hexagon manufacturing intelligence - Search Results

Articles About hexagon manufacturing intelligence


Articles are sorted by RELEVANCE. Sort by Date.

1 Product News (January/February 2016)

Latest news about the Latest Products

2 Measurement Management (July 2019)

The secret to meeting today's inspection demands is influenced by the technology and those in charge of operating it.

3 Industry News (July 2019)

The complete Industry News section from the July 2019 issue of Gear Technology.

4 Industry News (November/December 2017)

Gear Technology hosts dinner for technical contributors to the gear industry during this year's AGMA Fall Technical Meeting and Gear Expo in Columbus, OH. Plus other news from around the industry.

5 Product News (September/October 2014)

The complete product news section from the September / October 2014 Issue Gear Technology.

6 Industry News (September/October 2016)

News From Around the Gear Industry

7 Product News (January/February 2014)

The complete Product News section from the January/February 2014 issue of Gear Technology.

8 Design of a Flexible and Lean Machining Cell, Part I (June/July 2013)

Although a cell is dedicated to produce a single part family, it must have the requisite equipment capabilities, routing flexibility, cross-trained employees and, to the extent possible, minimal external process dependencies. Cells are often implemented in job shops since they provide the operational benefits of flowline production.

9 Gear Expo 2013 - An Oscar-Worthy Indy Production (August 2013)

We are well into an odd-number year, so it must be just about time for another Gear Expo. Indeed, the big show -- Gear Expo 2013 -- kicks off in Indianapolis at 9:00 a.m. Tuesday, September 17, wrapping up Thursday the 19th at 4:00 p.m. And whether you are exhibiting or attending, the bottom line is you are going -- a good thing for you, your company and the tightly knit U.S. gear industry.

10 Design of a Flexible and Lean Machining Cell, Part II (August 2013)

Job shops may be ill-advised to undertake a complete reorganization into FLEAN (Flexible and Lean) cells. A FLEAN cell would (i) be flex-ible enough to produce any and all orders for parts that belong in a specific part family and (ii) utilize lean to the maximum extent possible to eliminate waste.

11 Industry News (August 2013)

The complete Industry News section from the August 2013 issue of Gear Technology.

12 Things Are Heating Up in 2015 (March/April 2015)

In this special section, our editors have gathered recent news and information related to the heat treatment of gears. Here you’ll find a comprehensive assortment of news and upcoming events that will help you understand the various heat treatment processes available for gears and choose the best option for your projects, whether you heat treat in-house or send your gears to a commercial heat treating provider.

13 Letters to the Editor (September 2013)

Readers respond to our "Job Shop Lean" column and the "My Gear is Bigger than Your Gear" article.

14 Industry News (May 2013)

The complete Industry News section from the May 2013 issue of Gear Technology

15 Product News (September 2013)

The complete Product News section from the September 2013 issue of Gear Technology.

16 If You Rebuild It, They Will Buy It (May 2013)

It’s been said that the best ideas are often someone else's. But with rebuilt, retrofitted, re-controlled or remanufactured machine tools, buyer beware and hold onto your wallet. Sourcing re-work vendors and their services can require just as much homework, if not necessarily dollars, as with just-off-the-showroom-floor machines.

17 Product News (October 2013)

The complete Product News section from the October 2013 issue of Gear Technology.

18 Lean Resources (November/December 2013)

The final installment of our Job Shop Lean series includes a wide variety of educational resources to help you continue your own lean journey.

19 Industry News (August 2014)

The complete Industry News section from the August 2014 issue of Gear Technology.

20 Cracking the WIP (September/October 2014)

Over the past few months I've talked with several different gear manufacturers who are in the process of upgrading their gear making equipment with modern CNC machine tools. Each of these manufacturers has come to the realization that in order to stay competitive, he needs to streamline operations and become more efficient...

21 Industry News (January/February 2015)

News from around the Gear Industry

22 Product News (March/April 2015)

The complete Product News section from the March/April 2015 issue of Gear Technology.

23 Industry News (January/February 2016)

Latest new from the Gear Industry

24 Industry News (March/April 2015)

The complete Industry News section from the March/April 2015 issue of Gear Technology.

25 Can Lean Manufacturing Kill Your Job Shop (May 2017)

The presidents of two manufacturing companies were having a drink in the lobby before the start of their trade association's annual meeting...

26 Product News (March/April 2019)

The complete Product News section from the March/April 2019 issue of Gear Technology.

27 Simulation of Spiral Bevel Gear Tooth Manufacturing to Aid in One-Piece Gear Shaft Design (January/February 2019)

In helicopter applications, the two-piece gear is typically joined by welding, bolts, or splines. In the case of the U.S. Army CH-47D Chinook helicopter, a decision was made to eliminate these joints through the use of integral design. Integral shaft spiral bevel gears must be designed such that the shaft does not interfere with gear tooth cutting and grinding. This paper discusses techniques to iterate in the design stage before manufacturing begins.

28 Product News (March/April 2018)

New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.

29 Industry News (January/February 2018)

Fraunhofer CMI focuses on new U.S. gear and transmission technologies group, plus other news from around the industry.

30 Pardon the Disruption (January/February 2018)

Emerging technologies such as robotics/automation, new materials, additive manufacturing and IIoT can and will change the course of gear manufacturing for the foreseeable future.

31 There's a Story Here (January/February 2018)

As the founder, president and co-host of Manufacturing Talk Radio, as well as publisher of Metals & Manufacturing Outlook eZine, I am excited to report that the economic outlook for 2018 is just too good not to tout. Whatever "final GDP number" the government divines for 2017, the year will finish above 3% for the first time in a decade.

32 Product News (May 2017)

The latest from Liebherr, Gleason, Klingelnberg and more.

33 Product News (September/October 2015)

News about New Products

34 Industry News (January/February 2017)

News from around the Gear Industry

35 DIGITIZE or DIE (November/December 2016)

In a capitalist society, the way things usually work is that government and academia focus on research and development, while industry focuses on commercialization. The result is an increasingly wide disconnect in the applied research sector, which deals primarily with technology development and demonstration.

36 Show Stoppers (August 2016)

Our special advertising section featuring some of the premier gear industry suppliers at IMTS 2016.

37 Industry News (July 2016)

Latest News from around the industry

38 Taking on Tight Margins in Wind Energy (March/April 2016)

Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.

39 DFM Crucial for Gear Industry Success (March/April 2013)

"Design for manufacturability" (DFM) is a well-established practice, essential to realizing the successful transformation of concepts into mass-produced gears and motion control devices. And yet, all too often issues that could have been avoided are identified very late in the process that impact production costs and schedules. This suggests that key DFM principles are often underutilized in practice and are not applied consistently - or to the degree necessary - to avoid these negative results.

40 Job Shop Lean - Assembly (May 2013)

The Tiger Team from Hoerbiger looks for ways to cut waste and improve throughput in the company's assembly cell.

41 If Only We Had a Crystal Ball... (November/December 2012)

Before we get into projections and prognostications about the future, let’s take a minute to review 2012. For many in the gear industry, the year was better than expected. Some manufacturers had a very successful year leading up to an even more successful manufacturing trade show (IMTS 2012). Others were searching for more business, hoping that the general state of the economy wouldn’t make things worse. In some cases, it did.

42 Job Shop Lean (January/February 2013)

This is the first article in an eight-part "reality" series on implementing continuous improvement at Hoerbiger Corporation. Throughout 2013, Dr. Shahrukh Irani will report on his progress applying the job shop lean strategies he developed during his time at Ohio State University.

43 American Manufacturing - Can It Be Saved (November/December 2009)

If anyone should ever need convincing that the state of American manufacturing is in ongoing decline, consider this: the state of Michigan has the highest concentration of engineers in the country, yet also has the highest unemployment rate. But there are ripples of hope out there as grassroots and otherwise organized groups are fighting the good fight in an attempt to reverse that trend.

44 Product News (January/February 2009)

The complete product news section from the January/February 2009 issue of Gear Technology, featuring giant-sized David Brown girth gears, gear inspection up to 4.5 meters and the latest Gleason gear grinder.

45 An Emphasis on Accuracy (June/July 2011)

Meeting the many challenges of large gear inspection.

46 Product News (October 2012)

The complete Product News section from the October 2012 issue of Gear Technology.

47 Product News (March/April 2013)

The complete Product News section from the March/April 2013 issue of Gear Technology.

48 GT Extras (June/July 2013)

Video from Hexagon Metrology, Back-to-Basics archive, e-mail newsletter updates and what's happening on LinkedIn

49 Product News (June/July 2013)

The complete Product News section from the June/July 2013 issue of Gear Technology.

50 Product News (August 2013)

The complete Product News Section from the August 2013 issue of Gear Technology.

51 Product News (August 2014)

The complete Product News section from the August 2014 issue of Gear Technology.

52 Industry News (September/October 2014)

The complete Industry News section from the September / October 2014 issue of Gear Technology.

53 Product News (July 2017)

The complete Product News section from the July 2017 issue.

54 Industry News (July 2017)

AGMA adds two new committees, Star Cutter Celebrates 90 years, plus other news from around the industry.

55 Product News (August 2018)

The complete Product News section from the August 2018 issue of Gear Technology.

56 Industry News (November/December 2018)

The complete Industry News section from the November/December 2018 issue of Gear Technology.

57 Grinding Gears for Racing Transmissions (September/October 2009)

When you push 850 horsepower and 9,000 rpm through a racing transmission, you better hope it stands up. Transmission cases and gears strewn all over the racetrack do nothing to enhance your standing, nor that of your transmission supplier.

58 Steadfast and Streamlined: Can Lean Soften the Economic Blow (August 2009)

Two high-volume gear production cells grace the shop floor at Delta Research Corporation in Livonia, Michigan. Thanks to lean manufacturing, these cells have never shipped a defective part to a customer since they were developed over three years ago.

59 Product News (January/February 2013)

The complete Product News section from the January/February 2013 issue of Gear Technology.

60 The Winds of Change (January/February 1991)

Nashville - One of the highlights of this year's SME Advanced Gear Processing and Manufacturing Clinic was a tour of the new GM Saturn automobile manufacturing plant outside the city. There in the Tennessee hills is a hopeful vision of the future of the American automobile industry. It may well be the future of American large-scale manufacturing in general.

61 Industry News (November/December 2012)

The complete Industry News section from the November/December 2012 issue of Gear Technology.

62 Manufacturing and Pursuit of the American Dream: Reality or Fool's Quest (November/December 2012)

It wasn’t so very long ago that a high school-educated, able-bodied person with a will to work typically had little trouble finding a decent job in manufacturing. Whether at an area job shop, an OEM plant or auto plant—work was to be had. Work that paid well enough to marry, buy a home, feed, raise and educate a family—with even enough left over for a modest retirement pension.

63 A Quick-Start Approach for Implementing Lean in Job Shops (October 2012)

In the August issue, we examined the lean tools that will and will not work in high-mix, low-volume manufacturing facilities. Now, we will examine how to implement the tools that will work in the job shop with an approach that expands the capabilities of value stream mapping.

64 Adapting Lean for High-Mix, Low-Volume Manufacturing Facilities (August 2012)

Why traditional lean manufacturing approaches need to be adapted for job shop environments.

65 Gear Teeth With Byte (January/February 1998)

Computers are everywhere. It's gotten so that it's hard to find an employee who isn't using one in the course of his or her day - whether he be CEO or salesman, engineer or machinist. Everywhere you look, you find the familiar neutral-colored boxes and bright glowing screens. And despite the gear industry's traditional reluctance to embrace new technology, more and moe of what you find on those screens are gears.

66 Investing in Ourselves is the Key to Revitalizing American Manufacturing (July/August 1992)

Popular wisdom has it that manufacturing in the United States is no longer a viable entity. We are told that quality is poor, skilled labor is difficult to obtain, if not impossible, demand is low, and the government is helping to discourage business. So what should we do, give up?

67 A Second Rate Society - Never (August/September 1984)

What was once recognized as the unique genius of America is now slipping away from us and, in many areas, is now seen as a "second rate" capability. Unless action is taken now, this country is in real danger of being unable to regain its supremacy in technological development and economic vigor. First Americans must understand the serious implications of the problem; and second, we must dedicate ourselves to national and local actions that will ensure a greater scientific and technological literacy in America.

68 Gear Manufacturing in the Far East (January/February 2006)

This article gives readers a glimpse of some companies that manufacture gears in the Far East. We've talked with more than a dozen companies in India, Taiwan and Korea...

69 Real-World Job Training the Lean Way -- And Loving It (September 2011)

Make no mistake -- lean manufacturing is here to stay. And no wonder. As a fiercely competitive global economy continues to alter companies’ “Main Street” thinking, that relatively new dynamic is spurring the need for “I-need-it-yesterday” production output. And for increasingly more industries -- big or small -- that means getting as lean as you can, as fast as you can.

70 The Global Gear Industry - Insights, Projections, Facts and Figures (May 2011)

A series of short reports on global manufacturing growth and the gear industry's role.

71 Protecting Our Own (January/February 2011)

Publisher Michael Goldstein discusses the loss of U.S. manufacturing capability and what we should do about it.

72 Where Are We Now (January/February 2010)

The struggles of the manufacturing economy in 2009 are well documented. Even among those of us with long careers, most of us have never seen activity come to a screeching halt the way it did last year. 2009 was tough on all of us. So, what should we expect in 2010?

73 A Lean Strategy for Job Shops (November/December 2005)

POLCA: An alternative to Kanban for high-variety or custom-engineered products.

74 Medical Device Manufacturing Keeps Gear Industry Healthy (March/April 2006)

When Forest City Gear started manufacturing gears for medical components in the 1980s, it was a minuscule part of the company's business. Today, the medical device industry represents 18-20%.

75 Industry News (March/April 2019)

The complete Industry News section from the March/April 2019 issue of Gear Technology.

News Items About hexagon manufacturing intelligence

1 Hexagon Manufacturing Intelligence Global S CMM Features Four Different Capability Packages (February 19, 2018)
Hexagon Manufacturing Intelligence announced the latest evolution of its Global S coordinate measuring machine (CMM) series, customizable... Read News

2 Hexagon Manufacturing Intelligence Leica Absolute Scanner LAS Line Expanded with Portable XL Size Scanner (January 2, 2018)
Hexagon Manufacturing Intelligence announced the Leica Absolute Scanner LAS-XL, a new ultra-large scale portable laser scanner. Designed ... Read News

3 Hexagon Manufacturing Intelligence Donates ROMER Absolute Arms to Workshops for Warriors' Metrology Program (December 20, 2017)
Hexagon Manufacturing Intelligence announced its support for Workshops for Warriors (WFW), a non-profit school created to train military ... Read News

4 IMTS Preview: Hexagon Manufacturing Intelligence (August 10, 2016)
Hexagon Manufacturing Intelligence North America announced that its Integrated Solutions Business group will unveil a new-to-the-market a... Read News