smt - Search Results
Articles About smt
Articles are sorted by RELEVANCE. Sort by Date.
The complete product news section from the September / October 2014 Issue Gear Technology.
Onshore and offshore wind turbines boast some of the most critical assets in order to run effectively.
This paper demonstrates an application of the tooth interior fatigue fracture (TIFF) analysis method, as implemented in SMT's MASTA software, in which loaded tooth contact analysis (LTCA) results from a specialized 3-D contact model have been utilized to determine the load boundary conditions for analysis of tooth flank fracture (TFF).
News From Around the Gear Industry
A key part of gear design software development is customer feedback. With the right feedback, you can get your software developer to work for you to provide the most relevant features possible.
The complete Product News section from the January/February issue of Gear Technology.
Noise issues from gear and motor excitation whine are commonly faced by many within the EV and HEV industry. In this paper the authors present an advanced CAE methodology for troubleshooting and optimizing such NVH phenomenon.
It's more important than ever to understand the full system your individual components are going into. Here's the latest in how software developers are helping you do that.
The complete Industry News section from the August 2019 issue of Gear Technology.
The complete Industry News section from the May 2020 issue of Gear Technology.
The design of gear blanks or flanges has traditionally been driven by weight reduction. Recently innovative companies have started to use the gear blank design to tune the system dynamics to reduce gear whine.
In this article the authors present a loaded tooth contact analysis (LTCA) method for asymmetric gears that provides an accurate and efficient design tool for analyzing and comparing designs. The presented method is implemented in SMT's MASTA software. The authors also present an example comparative study using this tool for an automotive application.
MASTA 4.5.1 models complete transmissions and includes 3-D stress analysis.
The complete product news from January/February 2007, including items from SMT, Monnier+Zahner, Mahr Federal, ExxonMobil, KissSoft, Geartech, Midwest Motion, Adcole and Makino.
News Items About smt
1 SMT Announces Latest MASTA Webinar (January 19, 2021)
SMT will host a one hour overview of the new features from the upcoming release of its flagship transmission development software. Rangin... Read News
2 USMTO Shows December Orders Up, Year's Totals Down (February 22, 2016)
The U.S. Manufacturing Technology Orders report (USMTO) for December 2015 showed that order values grew 20.4 percent compared to the prio... Read News
3 USMTO Report Finds Orders Down Slightly in November (January 25, 2017)
Manufacturing technology orders declined slightly in November 2016, dropping 2.4 percent compared to October, according to the latest U.S... Read News
4 October USMTO Report Finds Slight Growth over 2015 (December 22, 2016)
Manufacturing technology orders saw year-over-year gains for the third consecutive month in October 2016, according to the latest U.S. Ma... Read News
5 USMTO August Report Finds Year-to-Date Manufacturing Technology Orders Up 15.9 Percent (October 24, 2016)
Manufacturing technology orders for August 2016 were up 15.9 percent compared to August 2015 and up 34.4 percent compared to July, accord... Read News
6 SMT Announces Formation of Smart Manufacturing Technology Japan Ltd. (September 20, 2016)
SMT is proud to announce the formation of Smart Manufacturing Technology Japan LTD. (SMTJ), a subsidiary of SMT. The new office in Japan ... Read News
7 May USMTO Report Finds Order Decline Slowing (July 26, 2016)
Manufacturing technology orders for May 2016 fell 18.2 percent compared to May 2015, according to the latest U.S. Manufacturing Technolog... Read News
8 USMTO Reports Orders Up in March, but Still Recovering (May 18, 2016)
The U.S. Manufacturing Technology Orders report (USMTO) for March 2016 showed that orders grew 36.9 percent compared to the previous mont... Read News
9 SMT to Present Paper at CTI Symposium USA (May 5, 2016)
SMT's Baydu Al will be at the CTI Symposium USA in May to present his paper, "FEA of Tooth Flank Fracture (TFF) Using Boundary C... Read News
10 USMTO February 2016 Reports Orders Down, but Some Market Conditions Improving (April 19, 2016)
The U.S. Manufacturing Technology Orders report (USMTO) for February 2016 showed that orders were down 5.1 percent compared to the previo... Read News
11 USMTO Reports Order Values Up, but Unit Sales Down (January 15, 2016)
The U.S. Manufacturing Technology Orders report (USMTO) showed that order values grew 2.2 percent in November 2015 compared to the previo... Read News
12 USMTO February Report Finds Orders up 19.6 Percent from January (April 27, 2017)
U.S. manufacturing technology orders increased more than expected in February, up 19.6 percent from January, according to the latest U.S.... Read News
13 USMTO October Report Shows Manufacturing Down 17.4 percent from 2014 (December 17, 2015)
The latest U.S. Manufacturing Technology Orders (USMTO) report showed that orders for manufacturing technology in October 2015 were down ... Read News
14 SMT Releases Masta 6 (January 14, 2015)
Smart Manufacturing Technology (SMT) recently announced the release of its CAE software, Masta 6. Masta is for transmission and drivelin... Read News
15 SMT Announces MASTA Suite 6 (September 26, 2014)
SMT (Smart Manufacturing Technology Ltd.) announces the forthcoming release of its latest edition of drivetrain design and analysis softw... Read News
16 Gleason and SMT Introduce Complete Design and Analysis Software (March 17, 2014)
Gleason Corporation and Smart Manufacturing Technology Ltd. have announced the release of the first phase of their strategic global partnership... Read News
17 USMTO Reports Manufacturing Orders Down from 2012 (September 12, 2013)
July U.S. manufacturing technology orders totaled $351.21 million according to the Association For Manufacturing Te... Read News
18 AMT Reports Latest Statistics from USMTO (December 11, 2012)
October U.S. manufacturing technology orders totaled $459.16 million according to AMT. This total, as reported by companies participating... Read News
19 Gleason and SMT Form Strategic Partnership (October 29, 2012)
Gleason Corporation and Smart Manufacturing Technology (SMT) have formed a global strategic partnership to provide gear manufacturers wor... Read News
20 USMTO Reports Increase in Manufacturing Technology Orders (March 12, 2012)
January U.S. manufacturing technology orders totaled $401.69 million according to the Association for Manufacturing Technology (AMT). Thi... Read News
21 USMTO Report Highlights Manufacturing Surge (February 17, 2012)
December U.S. manufacturing technology orders totaled $519.98 million according to the Association for Manufacturing Technology (AMT)&nbs... Read News
22 January USMTO Report Finds Manufacturing Technology Orders Down 40.7 Percent from December (April 5, 2017)
U.S. manufacturing technology orders declined in January, dropping 40.7 percent compared to December and 11.4 percent compared to January... Read News
23 May USMTO Report Finds Orders up 3.1 Percent from April, 21.8 Percent over May 2016 (August 4, 2017)
The U.S. Manufacturing Technology Orders report for May 2017 showed gains for the month and year over year, according to AMT - The Associ... Read News
24 SMT Moves Into New Nottingham Location (November 30, 2020)
SMT has relocated to a new address effective December 1, 2020. The new address is:Smart Manufacturing Technology LTD,Wilford House,1 Clif... Read News
25 SMT Offers Cylindrical Gear Microgeometry Webinar (January 29, 2020)
Join SMT for the company's first webinar of 2020. This webinar will look at Cylindrical Gear Microgeometry in MASTA, covering a range... Read News
26 SMT Releases Upcoming Training Schedule (August 19, 2020)
SMT has announced its upcoming online training workshop schedule for September including the following: Title: MASTA OverviewSeries:... Read News
27 SMT Offers Engineering Services NVH Capability Webinar (July 29, 2020)
SMT presents the webinar “SMT Engineering Services NVH Capability,” on August 12, 2020 from 8:00 – 9:00 AM EDT. This we... Read News
28 SMT Webinar Series: Custom Reporting (June 18, 2020)
Custom reporting is a powerful yet somewhat underutilized piece of functionality allowing MASTA users to streamline their workflow by cre... Read News
29 SMT Webinar Series: Troubleshooting Your MASTA model (May 8, 2020)
Sometimes MASTA models won’t run and users are tasked with the job of figuring out why. Join SMT for the fourth webinar of 2020. Th... Read News
30 SKF and SMT Collaborate on Software for Transmission Systems (April 24, 2020)
By combining SKF and SMT’s technical analysis and optimization capabilities, engineers can now have a seamless experience when desi... Read News
31 SMT Releases Latest MASTA Update (April 15, 2020)
SMT recently announced the next major release of MASTA 10.1, that is now available for all users and evaluators. This release, as with pr... Read News
32 USMTO Reports 32 Percent Decrease in Manufacturing Technology Orders (March 9, 2020)
U.S. manufacturing technology orders decreased 32 percent in January from the previous month to $269 million, according to the latest U.S... Read News
33 SMT Presents Cylindrical Gear Rating in MASTA Webinar (March 3, 2020)
SMT will present its second webinar of 2020 on March 5th. This webinar will look at ISO 6336:2019 Cylindrical Gear Rating in MASTA. This ... Read News
34 SMT Offers System Deflection Analysis Webinar (December 3, 2019)
System deflection takes misalignment into account and solves Force = Stiffness x Deflection equation for all components and connections. ... Read News
35 SMTCL EHC125300 Horizontal Turning Center Offers Large Turning Solution (August 18, 2017)
SMTCL has announced the development of a new horizontal turning center, the EHC125300. SMTCL's National Sales Representative, Chad Tu... Read News
36 SMT Releases MASTA 9 (December 13, 2018)
SMT, a globally integrated leader in mechanical transmission engineering services and software development, recently announced the next... Read News
37 SMT Launches MASTA Workshops in North America (November 30, 2018)
Due to popular demand, SMT is delighted to announce the launch of the 2019 MASTA training workshops in North America at the start of the ... Read News
38 SMT Presents MASTA 9 Overview Webinar (November 8, 2018)
SMT's next webinar will be presented by Dr. Tom Harvey, technical lead - software engineer/analyst at SMT, and will look at new funct... Read News
39 SMT Opens Office in Milton Keynes (March 15, 2018)
SMT recently announced the opening of the Milton Keynes office, the U.K.'s home of motorsport. The office will serve additional sales... Read News
40 November USMTO Reports Continued Gains, 19 Percent Improvement Over Nov. 2016 (January 31, 2018)
Orders for manufacturing technology climbed year over year and year to date in November 2017 according to the latest U.S. Manufacturing T... Read News
41 SMT Hosts MASTA Software Overview Webinar (January 29, 2018)
SMT recently announced the company will be hosting its first live and interactive MASTA webinar on January 30th at 1 pm (GMT). This first... Read News
42 USMTO Orders Push Recovery into Seventh Month (November 2, 2017)
The expansion of manufacturing technology orders slowed in August, but continued to push recovery into its third quarter according to the... Read News
43 SMT Releases MASTA 8 (September 26, 2017)
SMT is pleased to announce the next major release of its MASTA software. Available immediately for all users and evaluators, this latest ... Read News
44 June USMTO Report Shows Orders up 6.5 Percent from May (August 24, 2017)
June manufacturing technology orders climbed 6.5 percent over May, according to a report released by AMT - The Association for Manufactur... Read News
45 USMTO Reports Manufacturing Technology Consumption (December 12, 2011)
October U.S. manufacturing technology orders totaled $463.32 million according to the Association For Manufacturing Technology (AMT) an... Read News