rake angle - Search Results
Articles About rake angle
Articles are sorted by RELEVANCE. Sort by Date.
Our company manufactures a range of hardened and ground gears. We are looking into using skiving as part of our finishing process on gears in the 4-12 module range made form 17 CrNiMO6 material and hardened to between 58 and 62 Rc. Can you tell us more about this process?
In the past, the blades of universal face hobbing cutters had to be resharpened on three faces. Those three faces formed the active part of the blade. In face hobbing, the effective cutting direction changes dramatically with respect to the shank of the blade. Depending on the individual ratio, it was found that optimal conditions for the chip removal action (side rake, side relief and hook angle) could just be established by adjusting all major parameters independently. This, in turn, results automatically in the need for the grinding or resharpening of the front face and the two relief surfaces in order to control side rake, hook angle and the relief and the relief angles of the cutting and clearance side.
How should we consider random helix angle errors fHő≤ and housing machining errors when calculating KHő≤? What is a reasonable approach?
A reader requests help designing the mating gear for an internal spline.
A calculation method is developed to estimate tool wear on hobs.
In this issue's column, Joe lays out the basic truth for most manufacturing companies: If you're not moving forward, you're falling behind.
I'm sure it comes as no surprise that finding skilled people to work in your manufacturing facility is no simple task. But after finding them, and investing in the development of their abilities, what happens when one of them - an employee your company really needs - becomes a troublesome employee? This is among the trickiest situations a manager can face.
The purpose of this paper is to present a method of designing and specifying gear teeth with much higher bending and surface contact strength (reduced bending and surface contact stresses). This paper will show calculation procedures, mathematical solutions and the theoretical background equations to do this.
The presidents of two manufacturing companies were having a drink in the lobby before the start of their trade association's annual meeting...
To ensure profitability and avoid losses, accurately quoting jobs is the first line of defense.
This paper presents a new approach to repair industrial gears by showing a case study where pressure angle modification is also considered, differently from the past repairing procedures that dealt only with the modification of the profile shift coefficient. A computer program has been developed to automatically determine the repair alternatives under two goals: minimize the stock removal or maximize gear tooth strength.
It's the New Year, and with it comes the opportunity to take a fresh look at your business objectives. Because business development is such a vital part of running a company, I'd like to present some guidelines I have found beneficial for securing new work and new customers.
Chapter 2, Continued In the previous sections, development of conjugate, face milled as well as face hobbed bevel gearsets - including the application of profile and length crowning - was demonstrated. It was mentioned during that demonstration that in order to optimize the common surface area, where pinion and gear flanks have meshing contact (common flank working area), a profile shift must be introduced. This concluding section of chapter 2 explains the principle of profile shift; i.e. - how it is applied to bevel and hypoid gears and then expands on profile side shift, and the frequently used root angle correction which - from its gear theoretical understanding - is a variable profile shift that changes the shift factor along the face width. The end of this section elaborates on five different possibilities to tilt the face cutter head relative to the generating gear, in order to achieve interesting effects on the bevel gear flank form. This installment concludes chapter 2 of the Bevel Gear Technology book that lays the foundation of the following chapters, some of which also will be covered in this series.
What is the difference between pressure angle and operating pressure angle?
When you push 850 horsepower and 9,000 rpm through a racing transmission, you better hope it stands up. Transmission cases and gears strewn all over the racetrack do nothing to enhance your standing, nor that of your transmission supplier.
With¬†reference to¬†the machining of an¬†involute spur or helical gear by the hobbing process,¬†this paper suggests a new criterion¬†for selecting¬†the position¬†of the hob axis relative to¬†the gear axis.
News from around the Gear Industry
News From Around the Gear Industry
The complete Industry News section from the March/April 2015 issue of Gear Technology.
The complete Product News section from the March/April 2015 issue of Gear Technology.
The complete Industry News section from the August 2013 issue of Gear Technology.
We are well into an odd-number year, so it must be just about time for another Gear Expo. Indeed, the big show -- Gear Expo 2013 -- kicks off in Indianapolis at 9:00 a.m. Tuesday, September 17, wrapping up Thursday the 19th at 4:00 p.m. And whether you are exhibiting or attending, the bottom line is you are going -- a good thing for you, your company and the tightly knit U.S. gear industry.
The complete Industry News section from the May 2013 issue of Gear Technology
It‚Äôs been said that the best ideas are often someone else's. But with rebuilt, retrofitted, re-controlled or remanufactured machine tools, buyer beware and hold onto your wallet. Sourcing re-work vendors and their services can require just as much homework, if not necessarily dollars, as with just-off-the-showroom-floor machines.
The complete Product News section from the January/February 2013 issue of Gear Technology.
In this edition of Arvin's Angle, Joe explains why training isn't an expense. It's an investment.
News Items About rake angle
1 Walter Tiger-Tec Positive Insert Geometries Come in 7 and 11 Degree Rake Angles (July 27, 2015)
Walter recently introduced a trio of universal, positive insert geometries that reduce downtime and boost performance in steel, stainless... Read News