roughing - Search Results

Articles About roughing


Articles are sorted by RELEVANCE. Sort by Date.

1 A Proposed Pre-Finish Cylindrical Gear Quality Standard (September/October 2016)

This proposed standard would not make any recommendations regarding the required quality for any application. The intent is to establish standard pre-finish quality classes for typical finishing operations, which only include the inspection elements that are important to properly evaluate pre-finish gear quality as it applies to the finishing operation. It would be the responsibility of the manufacturing/process engineer, quality engineer, or other responsible individual to establish the required pre-finish quality class for their application.

2 Economics of CNC Gear Gashing vs. Large D.P. Hobbing (August/September 1984)

Gear gashing is a gear machining process, very much like gear milling, utilizing the principle of cutting one or more tooth (or tooth space) at a time. The term "GASHING" today applies to the roughing, or roughing and finishing, of coarse diametral pitch gears and sprockets. Manufacturing these large coarse gears by conventional methods of rough and finish hobbing can lead to very long machining cycles and uneconomical machine utilization.

3 Gear Finishing by Shaving, Rolling and Honing, Part I (March/April 1992)

There are several methods available for improving the quality of spur and helical gears following the standard roughing operations of hobbing or shaping. Rotary gear shaving and roll-finishing are done in the green or soft state prior to heat treating.

4 Estimating Hobbing Times (July/August 1989)

Hobbing is a continuous gear generation process widely used in the industry for high or low volume production of external cylindrical gears. Depending on the tooth size, gears and splines are hobbed in a single pass or in a two-pass cycle consisting of a roughing cut followed by a finishing cut. State-of-the-art hobbing machines have the capability to vary cutting parameters between first and second cut so that a different formula is used to calculate cycle times for single-cut and double-cut hobbing.

5 Reducing Production Costs in Cylindrical Gear Hobbing and Shaping (March/April 2000)

Increased productivity in roughing operations for gear cutting depends mainly on lower production costs in the hobbing process. In addition, certain gears can be manufactured by shaping, which also needs to be taken into account in the search for a more cost-effective form of production.

6 Stock Distribution Optimization in Fixed Setting Hypoid Pinions (July/August 2001)

Face-milled hypoid pinions produced by the three-cut, Fixed Setting system - where roughing is done on one machine and finishing for the concave-OB and convex-IB tooth flanks is done on separate machines with different setups - are still in widespread use today.

7 Honing of Gears (August 2014)

The honing of gears - by definition - facilitates ease of operation, low noise and smoother performance in a transmission. Honing also contributes to reduced friction in the powertrain. Both the intense cutting (roughing process) as well as the functionally fine- finishing of transmission gears can be performed in one setup, on one machine.

News Items About roughing

1 Kennametal Offers KOR 5 for Aluminum Roughing for Aerospace Applications (November 7, 2019)
Kennametal has recently introduced the KOR 5 solid carbide end mill for aluminum roughing for aerospace applications. It is designed for ... Read News

2 Kennametal Offers Two Solutions for Roughing and Fine Finishing (November 15, 2017)
Kennametal is expanding the Mill 16 platform by introducing new cutter body styles, new insert geometries and grades, and a split case de... Read News

3 Sandvik Coromant CoroMill 745 Face Milling Cutter Provides Higher Metal Removal Rates for Roughing and Semi-Finishing Milling Operations (October 3, 2017)
Cutting tool and tooling system specialist Sandvik Coromant has unveiled a new, high-feed version of the CoroMill 745 face mill... Read News

4 Ingersoll Offers Hi-Quad Plunge Roughing Cutters (April 3, 2014)
Featuring four cutting edges, the Hi-Quad Plunge offers .45" max. radial depth of cut capability (depending on corner radius)... Read News

5 Exsys Tool Provides Roughing/Gear Hobbing on Single Machine (August 16, 2011)
A special compact gear hobber system from Exsys Tool, Inc. allows shops to generate splines, spur or helical gears in one operation. The ... Read News