 It's No American Dream: Pratt & Whitney GTF Engine Now a Reality... (November/December 2011)

In the August 2008 issue of Gear Technology, we ran a story (“Gearbox Speed Reducer Helps Fan Technology for ‘Greener” Jet Fuel Efficiency’) on the then ongoing, extremely challenging and protracted development of Pratt & Whitney’s geared turbofan (GTF) jet engine.

News Items About green

1 Hannover 2012 Centers on Green Technologies (January 5, 2012)
By adopting "greentelligence" as its keynote theme, Hannover Messe 2012 has put the spotlight squarely on green technologies as... Read News

2 Solar Atmospheres Greenville Nadcap Approved for Vacuum Furnace Brazing (November 6, 2017)
Solar Atmospheres Greenville, SC facility has for the second successive year expanded its scope of Nadcap approval: this time to include ... Read News

3 Solar Atmospheres Expands Scope of Boeing Approval at Greenville Facility (November 27, 2017)
Solar Atmospheres announced the expansion to its current scope of Boeing approval at its Greenville, South Carolina facility to include t... Read News

4 Mahr Inc. Hires Brett Green as Vice President Sales Americas (December 22, 2017)
Brett Green has joined Mahr Inc. as Vice President Sales Americas. Green's responsibilities include overall management of the America... Read News