slewing ring - Search Results
Articles About slewing ring
Articles are sorted by RELEVANCE. Sort by Date.
Banyan Technologies introduces a robotic chamfering device suitable for deburring, chamfering and radiusing the edges of slew bearing ring gears.
We are currently experiencing wear on the bull gear on our converter at the steel plant. We want to be able to draw the original gear profile to compare this with the worn tooth before we decide on the next steps. I have attempted this, but there is a correction factor given and I am unsure how to apply this. Could someone give advice on this? Please find attached the PDFâ€™s for the bull gear and the pinion gear. They are old drawings! The wear is on the wheel.
The complete product news section from the September / October 2014 Issue Gear Technology.
News from around the Gear Industry
The complete Product News section from the March/April 2015 issue of Gear Technology.
In this special section, our editors have gathered recent news and information related to the heat treatment of gears. Here youâ€™ll find a comprehensive assortment of news and upcoming events that will help you understand the various heat treatment processes available for gears and choose the best option for your projects, whether you heat treat in-house or send your gears to a commercial heat treating provider.
The process of forging metal into shapes possesses a surprisingly long and storied history. For example, the method of hot rolling can trace its protracted existence all the way back to an enigmatic Italian polymath named Leonardo da Vinci (you may have heard of him), who reportedly invented the rolling mill one lazy day in the 1400s.
I have heard that X-ray diffraction does not tell the whole story and that I should really run a fatigue test. I understand this may be the best way, but is there another method that gives a high degree of confidence in the residual stress measurement?
The complete Industry News section from the March/April 2015 issue of Gear Technology.
News about New Products
The complete Industry News section from the August 2014 issue of Gear Technology.
News about recent products
Latest news about the Latest Products
Let's talk about large gears. Not the size or scope or inspection process, but the forecast and market potential in areas that utilize these massive components. We'll examine key industry segments like energy and mining and tap IHS Economics for a forecast for 2016 and 2017 (spoiler alert: it's not great). Additionally, we'll discuss some of the critical factors influencing global big gear manufacturers Ferry-Capitain and Hofmann Engineering.
Latest new from the Gear Industry
Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.
News from around the Gear Industry
your life and in your professional career is an inflection point for you to take stock of where you came from and where you are going.
This is a very exciting year for AGMA as the organization celebrates its 100-year anniversary. In addition to the anniversary, AGMA President Joe Franklin, jr., who has done an outstanding job at the helm of AGMA for the last 25 years, will retire, and we welcome in our new AGMA President, Matt Croson, who will lead us into the next 100 years. The centennial kicked off in October with a dinner at the AGMA Gear Expo in Detroit and will continue throughout 2016 with a number of exciting events scheduled to celebrate this milestone anniversary.
Over the past few months I've talked with several different gear manufacturers who are in the process of upgrading their gear making equipment with modern CNC machine tools. Each of these manufacturers has come to the realization that in order to stay competitive, he needs to streamline operations and become more efficient...
The honing of gears - by definition - facilitates ease of operation, low noise and smoother performance in a transmission. Honing also contributes to reduced friction in the powertrain. Both the intense cutting (roughing process) as well as the functionally fine- finishing of transmission gears can be performed in one setup, on one machine.
Chamfering and deburring of cylindrical gears does not get much love from manufacturers. The process is seen as a necessary evil since it is adding cost without adding value. However, there are good reasons for not underrating this important auxiliary process. Chamfering and deburring takes care of several issues which may come up during the manufacture of quality gears.
The complete Industry News section from the August 2013 issue of Gear Technology.
Industry battles it out for World's Largest Gear title.
The Tiger Team from Hoerbiger looks for ways to cut waste and improve throughput in the company's assembly cell.
Itâ€™s been said that the best ideas are often someone else's. But with rebuilt, retrofitted, re-controlled or remanufactured machine tools, buyer beware and hold onto your wallet. Sourcing re-work vendors and their services can require just as much homework, if not necessarily dollars, as with just-off-the-showroom-floor machines.
The complete Industry News section from the May 2013 issue of Gear Technology
Although a cell is dedicated to produce a single part family, it must have the requisite equipment capabilities, routing flexibility, cross-trained employees and, to the extent possible, minimal external process dependencies. Cells are often implemented in job shops since they provide the operational benefits of flowline production.
Bearings ain't beanbag. They are complicated. They are big-business. They are often counterfeited. They are used in virtually anything that moves. But it is the "complicated" part that challenges OEMs, job shops and other operations, and, most of all, their employees. Add to that the countless other entities around the world that are intimately involved with bearings and you can arrive at a semblance of an idea of just how important these precious orbs can be to a successful operation.
We are well into an odd-number year, so it must be just about time for another Gear Expo. Indeed, the big show -- Gear Expo 2013 -- kicks off in Indianapolis at 9:00 a.m. Tuesday, September 17, wrapping up Thursday the 19th at 4:00 p.m. And whether you are exhibiting or attending, the bottom line is you are going -- a good thing for you, your company and the tightly knit U.S. gear industry.
Job shops may be ill-advised to undertake a complete reorganization into FLEAN (Flexible and Lean) cells. A FLEAN cell would (i) be flex-ible enough to produce any and all orders for parts that belong in a specific part family and (ii) utilize lean to the maximum extent possible to eliminate waste.
"Going green" and energy efficiency are goals that all industries -- especially in Europe and the United States -- are working on, in such sectors as electric motors, lubrication, gears and on and on. Drumroll here please for magnetic gearing
In this installment of Ask the Expert, Dr. Stadtfeld describes the best methods for measuring backlash in bevel gears.
Like many of you in the gear industry, weâ€™ve been working extremely hard over the past few months getting ready for Gear Expo 2013, which takes place September 17-19 in Indianapolis.
Readers respond to our "Job Shop Lean" column and the "My Gear is Bigger than Your Gear" article.
The complete Product News section from the September 2013 issue of Gear Technology.
The complete Product News section from the October 2013 issue of Gear Technology.
The complete Industry News section from the October 2013 issue of Gear Technology.
The final installment of our Job Shop Lean series includes a wide variety of educational resources to help you continue your own lean journey.
The complete Product News section from the January/February 2014 issue of Gear Technology.
It's not easy being big. Maybe that's not exactly how the phrase goes, but it's applicable, particularly when discussing the quality requirements of large gears. The size alone promises unique engineering challenges. BONUS Online Exclusive: Big or Small - Inspection is Key to Success.
Latest News from around the industry
Our special advertising section featuring some of the premier gear industry suppliers at IMTS 2016.
Our experts tackle the topic of measuring involute masters, including both master gears and gear inspection artifacts.
The complete Product News section from the September/October 2019 issue of Gear Technology.
Deburring or chamfering of gear teeth is gaining attention in practical settings. And with a view to make the production sequence as efficient as possible, it is becoming increasingly important to be able to implement the deburring tasks directly on the cutting machine after spiral cutting.
In helicopter applications, the two-piece gear is typically joined by welding, bolts, or splines. In the case of the U.S. Army CH-47D Chinook helicopter, a decision was made to eliminate these joints through the use of integral design. Integral shaft spiral bevel gears must be designed such that the shaft does not interfere with gear tooth cutting and grinding. This paper discusses techniques to iterate in the design stage before manufacturing begins.
The complete Product News section from the March/April 2019 issue of Gear Technology.
The complete Industry News section from the March/April 2019 issue of Gear Technology.
Finding capable, dependable machinists is one of the great challenges of modern manufacturing. Most gear manufacturers we talk to would hire more machine operators - if only they could find them. They lament the fact that their workforce is getting older and grayer, and they don't know what to do.
The secret to meeting today's inspection demands is influenced by the technology and those in charge of operating it.
The author conducts a simple experiment to verify his anecdotal knowledge about chamfering hard vs soft parts.
The complete Industry News section from the July 2019 issue of Gear Technology.
Motion + Power Technology Expo VIP Exhibitors special advertising section.
Chamfering and deburring have been described as "unloved," a "necessary evil" and, in fact - "dead." After all, manual deburring is still common in many shops.
How 3-D printing is changing the powder metal performance game.
The complete Industry News section from the November/December 2019 issue of Gear Technology.
The future gives the gear market plenty to think about in areas like automation, additive manufacturing and machine learning.
Gleason skiving machines equipped with on-board cutter sharpening; Helios celebrates anniversary of cutter sharpener line; and more product news.
The complete Industry News section from the May 2020 issue of Gear Technology.
Writing about additive manufacturing (AM) and the 3-D printing of gears is somewhat akin to publishing an updated dictionary. A new edition dictionary is literally already out of date before it hits Amazon's or your local bookseller's shelves. New words are coined and definitions are updated constantly. So it is with AM: The technology is evolving so quickly that technical papers and other sources of AM information require constant revision.
The latest gear industry news from Machine Tool Builders, Global Gear, EMAG, Bourn & Koch, Klingelnberg and others.
The Digital Manufacturing Revolution Evolves in 2020
The latest technological solutions help keep chamfering and deburring operations in-line -- often without increasing cycle times.
"If it ain't broke, don't fix it," goes the hoary bromide. But what if the time comes - and it most surely will - that in fact it is broke? Do you fix it or replace it? And when does gearbox maintenance and repair arrive at a point of diminishing returns and buying new is the answer?
News From Around the Gear Industry
I'm sure it comes as no surprise that finding skilled people to work in your manufacturing facility is no simple task. But after finding them, and investing in the development of their abilities, what happens when one of them - an employee your company really needs - becomes a troublesome employee? This is among the trickiest situations a manager can face.
In a capitalist society, the way things usually work is that government and academia focus on research and development, while industry focuses on commercialization. The result is an increasingly wide disconnect in the applied research sector, which deals primarily with technology development and demonstration.
News from around the Gear Industry
The latest from Liebherr, Gleason, Klingelnberg and more.
The presidents of two manufacturing companies were having a drink in the lobby before the start of their trade association's annual meeting...
A reader wonders about gears where the tops of the teeth are the bearing surface, as used in spur gear differentials. Do they require any special construction or processing?
AGMA adds two new committees, Star Cutter Celebrates 90 years, plus other news from around the industry.
For over 50 years, the Do Nothing Machine has entertained the public eye with its complex machinery, a mountain of over 700 gears put together for the express purpose of doing nothing.
RCD Engineering's switch from manual to CNC hobbing operations breaks gear manufacturing lead time records with Bourn & Koch 100H in their gear production pit crew.
The latest technology on display in Columbus, OH. October 24-26.
The complete industry news section from the June 2018 issue of Gear Technology.
You get one shot to make a first impression. One opportunity to show your customers, vendors and suppliers that you provide a steady, reliable product that will generate repeat business. How do you make this happen? What tools and strategies are available to get gear materials (forgings, gear blanks, etc.) shipped faster and more efficiently in today's tech-heavy, fast-paced, manufacturing environment?
Gear Technology hosts dinner for technical contributors to the gear industry during this year's AGMA Fall Technical Meeting and Gear Expo in Columbus, OH. Plus other news from around the industry.
As the founder, president and co-host of Manufacturing Talk Radio, as well as publisher of Metals & Manufacturing Outlook eZine, I am excited to report that the economic outlook for 2018 is just too good not to tout. Whatever "final GDP number" the government divines for 2017, the year will finish above 3% for the first time in a decade.
Business is finally starting to get back to usual in the big gear world, which offers us a chance to look back at the greatest lesson on how to survive an economic downturn. Includes the sidebar: "Brass Tacks with Klingelnberg."
Emerging technologies such as robotics/automation, new materials, additive manufacturing and IIoT can and will change the course of gear manufacturing for the foreseeable future.
As you might imagine, I talk to many gear industry people through the course of my day-to-day activities. And there is one question that I hear over and over again. "Joe, we need an experienced gear process engineer. Do you know anyone who's available?"
Fraunhofer CMI focuses on new U.S. gear and transmission technologies group, plus other news from around the industry.
New machining fluids for automotive, jaw boring rings, virtual machine simulation and coordinate measuring software are highlighted in the March/April 2018 issue of Gear Technology.
"Design for manufacturability" (DFM) is a well-established practice, essential to realizing the successful transformation of concepts into mass-produced gears and motion control devices. And yet, all too often issues that could have been avoided are identified very late in the process that impact production costs and schedules. This suggests that key DFM principles are often underutilized in practice and are not applied consistently - or to the degree necessary - to avoid these negative results.
"Gear Train" is a new Gear Technology section focusing on training and education in the gear industry. For the first installment, we've focused on AGMA's online and video training programs.
When you push 850 horsepower and 9,000 rpm through a racing transmission, you better hope it stands up. Transmission cases and gears strewn all over the racetrack do nothing to enhance your standing, nor that of your transmission supplier.
A series of short reports on global manufacturing growth and the gear industry's role.
When you graduated from school and made your way into the world, you probably thought youâ€™d learned everything you needed to know to be successful. But those of us whoâ€™ve been out in the workforce for some time know that you never stop learning.
A study was performed to evaluate fault detection effectiveness as applied to gear-tooth pitting-fatigue damage. Vibration and oil-debris monitoring (ODM) data were gathered from 24 sets of spur pinion and face gears run during a previous endurance evaluation study.
Publisher Michael Goldstein discusses the loss of U.S. manufacturing capability and what we should do about it.
Gary A. Bish, director of product design technology for Horsburgh & Scott, discusses his role as chairman of the AGMA mill gearing committee.
With growing markets in aerospace and energy technologies, measuring hob cutters used in gear cutting is becoming an essential requirement for workpieces and machine tools. Zoller, a provider of solutions for tool pre-setters, measuring and inspection machines and tool management software, has developed a new partnership with Ingersoll/Germany for shop floor checking of hob cutters by a combined hardware and software approach.
Interactive jewelry designed from micro-precision parts.
Compass Automation unveiled its Robotic Deburring System at Gear Expo 2009.
Design innovation, superior engineering properties, high end-market visibility and sustainability distinguish the winners of the 2011 Design Excellence awards, the annual powder metallurgy (PM) design competition sponsored by the Metal Powder Industries Federation.
The struggles of the manufacturing economy in 2009 are well documented. Even among those of us with long careers, most of us have never seen activity come to a screeching halt the way it did last year. 2009 was tough on all of us. So, what should we expect in 2010?
Make no mistake -- lean manufacturing is here to stay. And no wonder. As a fiercely competitive global economy continues to alter companiesâ€™ â€śMain Streetâ€ť thinking, that relatively new dynamic is spurring the need for â€śI-need-it-yesterdayâ€ť production output. And for increasingly more industries -- big or small -- that means getting as lean as you can, as fast as you can.
In epicyclic gear sets designed for aeronautical applications, planet gears are generally supported by spherical roller bearings with the bearing outer race integral to the gear hub. This article presents a new method to compute roller load distribution in such bearings where the outer ring canâ€™t be considered rigid.
The objective, according to Dr.- Ing. HansjĂ¶rg Geiser, head of development and design for gear machines at Liebherr, was to develop and design a combined turning and hobbing machine in which turning, drilling and hobbing work could be carried out in the same clamping arrangement as the hobbing of the gearings and the subsequent chamfering and deburring processes.
This paper presents an original method to compute the loaded mechanical behavior of polymer gears. Polymer gears can be used without lubricant, have quieter mesh, are more resistant to corrosion, and are lighter in weight. Therefore their application fields are continually increasing. Nevertheless, the mechanical behavior of polymer materials is very complex because it depends on time, history of displacement and temperature. In addition, for several polymers, humidity is another factor to be taken into account. The particular case of polyamide 6.6 is studied in this paper.
What was once recognized as the unique genius of America is now slipping away from us and, in many areas, is now seen as a "second rate" capability. Unless action is taken now, this country is in real danger of being unable to regain its supremacy in technological development and economic vigor. First Americans must understand the serious implications of the problem; and second, we must dedicate ourselves to national and local actions that will ensure a greater scientific and technological literacy in America.
The Integral Temperature Method for the evaluation of the scoring load capacity of gears is described. All necessary equations for the practical application are presented. The limit scoring temperature for any oil can be obtained from a gear scoring test.
Industry News from October/November 1984 Gear Technology.
Below are listed a variety of commonly used constants arranged numerically to permit ease of reference. Wherever an asterisk (*) is shown, the constant is exact as given, it being generally a mathematical constant or one fixed by definition. In cases where the first constant listed is followed by another in parenthesis, the first is the round number generally used, while the second is the more exact value.
Several innovations have been introduced to the gear manufacturing industry in recent years. In the case of gear hobbingâ€”the dry cutting technology and the ability to do it with powder-metallurgical HSSâ€”might be two of the most impressive ones. And the technology is still moving forward. The aim of this article is to present recent developments in the field of gear hobbing in conjunction with the latest improvements regarding tool materials, process technology and process integration.
For more than 10 months, NASA ground engineers and International Space Station (ISS) astronauts have been struggling with a perplexing malfunction of one of the stationâ€™s two solar array rotary joints (SARJ).
Mechanical efficiency is an important index of gearing, especially for epicyclic gearing. Because of its compact size, light weight, the capability of a high speed ratio, and the ability to provide differential action, epicyclic gearing is very versatile, and its use is increasing. However, attention should be paid to efficiency not only to save energy, but sometimes also to make the transmission run smoothly or to avoid a self-locking condition.
This article summarizes the use of laboratory fatigue data for bearings and gears coupled with probabilistic life prediction and EHD theories to predict the life and reliability of a commercial turboprop gearbox.
Aerospace/Defense contracts offer unique challenges for gear manufacturers.
High speed gearing, operating with low viscosity lubricants, is prone to a failure mode called scoring. In contrast to the classic failure modes, pitting and breakage, which generally take time to develop, scoring occurs early in the operation of a gear set and can be the limiting factor in the gear's power capability.
The seemingly simple process of placing a uniform chamfer on the face ends of spur and helical gears, at least for the aerospace industry, has never been a satisfactory or cost effective process.
If anyone should ever need convincing that the state of American manufacturing is in ongoing decline, consider this: the state of Michigan has the highest concentration of engineers in the country, yet also has the highest unemployment rate. But there are ripples of hope out there as grassroots and otherwise organized groups are fighting the good fight in an attempt to reverse that trend.
Austempering heat treatments (austenitizing followed by rapid cooling to the tempering temperature) have been applied to nodular irons on an experimental basis for a number of years, but commercial interest in the process has only recently come to the surface.
This article describes a new technique for the size determination of external Involute splines by using a span measuring method. It provides application performance information demonstrating how this method and its measurements correlate with the traditional spline ring gage sizing method.
Big gears and wind turbines go together like bees and honey, peas and carrots, bread and butter andâ€”well, you get the idea. Wind isnâ€™t just big right now, itâ€™s huge. The wind industry means tremendous things for the energy dependent world we live in and especially big things for gear manufacturers and other beleaguered American industries.
Two high-volume gear production cells grace the shop floor at Delta Research Corporation in Livonia, Michigan. Thanks to lean manufacturing, these cells have never shipped a defective part to a customer since they were developed over three years ago.
Sales are up and it's time to hire some additional gear manufacturing personnel. Let's see--what qualities are wee looking for in the ideal candidates?
Step forward now to help yourself and your industry.
Lack of skilled workers mirrors U.S. manufacturing's decline.
New tool from LMT-Fette provides combination of operations.
This article gives readers a glimpse of some companies that manufacture gears in the Far East. We've talked with more than a dozen companies in India, Taiwan and Korea...
When Forest City Gear started manufacturing gears for medical components in the 1980s, it was a minuscule part of the company's business. Today, the medical device industry represents 18-20%.
Charles Schultz of Brad Foote Gear Works discusses some of the finer points of engineering tolerances--and muscle cars.
When the fans start screaming at the Daytona 500, they're cheering for Jeff Gordon. Only the die-hard racing fan can appreciate the gearing and engineering that goes into each race car.
Wait a minute, we don't measure pitch diameter. We're sometimes asked to measure it by customers, though, especially ones with older drawings.
POLCA: An alternative to Kanban for high-variety or custom-engineered products.
Gears are currently run at high speed and under high load. It is a significant problem to develop lubricants and gears with high load-carrying capacity against scoring. The particles of molybdenum disulfide have been considered to increase the scoring resistance of the gears. The wear characteristics and the scoring resistance of the gears lubricated with MoS2 paste and MoS2 powder have been investigated. (1) However, there are few investigations on the performance of the gears coated with MoS2 film with respect to scoring.
Rules and Formula for Gear Sizes
This is the first article in an eight-part "reality" series on implementing continuous improvement at Hoerbiger Corporation. Throughout 2013, Dr. Shahrukh Irani will report on his progress applying the job shop lean strategies he developed during his time at Ohio State University.
Capstan Atlantic, located in Wrentham, Massachusetts, produces powder metal gears, sprockets and complex structural components. The company has provided unique powder metal products in a variety of industries including automotive, business machines, appliances, lawn and garden equipment and recreational vehicles.
I must admit that after thumbing through the pages of this relatively compact volume (113 pages, 8.5 x 11 format), I read its three chapters(theory of gearing, geometry and technology, and biographical history) from rear to front. It will become obvious later in this discussion why I encourage most gear engineers to adopt this same reading sequence!
Gears are extremely complex shapes. Coordinate measuring machines, or CMMs, are designed to measure complex shapes. It seems to follow that CMMs world, therefore, be the ideal tool for measuring gears. But the answer is not so simple.
The implementation of powder metal (PM)components in automotive applications increases continuously, in particular for more highly loaded gear components like synchromesh mechanisms. Porosity and frequently inadequate material properties of PM materials currently rule out PM for automobile gears that are subject to high loads. By increasing the density of the sintered gears, the mechanical properties are improved. New and optimized materials designed to allow the production of high-density PM gears by single sintering may change the situation in the future.
This report presents some interim results from an ongoing project being performed by INFAC, the Instrumented Factory for Gears. The purposes of this initial phase of the project were to demonstrate the feasibility of robotic automated deburring of aerospace gears, and to develop a research agenda for future work in that area.
The traditional way of controlling the quality of hypoid gears' tooth flank form is to check the tooth flank contact patterns. But it is not easy to exactly judge the tooth flank form quality by the contact pattern. In recent years, it has become possible to accurately measure the tooth flank form of hypoid gears by the point-to-point measuring method and the scanning measuring method. But the uses of measured data of the tooth flank form for hypoid gears have not yet been well developed in comparison with cylindrical involute gears. In this paper, the tooth flank form measurement of generated face-milled gears, face-hobbed gears and formulate/generated gears are reported. The authors discuss the advantages and disadvantages of scanning and point-to-point measuring of 3-D tooth flank forms of hypoid gears and introduce some examples of uses of measured data for high-quality production and performance prediction.
Carburized gears have higher strengths and longer lives compared with induction-hardened or quench-tempered gears. But in big module gears, carburizing heat-treatment becomes time-consuming and expensive and sometimes cannot achieve good hardness due to the big mass-effect. Also, it is not easy to reduce distortion of gears during heat treatment.
Optimizing the running behavior of bevel and hypoid gears means improving both noise behavior and load carrying capacity. Since load deflections change the relative position of pinion and ring gear, the position of the contact pattern will depend on the torque. Different contact positions require local 3-D flank form optimizations for improving a gear set.
Why traditional lean manufacturing approaches need to be adapted for job shop environments.
Our experts comment on reverse engineering herringbone gears and contact pattern optimization.
The trend toward moving coordinate measuring machines to the shop floor to become an integral part of the manufacturing operations brings real time process control within the reach of many companies. Putting measuring machines on the shop floor, however, subjects them to harsh environmental conditions. Like any measuring system, CMMs are sensitive to any ambient condition that deviates from the "perfect" conditions of the metrology lab.
Gearbox performance, reliability, total cost of ownership (energy cost), overall impact on the environment, and anticipation of additional future regulations are top-of-mind issues in the industry. Optimization of the bearing set can significantly improve gearbox performance.
In the August issue, we examined the lean tools that will and will not work in high-mix, low-volume manufacturing facilities. Now, we will examine how to implement the tools that will work in the job shop with an approach that expands the capabilities of value stream mapping.
The complete Industry News section from the October 2012 issue of Gear Technology.
It wasnâ€™t so very long ago that a high school-educated, able-bodied person with a will to work typically had little trouble finding a decent job in manufacturing. Whether at an area job shop, an OEM plant or auto plantâ€”work was to be had. Work that paid well enough to marry, buy a home, feed, raise and educate a familyâ€”with even enough left over for a modest retirement pension.
Before we get into projections and prognostications about the future, letâ€™s take a minute to review 2012. For many in the gear industry, the year was better than expected. Some manufacturers had a very successful year leading up to an even more successful manufacturing trade show (IMTS 2012). Others were searching for more business, hoping that the general state of the economy wouldnâ€™t make things worse. In some cases, it did.
Understanding the morphology of micropitting is critical in determining the root cause of failure. Examples of micropitting in gears and rolling-element bearings are presented to illustrate morphological variations that can occur in practice.
The complete Industry News section from the November/December 2012 issue of Gear Technology.
The complete Product News section from the January/February 2013 issue of Gear Technology.
Computers are everywhere. It's gotten so that it's hard to find an employee who isn't using one in the course of his or her day - whether he be CEO or salesman, engineer or machinist. Everywhere you look, you find the familiar neutral-colored boxes and bright glowing screens. And despite the gear industry's traditional reluctance to embrace new technology, more and moe of what you find on those screens are gears.
Who wants or needs technical details about gearing? Who cares about it? Three out of every four people who are reading this magazine make up at least 75% of those who have an interest in the subject. The members of AGMA, EUROTRANS, JGMA and JSIM have an interest. All the people attending the Gear Expo in Detroit have an interest. Clearly, however, the people with the most pressing interest in our industry are our customers, the end users of gear products. The unfortunate reality, though, is that in many cases, these customers don't even know that's what they want.
The power of high speed gears for use in the petrochemical industry and power stations is always increasing. Today gears with ratings of up to 70,000kW are already in service. For such gears, the failure mode of scoring can become the limiting constraint. The validity of an analytical method to predict scoring resistance is, therefore, becoming increasingly important.
Popular wisdom has it that manufacturing in the United States is no longer a viable entity. We are told that quality is poor, skilled labor is difficult to obtain, if not impossible, demand is low, and the government is helping to discourage business. So what should we do, give up?
In the gearing industry, gears are lubricated and cooled by various methods. At low to moderate speeds and loads, gears may be partly submerged in the lubricant which provides lubrication and cooling by splash lubrication. With splash lubrication, power loss increases considerably with speed. This is partially because of churning losses. It is shown that gear scoring and surface pitting can occur when the gear teeth are not adequately lubricated and cooled.
In ParI 1 several scuffing (scoring) criteria were shown ultimately to converge into one criterion, the original flash temperature criterion according to Blok. In Part 2 it will be shown that all geometric influences may be concentrated in one factor dependent on only four independent parameters, of which the gear ratio, the number of teeth of the pinion, and the addendum modification coefficient of the pinion are significant.
Why Brushes? In this age of hi-tech, robots, automatic machines, machining cells, etc., is there a niche somewhere for power brushes? Let me answer by asking another question. What tool does the gear manufacturer have in his arsenal that allows him to deburr green gears, hardened gears, hobbed gears, ground gears and shaved gears? What tool allows him to deburr powder metal gears - green and sintered - brass gears, bronze gears, stainless gears made of exotic materials such as inconel, waspaloy, or hastaloy, and fiber and plastic gears? How about spur gears, helical gears, sprockets, both internal and external splines, clutch teeth and pump gears?
An investigation of transmission errors and bearing contact of spur, helical, and spiral bevel gears was performed. Modified tooth surfaces for these gears have been proposed in order to absorb linear transmission errors caused by gear misalignment and to localize the bearing contact. Numerical examples for spur, helical, and spiral bevel gears are presented to illustrate the behavior of the modified gear surfaces with respect to misalignment and errors of assembly. The numerical results indicate that the modified surfaces will perform with a low level of transmission error in non-ideal operating environments.
Nashville - One of the highlights of this year's SME Advanced Gear Processing and Manufacturing Clinic was a tour of the new GM Saturn automobile manufacturing plant outside the city. There in the Tennessee hills is a hopeful vision of the future of the American automobile industry. It may well be the future of American large-scale manufacturing in general.
When we have problems with gearset failure, a common diagnosis is misalignment. What exactly is that and how do we prevent it? The second most common "killer" of good gear sets is misalignment (dirt, or abrasive wear, is first). Gear teeth simply won't carry the load if they don't touch, and the portion that does touch has to carry an overload to make up for the missing contact area.
Whether gear engineers have to replace an old gear which is worn out, find out what a gear's geometry is after heat treatment distortion, or just find out parameters of gears made by a competitor, sometimes they are challenged with a need to determine the geometry of unknown gears. Depending on the degree of accuracy required, a variety of techniques are available for determining the accuracy of an unknown gear. If a high degree of precision is important, a gear inspection device has to be used to verify the results. Frequently, several trial-and-error attempts are made before the results reach the degree of precision required.
Dear Editor: In Mr. Yefim Kotlyar's article "Reverse Engineering" in the July/August issue, I found an error in the formula used to calculate the ACL = Actual lead from the ASL = Assumed lead.
In the 1960's and early 1970's, considerable work was done to identify the various modes of damage that ended the lives of rolling element bearings. A simple summary of all the damage modes that could lead to failure is given in Table 1. In bearing applications that have insufficient or improper lubricant, or have contaminants (water, solid particles) or poor sealing, failure, such as excessive wear or vibration or corrosion, may occur, rather than contact fatigue. Usually other components in the overall system besides bearings also suffer. Over the years, builders of transmissions, axles, and gear boxes that comprise such systems have understood the need to improve the operating environment within such units, so that some system life improvements have taken place.
The chamfering and deburring operations on gear teeth have become more important as the automation of gear manufacturing lines in the automotive industry have steadily increased. Quieter gears require more accurate chamfers. This operation also translates into significant coast savings by avoiding costly rework operations. This article discusses the different types of chamfers on gear teeth and outlines manufacturing methods and guidelines to determine chamfer sizes and angles for the product and process engineer.
The phenomena of deterioration of surfaces are generally very complex and depend on numerous conditions which include the operating conditions, the type of load applied, the relative speeds of surfaces in contact, the temperature, lubrication, surfaces hardness and roughness, and the compatibility and nature of materials.
The first part of this article included abrasive wear with two bodies, streaks and scoring, polishing, and hot and cold scuffing. This part will deal with three-body wear, scratches or grooves, and interference wear. Normal, moderate, and excessive wear will be defined, and a descriptive chart will be presented.
Given the current economic and legal climate, matters of hiring and firing are cause for considerable concern among managers. In addition to all the other factors to be considered, employers must be wary of exactly how these procedures should be carried out, so that the company is not left open to lawsuits based on charges of discrimination of one kind or another. The reasons given for a particular employment decision may be as crucial to determining liability as the decision itself.
Could the tip chamfer that manufacturing people usually use on the tips of gear teeth be the cause of vibration in the gear set? The set in question is spur, of 2.25 DP, with 20 degrees pressure angle. The pinion has 14 teeth and the mating gear, 63 teeth. The pinion turns at 535 rpm maximum. Could a chamfer a little over 1/64" cause a vibration problem?
Question: In the January/February issue of your magazine, we came across the term "electronic gearbox." We have seen this term used elsewhere as well. We understand that this EGB eliminates the change gear in the transmission line, but not how exactly this is done. Could you explain in more detail?
In today's industrial marketplace, deburring and chamfering are no longer just a matter of cosmetics. The faster speeds at which transmissions run today demand that gear teeth mesh as smoothly and accurately as possible to prevent premature failure. The demand for quieter gears also requires tighter tolerances. New heat treating practices and other secondary gear operations have placed their own set of demands on manufacturers. Companies that can deburr or chamfer to these newer, more stringent specifications - and still keep costs in line - find themselves with a leg up on their competition.
Earlier this year, a relative of mine, Sidney Mandell, tragically passed away. I had the good fortune to serve with Sidney on the Board of Directors and the Executive Committee of the Machinery Dealers National Association (MDNA). Though he started before me, his MDNA career and mine overlapped for about 2 years. As I think back on the many things I learned form him, one of his favorite phrases keeps come to mind: "We walk in the footsteps of those who have gone before us."
Powder metallurgy (P/M) is a precision metal forming technology for the manufacture of parts to net or near-net shape, and it is particularly well-suited to the production of gears. Spur, bevel and helical gears all may be made by made by powder metallurgy processing.
The latest news from GKN, Milan Manufacturing, Solar Atmospheres, Heidenhain, Furnaces North America, Gleason, Haas Multigrind, Schunk and Michigan Metrology