kisssoft - Search Results

Articles About kisssoft

Articles are sorted by RELEVANCE. Sort by Date.

1 KISSsoft Update Integrates Parasolid CAD Core (May 2010)

The machine element package by KISSsoft for the design and optimization of components like gears, shafts, bearings and others is now available in the new version 04/2010.

2 KISSsoft Introduces New Features with Latest Release (September/October 2010)

Tooth contact under load is an important verification of the real contact conditions of a gear pair and an important add-on to the strength calculation according to standards such as ISO, AGMA or DIN. The contact analysis simulates the meshing of the two flanks over the complete meshing cycle and is therefore able to consider individual modifications on the flank at each meshing position.

3 Product News - Gear Expo 2017 (November/December 2017)

This special edition of Product News includes highlights from Gear Expo 2017 of new products that caught the editors' eyes.

4 Helping Software Developers Help You (November/December 2017)

A key part of gear design software development is customer feedback. With the right feedback, you can get your software developer to work for you to provide the most relevant features possible.

5 Reliability, Lifetime and Safety Factors (March/April 2018)

A discussion of ISO and AGMA standards for gears, shafts and bearings, and the art of designing a gearbox that meets your requirements.

6 Calculated Gear Life Values (May 2018)

I have a query (regarding) calculated gear life values. I would like to understand for what % of gear failures the calculated life is valid? Is it 1-in-100 (1% failure, 99% reliability) or 1-in-one-thousand (0.1% failure)?

7 Shake, Rattle and Roll (June 2018)

Software Providers Examine the Dynamic Behavior of Gear Noise.

8 Product News (August 2018)

The complete Product News section from the August 2018 issue of Gear Technology.

9 Product News (January/February 2019)

The complete Product News section from the January/February issue of Gear Technology.

10 Product News (May 2019)

The complete Product News section from the May 2019 issue of Gear Technology.

11 The Measure of a Gear (July 2019)

Plastic gears still have an entire frontier to explore, and how they measure up against their steel cousins is a question still being investigated.

12 Product News (August 2019)

The complete Product News section from the August 2019 issue of Gear Technology.

13 Product News (November/December 2019)

The complete Product News section from the November/December 2019 issue of Gear Technology.

14 Industry News (May 2020)

The complete Industry News section from the May 2020 issue of Gear Technology.

15 Sizing of Profile Modifications for Asymmetric Gears (September/October 2020)

Lately, the use of asymmetric gears in automotive and other applications is an upcoming trend, though few applications are known to have asymmetric teeth. However, an increased interest in asymmetric gears can be seen. Many companies have started to design and test such applications.

16 Product News (May 2021)

Gear-related new technology from Liquidtool Manager, Marposs, EDM Intelligent Solutions, Helios Gear Products, Kapp Niles Metrology and more.

17 Product News (July 2021)

Gear-related new technology from Norton Quantum Prime Grain, Danobat, Big Kaiser, Heidenhain and more.

18 Product News (August 2021)

Gear-related new technology from Klingelnberg, WFL, Junker, Schunk and more.

19 Product News (September/October 2021)

The complete Product News section from the September/October 2021 issue of Gear Technology.

20 Gear Expo 2017 and ASM Heat Treat 2017 Booth Previews (September/October 2017)

The latest technology on display in Columbus, OH. October 24-26.

21 Product News (September/October 2017)

Grinding fluids from Norton|Saint-Gobain, digital micrometer from Mahr, grinding centers from Haas Multigrind, updated software from KISSsoft.

22 Product News (July 2017)

The complete Product News section from the July 2017 issue.

23 Product News (January/February 2015)

Product news from the Gear Industry

24 Desktop Gear Engineering (May 2011)

An update on the latest gear design software from several vendors, plus what gear design engineers can expect next.

25 Product News (May 2013)

The complete Product News section from the May 2013 issue of Gear Technology.

26 Worn Gear Contact Analysis (June/July 2013)

How does one perform a contact analysis for worn gears? Our expert responds.

27 Product News (October 2013)

The complete Product News section from the October 2013 issue of Gear Technology.

28 30 Years of Calculation (June 2014)

Examining the history of software in mechanical engineering

29 Getting the Right Tools (September/October 2014)

So there is little chance that they need the same software to assist with their work. Gone are the days when companies wrote their own code and process engineers thumbed the same tattered reference book.

30 Product News (November/December 2014)

The complete Product News section from the November/December 2014 issue.

31 An Approach to Pairing Bevel Gears from Conventional Cutting Machine with Gears Produced on 5-Axis Milling Machine (June 2015)

Developed here is a new method to automatically find the optimal topological modification from the predetermined measurement grid points for bevel gears. Employing this method enables the duplication of any flank form of a bevel gear given by the measurement points and the creation of a 3-D model for CAM machining in a very short time. This method not only allows the user to model existing flank forms into 3-D models, but also can be applied for various other purposes, such as compensating for hardening distortions and manufacturing deviations which are very important issues but not yet solved in the practical milling process.

32 Testing 1-2-3 (June 2017)

Software updates for the gear industry. What's new and noteworthy in software applications in 2017?

33 Product News (June 2015)

Latest News about Gear Industry Products

34 Product News (September/October 2015)

News about New Products

35 Taking on Tight Margins in Wind Energy (March/April 2016)

Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.

36 Product news (August 2016)

News about the latest products in the industry.

37 Product News (September/October 2016)

News on the latest products in the industry.

38 Managing Shop Floor Data (September/October 2016)

There's no substitute for a good software package in gear manufacturing. It's a critical shop floor tool that provides practical engineering services that customers appreciate. When you're in the business of specifying and procuring high quality gears, the software needs to meet many objectives including the consideration of all tolerances of center distance, tooth thickness and tip diameters, root diameters, fillets, etc. It's also imperative that the software updates include the latest revisions to the gear standards being used in the industry.

39 Industry News (March/April 2017)

Educational initiatives, company news, acquisitions and people in the industry are all featured this issue.

40 Product News (January/February 2007)

The complete product news from January/February 2007, including items from SMT, Monnier+Zahner, Mahr Federal, ExxonMobil, KissSoft, Geartech, Midwest Motion, Adcole and Makino.

News Items About kisssoft

1 KISSsoft Presents Overview of Manufacturing Capabilities (November 29, 2021)
KISSsoft supports the user with numerous calculation and simulation options for work preparation in the manufacture as well as inspection... Read News

2 KISSsoft Releases New Version of Software (April 7, 2014)
On April 7th, the industrial fair in Hanover opens its doors. At the same time, the new version of KISSsoft 03/2014 will be released with a number of innovations that have been implemented... Read News

3 KISSsoft Wins Industry Award (May 1, 2013)
The Huber Verlag für Neue Medien GmbH awards the INDUSTRIEPREIS to companies with high economic, social, technological and environm... Read News

4 ISO Workgroup 13 Takes Place at KISSsoft AG (May 30, 2013)
The last meeting of the ISO Workgroup 13 on bevel gear calculation took place on the 23rd and 24th of May 2013 at the KISSsoft AG, in Swi... Read News

5 KISSsoft Extends Assistants (June 14, 2013)
In the KISSsoft Release 03/2013, the current KISSsys assistants were extended and furthermore a planet assistant was added. These assista... Read News

6 Gear Expo Preview: KISSsoft Booth 717 (August 9, 2013)
KISSsoft will be presenting the latest release of the software, Version 03/2013. The latest version of KISSsoft incorporates the newest a... Read News

7 KISSsoft Offers Configurable Manufacturing Drawings (August 28, 2013)
For all cylindrical gears, custom configurable manufacturing drawings are now available in KISSsoft (module ZPK). The toothing data and a... Read News

8 KISSsoft Offers Fine Sizing for Worm Wheels and Crossed Helical Gears (September 25, 2013)
For the calculation of worm wheels and crossed helical gears, fine sizing modules are now available (module ZD5 and ZE6). The KISSsoft fi... Read News

9 KISSsoft Extends Contact Analysis for Cylindrical Gears (October 9, 2013)
The contact analysis for cylindrical gears in KISSsoft (module ZA30) has been extended and improved. Experience gained from a comparison ... Read News

10 KISSsoft Offers Contact Patterns of Five-Axis Milled Gears (November 6, 2013)
The five-axis milling of gears is an established manufacturing process in the field of short run and replacement parts. This manufacturi... Read News

11 KISSsoft Offers Calculation of Cold-Wear (December 2, 2013)
Low-speed wear or cold-wear is a phenomenon that occurs with slow rotating and heavily loaded gears. In the process, the EHD lubricant fi... Read News

12 KISSsoft Offers Highlights to KISSsys (January 16, 2014)
KISSsys, KISSsoft‘s system add-on, enables you to model complete gear units and drive trains (module SYS). The "KISSsys assist... Read News

13 KISSsoft Releases 2014 Beta (January 22, 2014)
The KISSsoft 03/2014 Beta Version has now been released for a test run. The final release will be available from April 7th, 2014 - just i... Read News

14 KISSsoft Offers Standards in the Shaft Strength Calculation (February 27, 2014)
For an analytical strength assessement, in the first instance the currently valid standard has to be applied. Therefore, an essential tas... Read News

15 KISSsoft Offers Customized Software Options (March 13, 2014)
Simple and intuitive handling is the basis for comfortable and efficient work with a software. In KISSsoft, there are several possibilities... Read News

16 KISSsoft Stays Active in Various Committees (June 10, 2014)
For KISSsoft, calculation standards are naturally fundamental. Therefore, the KISSsoft company works actively in the standardization comm... Read News

17 KISSsoft Implements Marine Calculations (March 13, 2013)
Det Norske Veritas provides with the standard No. 41.2 "Calculation of gear rating for marine transmission" a widespread gear ... Read News

18 KISSsoft Adds Beveloid Gears Module (October 28, 2014)
Beveloid gears have their own new module in the KISSsoft system (module ZH1). Sizing and dimensioning of beveloid gears have been impleme... Read News

19 Extended Bolt Calculation in KISSsoft (November 10, 2014)
In the bolt calculation according to VDI 2230 (module SPK), additional strength classes for nuts have been implemented in KISSsoft. ... Read News

20 KISSsoft Adds KISSsys System (December 15, 2014)
KISSsys is a system add-on to KISSsoft, where complete transmissions and drive trains can be modeled (SYS module). The gearbox package GP... Read News

21 KISSsoft Explains Calculation of the Face Load Factor (March 11, 2015)
In the KHβ calculation, the manufacturing allowances are now considered using the combinations of (+/-) signs of fma and fhb (module... Read News

22 KISSsoft Unveils Latest Software at Hannover Messe (April 17, 2015)
KISSsoft recently introduced its new version of KISSsoft 03/2015 at Hannover Messe on April 13. The new version was released with a ... Read News

23 KISSsoft Adds Flank Fracture Calculation to Latest Release (May 20, 2015)
The flank fracture calculation according to ISO/DTR 19042 was recently added to the latest KISSsoft release 03/2015 (module ZZ4). This ty... Read News

24 KISSsoft Offers Enhanced Heating Calculation for Gearboxes (September 3, 2015)
The efficiency calculation and thermal analysis according to ISO/TR 14179 (module KS2) has been extended with several useful functionalit... Read News

25 New KISSsoft Feature Considers Compliance and Influence on Load Distribution in the Gearbox (November 4, 2015)
In the static system analysis, a new feature considers housing compliance and influence on load distribution in the gearbox as well as lo... Read News

26 KISSsoft Offers New Shaft Calculation Features (December 10, 2015)
The shaft strength calculation method according to AGMA 6101-E08/6001-E08 is now available, and includes both a static and dynamic proof.... Read News

27 KISSsoft Introduces Custom Options (January 27, 2016)
In KISSsoft, users can design databases, report templates, lists of cutters, display results, and even customize the user interface in ac... Read News

28 KISSsoft Releases 03-2016 Beta Version (February 12, 2016)
The KISSsoft 03/2016 Beta Version has now been released for a test run. The final release will be available from April 25th, 2016 - just ... Read News

29 KISSsoft Offers Gearbox Calculation Courses (February 26, 2016)
KISSsoft software includes internationally recognized calculation standards and various design and optimization options, based on the exp... Read News

30 KISSsoft USA Hires Engineering Manager (March 8, 2016)
KISSsoft USA, LLC recently announced that Ty Warner has joined the company as engineering manager. Warner is a licensed professional engi... Read News

31 KISSsoft Offers Strength Analysis for Cylindrical Gears (March 24, 2016)
The strength calculation method specified in Lloyd's Register:2013 has now been implemented. This specific standard for ships is now ... Read News

32 KISSsoft Releases Latest Software Update (April 16, 2013)
KISSsoft is a modular calculation system for the verification, optimization, and sizing, of machine elements. The scope of the applicatio... Read News

33 KISSsoft Releases Software Beta (February 11, 2013)
The KISSsoft 03/2013 Beta Version has now been released for a test run. The final release will be available from April 8th, 2013 - just i... Read News

34 KISSsoft and SKF Collaborate on Rolling Bearings Data (May 24, 2016)
The new version of KISSsoft 03/2016 now contains the very latest data from the "Rolling Bearings" catalog. By cooperation betwe... Read News

35 Sintered Materials Available in KISSsoft (June 22, 2011)
The Swedish company Höganäs AB provided the KISSsoft calculation program with SN-curves for tooth bending of sintered material ... Read News

36 KISSsoft AG Moves to New Facility (January 27, 2006)
KISSsoft AG has moved their facilities to a new location. New contact information is: Main office number +41-55-254-20-30 Hotline:... Read News

37 Kisssoft Releases Synchronization Procedures for KISSsys (March 10, 2010)
Conventional vehicle gearboxes include a gear shifting mechanism that can be constructed with several different methods (sliding gears, c... Read News

38 KISSsoft Update Integrates Parasolid CAD Core (April 26, 2010)
The machine element package by KISSsoft for the design and optimization of components like gears, shafts, bearings and others is now avai... Read News

39 KISSsoft Releases Newest Version of ISO/CD TR 15144 (May 12, 2010)
In the hitherto existing draft ISO/CD TR 6336-7, the information for the definition of the permissible specific lubri... Read News

40 KISSsoft Releases New Function for Face Gears (September 9, 2010)
A new functionality to generate a solid model of a face gear with arbitrary shaft angle and offset is implemented in the development vers... Read News

41 KISSsoft Implements Spline Connections (October 26, 2010)
Due to numerous requests from the industry, the spline connections according to DIN 5481 and DIN 5482 were recently implemented in K... Read News

42 KISSsoft Software Tested at TC60/WG15 Meeting (November 23, 2010)
A recent meeting of the workgroup TC60/WG15 took place considering the ISO Technical Report ISO TR 15144-the calculation of risk regardin... Read News

43 KISSsoft Releases First iPhone App (January 18, 2011)
KISSsoft recently announced that its first free iPhone app, Hardness Conversion, is now available. This iPhone application easily&nb... Read News

44 KISSsoft Releases Calculation for Shearing Strength for Plastic Worm Wheels (February 17, 2011)
For crossed axis helical gear designs where a worm meshes with a cylindrical worm wheel made of plasti... Read News

45 Compression Spring Relaxation Available for KISSsoft (March 11, 2011)
The phenomenon of relaxation occurs in constant static loads of springs, which finally lead to time-dependent changes of t... Read News

46 KISSsoft Releases 03/2011 Update (April 7, 2011)
KISSsoft recently announced the release of its latest software update, KISSsoft 03/2011. Highlights for this update include accurate 3-D ... Read News

47 KISSsoft Releases Sabic Data (May 5, 2011)
In the current KISSsoft Release 03/2011, two additional new data sets for plastic materials from Sabic are available: VERTON RVL36 now wi... Read News

48 Kisssoft Calculates Flank Breakage (May 20, 2011)
The flank breakage of gears is a failure mode that is separate from the damage forms such as root breaking or pitting. Consequently, it a... Read News

49 KISSsoft Updates Features in the Contact Analysis (July 13, 2011)
In the contact analysis of KISSsoft, the effects of shaft deformations may now be precisely evaluated (module ZA30). The results of shaft... Read News

50 KISSsoft Welcomes MSC Software as Technology Partner (February 1, 2013)
KISSsoft recently announced that it will be MSC Software's first Technology Partner with a connection to the new Adams/Machinery prod... Read News

51 KISSsoft Releases Bearing Calculation Module (August 5, 2011)
For the bearing calculation in KISSsoft, a new module is available (module WB4). This module permits the calculation of a single bea... Read News

52 KISSsoft Offers Gearbox Variant Calculations (September 1, 2011)
With KISSsys, gearbox variants can now be calculated very efficiently (module KS1). In contrast to the GPK-models, where within the fixed... Read News

53 Gear Expo Preview: KISSsoft Booth 408 (October 5, 2011)
KISSsoft is a software provider for gear design to AGMA, ISO and DIN Standards as well as intuitive custom inputs. They offer shaft and b... Read News

54 KISSsoft Releases 3-D Variant Skin Model (November 17, 2011)
Crossed helical gears are helical gears that are mounted on crossed axes. The shaft angle is usually Σ = 90 degrees. In contrast to... Read News

55 KISSsoft Improves GPK Models (December 19, 2011)
GPK is a KISSsys based gearbox calculation package which provides the user with 17 basic models of gearboxes as templates. For the c... Read News

56 KISSsoft Offers Optimization of Profile Corrections (January 12, 2012)
An important step in terms of noise and strength optimization of a gear pair is the optimal design of the micro-geometry.Thereby a combin... Read News

57 KISSsoft Campbell Diagram Calculates Speed Range (February 2, 2012)
For the calculation of shaft eigenfrequencies, the Campbell diagram is a very helpful tool for better understanding the cr... Read News

58 KISSsoft Releases Beta Version of Software (March 1, 2012)
The KISSsoft 03/2012 Beta Version has now been released for a test run. The final release will be available fon  April 23rd, 2012 - ... Read News

59 KISSsoft Announces Software Updates (May 10, 2012)
There are numerous new features implemented for KISSsoft 03/2012. Highlights include: The contact analysis was improved with a new m... Read News

60 KISSsoft Celebrates Suter Racing Lead (June 19, 2012)
KISSsoft AG, technology partner of Suter Racing, congratulates Tom Lüthi for his world championship lead in the Moto 2 class. The so... Read News

61 KISSsoft Offers Bolt Calculation with FE Results (August 16, 2012)
In KISSsoft, the calculation of bolts in accordance with VDI 2230 is implemented as specified in Sheet 2 (SPK module). The draft version ... Read News

62 KISSsoft Offers Load Distribution According to ISO 6336 Annex E (September 4, 2012)
The load distribution in the axial direction of cylindrical gears can be calculated very efficiently according to the calculation method ... Read News

63 KISSsoft Offers Profiles for Worm Wheel (October 31, 2012)
In the KISSsoft Release 03/2012, the profiles for worms with enveloping worm wheel were enhanced. The 3-D models for the profile types N,... Read News

64 KISSsoft Offers Simplified Modelling (December 26, 2012)
In the KISSsoft Release 03/2012, several assistants for the model building in KISSsys were implemented (module SYS). They facilitate and ... Read News

65 Hannover Messe 2016 Preview: KISSsoft (April 22, 2016)
On April 25, Hannover Messe opens its doors. At the same time, the new version of KISSsoft 03/2016 will be released with a number of... Read News

66 KISSsoft Offers Rapid 3D Modeling in KISSsys (June 24, 2016)
Modeling in KISSsys has been simplified in the latest KISSsoft Release 03/2016: Now, for example, when elements are added, the part ... Read News

67 KISSsoft Introduces Modifications and Import Options (November 4, 2021)
When designing and optimizing tooth flank modifications (for profile and flank line), different proposals are often compared with each ot... Read News

68 KISSsoft Expands Application Areas for Software Tools (May 27, 2020)
The KISSsoft calculation program and its KISSsys system add-on are applicable in a wide range of fields. The software is well known for i... Read News

69 KISSsoft Sharing Knowledge in Second Half of 2019 (August 1, 2019)
In the second half of 2019, KISSsoft will offer numerous opportunities to deepen your knowledge of the company's products and technol... Read News

70 KISSsoft Offers Contact Analysis (LTCA) of Asymmetric Gears (August 26, 2019)
KISSsoft now also offers contact analysis for asymmetric gears according to Langheinrich's dissertation (module ZA38). This allows, i... Read News

71 KISSsoft Offers Bevel Gear Calculation (September 5, 2019)
Calculation of scuffing for bevel and hypoid gears has been enhanced in KISSsoft Release 2019 (module ZC2, ZC9) according to the current ... Read News

72 KISSsoft Announces User Meeting 2019 (September 13, 2019)
The KISSsoft User Meeting 2019 takes place October 23-24 and will be held for the first time in English. We’d like to invite all ou... Read News

73 Shaft Editor Now Optimized in KISSsoft (September 27, 2019)
In the KISSsoft Release 2019, the shaft editor is extended and its handling optimized (WPK module). A new tab "3D-Viewer" has b... Read News

74 KISSsoft Introduces Double Planetary Stage Calculations (October 11, 2019)
Today, various types of planetary gearboxes are increasingly being used in the hybridization of drivetrains. Since the KISSsoft Release 2... Read News

75 KISSsoft Examines E-Mobility Applications (October 30, 2019)
The increasing number of electric vehicles is already having an impact on the design of transmissions. Although the number of gears in e-... Read News

76 KISSsoft Offers Crossed Helical Gear with Rack Option (November 21, 2019)
In vehicles, the transmission from the steering wheel to the wheels is often carried out by a rack and pinion drive. In standard industri... Read News

77 KISSsoft Offers Multiple Solutions for Gearbox Software (January 22, 2020)
Whether a gearbox is to be produced in-house or outsourced is still a central question for many companies. To make the right and quick de... Read News

78 KISSsoft Offers Direct Access to SKF Bearing Data (February 19, 2020)
Recently, the Swedish rolling bearing manufacturer SKF and the Swiss gearbox design software developer KISSsoft have joined forces: The K... Read News

79 KISSsoft Launches New Website (March 13, 2020)
With the launch of its new website, KISSsoft focuses its strategy on digitizing the customer section and presenting a clearly structured ... Read News

80 KISSsoft Offers Software to Students (April 1, 2020)
Nowadays, engineering studies should include the use of modern relevant software. For mechanical engineering students, these are mainly C... Read News

81 KISSsoft Implements ISO 6336 Changes (May 6, 2020)
ISO 6336 is the most important standard for the strength calculation of cylindrical gears. Parts 1 (principles, general influence facto... Read News

82 KISSsoft Extends SKF Bearing Module Functionality (November 11, 2020)
The SKF bearing module in KISSsoft now offers additional bearing performance output parameters (module WPK and WB1): bearing friction and... Read News

83 KISSsoft Release 2019 Available June 28th (June 27, 2019)
The new KISSsoft Release 2019 contains numerous new features, including KISSdesign, which provides the user with a tool that allows intui... Read News

84 KISSsoft Offers NVH Solutions (December 7, 2020)
For transmissions in EV drives, noise is a much greater issue than in combustion engines, where the engine masks the noise from the gearb... Read News

85 KISSsoft Offers Different Software License and Price Models (December 10, 2020)
The calculation programs of KISSsoft have a modular structure which covers, for example, system kinematics, efficiency and the sizing of ... Read News

86 KISSsoft Invests in Future with Start-up Offer (December 23, 2020)
As a start-up you need highest flexibility at lowest costs. With a time-limited KISSsoft start-up license, you can respond to any custome... Read News

87 KISSsoft 2021 Training Overview (February 10, 2021)
KISSsoft's 2021 training overview with classes in English includes introductory courses, advanced courses as well as trainings on spe... Read News

88 KISSsoft Examines Plastic Gears and Tooth Form Aspects (February 11, 2021)
With injection molded plastic gears, the designer has a great degree of freedom in defining the tooth form because it is not the result o... Read News

89 KISSsoft Fits Individual Software Needs with Customization (March 25, 2021)
One of the key aspects in modern software development is to give end users sufficient freedom to adapt their working environment to indiv... Read News

90 KISSsoft 2021 Beta Release Now Available (April 26, 2021)
On June 18, KISSsoft 2021 will be released. Users already have the opportunity to learn about the latest developments with the beta relea... Read News

91 KISSsoft Offers Material Influence on Gear Strength (May 11, 2021)
Material definitions prove to be fundamentally complex: In the standards for strength calculations for gears, numerous influences - such ... Read News

92 KISSsoft Integrates Gear Manufacturing and Metrology into Holistic Process (June 7, 2021)
With 4,000 licenses, KISSsoft is worldwide well-known and enjoys the reputation as a market leader in the field of design software. In ad... Read News

93 KISSsoft Release 2021 Now Available (June 24, 2021)
The new KISSsoft Release 2021 contains numerous innovations - for example, the 7th edition of the FKM Guideline has been implemented.The ... Read News

94 KISSsoft Offers Crossed Helical Gear Calculations (July 15, 2021)
The gear calculation in KISSsoft covers all common gear types such as cylindrical, bevel, hypoid, worm, beveloid, crown and crossed helic... Read News

95 KISSsoft Examines Gear Strength Calculation with Load Collectives (September 2, 2021)
Load spectra can be derived from time series - a measured time-torque-speed curve or one derived from simulations. For time series with o... Read News

96 KISSsoft Offers Compact Cylindrical Gear Reports (September 23, 2021)
The reports in KISSsoft are central in the calculation process for documenting user input and calculation results, and therefore allow fl... Read News

97 KISSsoft and SKF Collaborate on Bearing Calculation (October 14, 2021)
KISSsoft and SKF have joint forces once more: In the KISSsoft Release 2021, the shaft module allows bearing calculations to be performed ... Read News

98 KISSsoft Offers Feasibility Assessment for Power Skiving (July 17, 2019)
As a part of Gleason, we have a strong partner behind us when it comes to specific manufacturing know-how. For example, KISSsoft can now ... Read News

99 KISSsoft Offers COM Basic and Expert Interface (June 3, 2019)
The use of several software tools in the gearbox design process is a common challenge for engineers. The rising need for simple communica... Read News

100 KISSsoft VDI 2736 Receives New Supplement for Calculating Plastic Crossed Helical Gear Deformation and Wear (August 17, 2016)
The application area of plastic gears has grown significantly in the last decade. The requirements from the industry to design stronger, ... Read News

101 KISSsoft Adds Plastic Materials Manager Function (December 6, 2017)
It is often the case that plastics manufacturers don't provide any data that is relevant for calculations when they supply their prod... Read News

102 KISSsoft Determines Misalignment of Bevel Gears in Latest Update (October 18, 2016)
The relative position of the pinion and the ring gear is critical in determining the wear patterns of bevel gears. To determine the bevel... Read News

103 KISSsoft Offers Drive System Analysis (November 22, 2016)
In static system analysis, the deformation of the housing can be taken into account in the KISSsoft Release 03/2016, and therefore its ef... Read News

104 KISSsoft Offers New Evaluations in Contact Analysis (December 28, 2016)
The contact analysis is used for further noise and strength optimization. Based on the determination of tooth stiffness according to Webe... Read News

105 KISSsoft Enhances Planet Carrier Definition in KISSsys (January 24, 2017)
The consideration of the planetary carrier geometry with the parameterized approach (used for the deformation calculation and thus the ca... Read News

106 KISSsoft 03/2017 Beta Version is Available for Testing (February 15, 2017)
The KISSsoft 03/2017 Beta Version has now been released for a test run. The final release will be available April 24th, 2017 - just in ti... Read News

107 Gleason Acquires KISSsoft AG (February 16, 2017)
Gleason Corporation has announced that it has acquired KISSsoft AG, located in Bubikon, Switzerland. KISSsoft is a leader in the developm... Read News

108 KISSsoft Module Defines Gear Body Deformation (March 17, 2017)
For webbed gears, the deformation of the gear rim occurs in three dimensions and therefore cannot be calculated by the one-dimensional be... Read News

109 KISSsoft Software Introduces Options for Sizing Shaft Dimensions (June 20, 2017)
When defining dimensions for shafts, KISSsoft's software now provides options for sizing shaft dimensions with regard to strength, an... Read News

110 KISSsoft 03/2017 Release Allows Users to Evaluate Reliability of Gear Units, Individual Gears and Rolling Bearings (August 23, 2017)
A function in KISSsoft Release 03/2017 enables you to evaluate the reliability of gear units, individual gears and rolling bearings. ... Read News

111 EMO Preview: KISSsoft (September 5, 2017)
At this year's EMO Hannover fair (September 18th to 23rd, 2017), KISSsoft will be present at the Gleason stand, Booth D82 in Hall 26.... Read News

112 KISSsoft Calculations Include Splines, Springs and Plain Hydrodynamic Bearings (September 22, 2017)
KISSsoft's spline calculation now also includes a new function for calculating the strength of involute splined joints according to A... Read News

113 KISSsoft and Gleason Offer Two Software Solutions, One Design Interface (November 13, 2017)
KISSsys is KISSsoft‘s system add-on that enables you to model complete gear units and drive trains. KISSsoft calculates the service... Read News

114 KISSsoft Offers Selection of Predefined Gear Stages (November 16, 2017)
KISSsoft Release 03/2017 has a new function, the "Groups box", which lists a selection of predefined gear stages. These gear st... Read News

115 KISSsoft KISSsys and GEMS Programs Now Directly Interface, Exchange Data (November 27, 2017)
KISSsys is KISSsoft‘s system add-on that enables you to model complete gear units and drive trains. KISSsoft calculates the service... Read News

116 KISSsoft 03/2018 Beta Version is Available for Testing (January 18, 2018)
The KISSsoft 03/2018 Beta Version has now been released for a test run. The final release will be available from April 23rd, 2018 - just ... Read News

117 KISSsoft Adds LEHVOSS Material Data to 2019 Software Release (May 9, 2019)
More than 55 plastics are available for the gear design of KISSsoft. The material database of KISSsoft has been extended by additional pl... Read News

118 KISSsoft Offers Calculations for Asymmetrical Toothings (March 23, 2018)
The current KISSsoft version, 03/2017, provides you with a range of different options for calculating and inputting asymmetrical toothing... Read News

119 KISSsoft Releases 03/2018 (April 23, 2018)
On April 23rd, 2018, the Industrial Fair in Hannover opens its doors. At the same time, the new version of KISSsoft 03/2018 will be relea... Read News

120 KISSsoft Implements Bevel and Hypoid Gear Calculations (July 26, 2018)
In the ISO Committee, the scuffing load capacity calculation for bevel and hypoid gears is currently in draft form, and has been implemen... Read News

121 KISSsoft Offers Exact 3D Gear Models (August 23, 2018)
The manufacturing of complex workpieces, such as gears on five-axis milling machines, has increasingly established itself as an alternati... Read News

122 KISSsoft Redefines Plain Bearings in Turbo Drives (September 7, 2018)
For shafts with plain bearings, the bearing type “Plain Bearing” can now be redefined. This is especially important for turbo... Read News

123 KISSsoft Offers 55 Plastics for Sizing Gears (September 26, 2018)
Nowadays, gear units are increasingly being made out of different types of plastic. In many cases, this class of materials is a good alte... Read News

124 KISSsoft Offers Shaft Calculation and the Shaft Editor (October 22, 2018)
Additional features have been implemented in the Shaft Editor, which make it much easier to input shafts (WPK module). Users can pull on ... Read News

125 KISSsoft Offers Individual Design Elements in Software Packages (November 16, 2018)
KISSsoft's modular software includes international calculation standards, as well as a multitude of sizing and optimization options f... Read News

126 Modeling Gears with Assembly Groups in KISSsoft (November 28, 2018)
In the 03/2018 release of KISSsys, you have the option of “group-based modeling”. Using it, individual finished assemblies ca... Read News

127 SKF and KISSsoft Release a New Interface (December 12, 2018)
SKF and KISSsoft have worked together to create a new interface that makes it much easier to develop gear units: when designing machines,... Read News

128 KISSsoft Offers Generating Toothing Data in GDE Format (February 19, 2019)
The VDI has been working on defining an exchange format for toothing data in Germany for quite some time now. Cylindrical gear data can n... Read News

129 Hannover Messe Preview: KISSsoft (March 13, 2019)
At Hannover Messe from April 1-5 2019 attendees can take a first look at the latest developments in KISSsoft and KISSsys.The beta version... Read News

130 KISSsoft Provides Additional Tools for Gear Manufacturing (April 4, 2019)
KISSsoft provides a number of useful tools for gear manufacturing throughout the design process. When grinding helical gears an unwa... Read News

131 Determining Excitation Force in KISSsoft (April 24, 2019)
Since the 03/2018 release, KISSsoft contact analysis also calculates the excitation force according to the FVA Report 487 (module ZA30) i... Read News

132 KISSsoft and Geartech Jointly Develop New Software Program (January 19, 2006)
KISSsoft AG and GEARTECH Software are pleased to announce the introduction of a new and updated version of GEARCALC, a gear design pro... Read News