Home | Advertise | Subscribe

Magazine | Newsletter | Product Alerts | Blog

Minimizing Gear Distortion During Heat Treating - March/April 1996

Share |

Are you featured in this article? Put a link on your website!

Archive > 1996 > March/April 1996 > Minimizing Gear Distortion During Heat Treating

The article "Minimizing Gear Distortion During Heat Treating" appeared in the March/April 1996 issue of Gear Technology.

Summary
Graded hardening technology has proven over the years to yield very good results when used in the heat treating of carburized gears. It is especially advantageous for smaller companies, subject to higher competitive pressures. Unfortunately, despite the fact that graded hardening is a very well-known method, its use has been limited. We strongly recommend this technology to all of those who need to produce gears with high metallurgical quality.

Keywords
heat treating, carburizing

The article "Minimizing Gear Distortion During Heat Treating" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.